Moxa Technologies V2201 Instructions for use

V2201 Series Hardware User Manual
Version 2.1, May 2023
www.moxa.com/products
© 2023 Moxa Inc. All rights reserved.

V2201 Series Hardware User Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance
with the terms of that agreement.
Copyright Notice
© 2023 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
•Information in this document is subject to change without notice and does not represent a commitment
on the part of Moxa.
•Moxa provides this document as is, without warranty of any kind, either expressed or implied, including,
but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or
changes to this manual, or to the products and/or the programs described in this manual, at any time.
•Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its
use.
•This product might include unintentional technical or typographical errors. Changes are periodically
made to the information herein to correct such errors, and these changes are incorporated into new
editions of the publication.
Technical Support Contact Information
www.moxa.com/support

Table of Contents
1. Introduction .........................................................................................................................................5
Package Checklist .................................................................................................................................. 5
Product Features ................................................................................................................................... 5
V2201 Hardware Specifications................................................................................................................ 5
Hardware Block Diagram ........................................................................................................................6
2. Hardware Introduction .........................................................................................................................7
Appearance........................................................................................................................................... 7
Dimensions (unit = mm) ........................................................................................................................8
LED Indicators....................................................................................................................................... 9
Reset Button ......................................................................................................................................... 9
3. Hardware Connection Description.......................................................................................................10
Installing the V2201............................................................................................................................. 10
Wiring Requirements............................................................................................................................ 12
Connecting the Power ................................................................................................................... 13
Grounding the Unit ....................................................................................................................... 13
Connecting Data Transmission Cables .................................................................................................... 14
Installing the Wireless Modules ...................................................................................................... 14
Connecting to the Network ............................................................................................................ 16
Connecting to a Serial Device ........................................................................................................ 17
Installing an SDHC/SDXC Card....................................................................................................... 17
Connecting to a USB Device .................................................................................................................. 18
DI/DO ................................................................................................................................................ 18
Connecting to an HDMI Monitor ............................................................................................................. 19
RTC Battery Replacement ..................................................................................................................... 20
4. BIOS Setup .........................................................................................................................................21
Entering the BIOS Setup....................................................................................................................... 21
Main Information ................................................................................................................................. 22
Advanced Settings ............................................................................................................................... 23
Boot Configuration........................................................................................................................ 23
PCI Express Configuration ............................................................................................................. 24
USB Configuration ........................................................................................................................ 24
SD Configuration .......................................................................................................................... 25
Miscellaneous Configuration........................................................................................................... 26
SATA Configuration ...................................................................................................................... 27
Console Redirection ...................................................................................................................... 28
Hardware Monitor......................................................................................................................... 29
SMART RECOVERY Info ................................................................................................................. 29
Security Settings ................................................................................................................................. 30
Set Supervisor Password ............................................................................................................... 30
Power Settings .................................................................................................................................... 31
Wake on LAN ............................................................................................................................... 31
Auto Wake on S5 ......................................................................................................................... 31
Boot Settings ...................................................................................................................................... 33
Boot Type.................................................................................................................................... 33
PXE Boot to LAN........................................................................................................................... 33
PXE Boot capability....................................................................................................................... 33
Add Boot Options ......................................................................................................................... 33
USB Boot .................................................................................................................................... 34
Boot Delay Time........................................................................................................................... 34
Automatic Failover........................................................................................................................ 34
Boot Order Priority ....................................................................................................................... 34
Legacy ........................................................................................................................................ 34
EFI .................................................................................................................................................... 35
Exit Settings ....................................................................................................................................... 35
Exit Saving Changes ..................................................................................................................... 36
Save Change Without Exit ............................................................................................................. 36
Exit Discarding Changes................................................................................................................ 36
Load Optimal Defaults................................................................................................................... 36

Load Custom Defaults ................................................................................................................... 36
Save Custom Defaults................................................................................................................... 36
Discard Changes .......................................................................................................................... 36
Upgrading the BIOS ............................................................................................................................. 37
A. Regulatory Approval Statement..........................................................................................................40

V2201 Series Hardware User Manual
5
1. Introduction
Moxa’s V2201 ultra-compact x86 embedded computers are based on the Intel® Atom™ E3800 series
processor, feature the most reliable I/O design to maximize connectivity, and support dual wireless
modules, making them suitable for a diverse range of communication applications. The computers’ thermal
design ensures reliable operation in temperatures ranging from -40 to 85°C (-40 to 70°C for wireless
operation with a special-purpose Moxa wireless module installed). The V2201 series supports “Moxa
Hardware Monitoring” for device I/O status monitoring and alerts, system temperature monitoring and
alerts, and system power management. Monitoring system status closely makes it easier to recover from
errors and provides the most reliable platform for your applications.
Package Checklist
Each model is shipped with the following items:
•V2201 embedded computer
•Terminal block to power jack converter
•Wall mounting kit
•Documentation and software CD or DVD
•Quick installation guide (printed)
•Warranty card
NOTE
Please notify your sales representative if any of the above items are missing or damaged.
Product Features
V2201 embedded computers support the following features:
•Intel Atom® E3800 Series processor with three performance options
•Dual Mini PCIe sockets for wireless modules
•-40 to 85°C system operating temperature
•Variety of interfaces: 2 serial ports, 2 Ethernet LAN ports, 4 DIs, 4 DOs, SD,
•USB, HDMI, wireless
•EN 61000-6-2 and EN 61000-6-4 certification*; meets EMC standard for
•heavy industry
•Up to 5 Grms anti-vibration protection and 100 g/11 ms anti-shock protection
•Moxa Smart Recovery utility to recover system from boot failure (W7E only)
*Passed with AC/DC adapter.
V2201 Hardware Specifications
NOTE
The latest specifications for Moxa’s products can be found at https://www.moxa.com.

V2201 Series Hardware User Manual
6
Hardware Block Diagram

V2201 Series Hardware User Manual
7
2. Hardware Introduction
The V2201 series embedded computers are compact, well-designed, and rugged enough for industrial
applications. LED indicators help you monitor performance and identify trouble spots, multiple serial ports
allow you to connect different devices for wireless operation, and the reliable and stable hardware platform
lets you devote your attention to developing your applications.
Appearance
Front View
Right Side View

V2201 Series Hardware User Manual
8
Left Side View
Dimensions (unit = mm)

V2201 Series Hardware User Manual
9
LED Indicators
LED Name
Status
Function
Power
Green
Power is on and computer is functioning normally.
Off
Power is off
User Defined
Red
Event has occurred
Off
No alert
mSATA
Yellow
Blinking: Data is being transmitted
Off
Not connected / No data transmission
SD Card
Yellow
Blinking: Data is being transmitted
Off
Not connected / No data transmission
Wireless 1 Green
Steady On: Link is On
Blinking: Data is being transmitted
Off
Not connected
Wireless 2 Green
Steady On: Link is On
Blinking: Data is being transmitted
Off
Not connected
LAN 1
Yellow
Steady On: 1000 Mbps Ethernet link
Blinking: Data is being transmitted
Green
Steady On: 100 Mbps Ethernet link
Blinking: Data is being transmitted
Off
10 Mbps Ethernet link or LAN is not connected
LAN 2
Yellow
Steady On: 1000 Mbps Ethernet link
Blinking: Data is being transmitted
Green
Steady On: 100 Mbps Ethernet link
Blinking: Data is being transmitted
Off
10 Mbps Ethernet link or LAN is not connected
Tx 1
Green
Blinking: Data is being transmitted
Off
Not connected
Tx 2
Green
Blinking: Data is being transmitted
Off
Not connected
Rx 1
Yellow
Blinking: Data is being transmitted
Off
Not connected
Rx 2
Yellow
Blinking: Data is being transmitted
Off
Not connected
Reset Button
Press the “Reset Button” on the left side panel of the V2201 to reboot the system automatically.

V2201 Series Hardware User Manual
10
3. Hardware Connection Description
In this chapter, we show how to connect the embedded computers to the network and to various devices.
Installing the V2201
Wall or Cabinet Mounting
The V2201 comes with two metal brackets for attaching it to a wall or the inside of a cabinet.
Step 1: Use two screws for each bracket and attach the brackets to the rear of the V2201.
Step 2: Use four screws per side to attach the V2201 to a wall or cabinet.

V2201 Series Hardware User Manual
11
Din-Rail Mounting
The V2201 can be installed on a DIN rail with the optional DIN-rail kit. This DIN-rail kit must be purchased
separately. The DIN-rail kit includes one DIN-rail bracket and four screws.
The DK-DC50131 die-cast metal kit must be purchased separately. The kit is easy to install and makes the
operation of the V2201 more robust. To install the DIN-rail mounting kit, use 4 screws to tightly attach the
DIN-rail mounting bracket to the V2201’s side panel.
NOTE
Use all four screws to ensure that the V2201 is safely and securely installed on the DIN rail.
Installation:
STEP 1:
Insert the upper lip of the DIN ra
il into the DIN-rail mounting kit.
STEP 2:
Press the V2201 towards the DIN
rail until it snaps into place.

V2201 Series Hardware User Manual
12
Removal:
STEP 1:
Pull down the latch on the mounting kit with a
screwdriver.
STEPS 2 & 3:
Slightly pull the V2201 forward and lift
it up to remove
it from the DIN
-rail.
STEP 4:
Press the recessed button on the spring
-loaded bracket to lock it
into position for next use.
Wiring Requirements
In this section, we describe how to connect serial devices to the V2201 embedded computer.
Be sure to read and follow these common safety precautions before proceeding with the installation of any
electronic device:
•Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must
cross, make sure the wires are perpendicular at the intersection point.
NOTE
Do not run signal or communication wiring together with power wiring in the same wire conduit. To avoid
interference, wires with different signal characteristics should be routed separately.
•Use the type of signal transmitted through a wire to determine which wires should be kept separate.
The rule of thumb is that wiring that shares similar electrical characteristics can be bundled together.
•Keep input wiring and output wiring separate.
•It is advisable to label the wiring to all devices in the system.

V2201 Series Hardware User Manual
13
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or wiring your V2201.
Wiring Caution!
Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes
dictating the maximum current allowable for each wire size. If the current goes above the maximum
ratings, the wiring could overheat, causing serious damage to your equipment.
Temperature Caution!
Be careful when handling the unit. When the unit is plugged in, the internal components generate heat,
and consequently the outer casing may feel hot to the touch.
Connecting the Power
To power on the V2201, connect the “terminal block to power jack converter” to the V2201’s DC terminal
block (located on the left side panel), and then connect the power adapter. The system is automatically
turned on by default when the power is plugged in. If it does not turn on automatically, press the Power
Button to turn on the computer. Note that the Shielded Ground wire should be connected to the top pin of
the terminal block. It takes about 30 seconds for the system to boot up. Once the system is ready, the
Power LED will light up.
Grounding the Unit
Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run
the ground connection from the grounding screw (M4) to the grounding surface prior to connecting the
power.
ATTENTION
This product is intended to be mounted onto a well-grounded mounting surface, such as a metal panel.
SG: The Shielded Ground (sometimes called Protected Ground) contact is
the right
-most one of the 3-
pin power terminal block connector when viewed
from the angle shown here. Connect the SG wire to an appropriate grounded
metal surface.

V2201 Series Hardware User Manual
14
Connecting Data Transmission Cables
In this section, we describe how to connect the V2201 embedded computer to a network and serial devices.
Installing the Wireless Modules
ATTENTION
V2201 series “-W” models (e.g., V2201-E2-W-T) include a cellular card heat sink and 5 x wireless SMA
connectors, which are installed during the production process.
The V2201 features two mini-PCIe sockets on the bottom panel. One socket supports USB signals only using
MC9090, MC7354, or MC7354 mini-PCIe cards. The other socket supports standard USB + PCIe signals.
Step 1: Loosen the four screws in the middle of the bottom panel and open the bottom cover.
There are two mini-PCIe sockets:
Socket 1: USB signal, for 3G/LTE mini-PCIe card (Sierra Wireless MC9090, MC7304, MC7354).
NOTE
Cellular card heat sink is installed in socket 1.
Socket 2: Standard USB + PCIe signal, for Wi-Fi mini-PCIe cards.
Step 2: Insert the wireless module card at an angle.

V2201 Series Hardware User Manual
15
Step 3: Push down the wireless module card and then use the 2 screws included in the package to attach
it to the V2201.
Step 4: Connect the connectors with the corresponding wireless module cards.
The following figure identifies the 5 connectors in the mini-PCIe sockets:
No.1 & No.3: Wi-Fi mini-PCIe card
No.2 & No.4: 3G/LTE mini-PCIe card
No.5: GPS
Step 5: Replace the bottom cover.
Step 6: You may also purchase external antennas from Moxa. Please contact a Moxa sales representative
for information. When the external antennas are installed, the product should appear as shown
below:

V2201 Series Hardware User Manual
16
Connecting to the Network
Connect your network cable to the embedded computer’s Ethernet port. The other end of the cable should
be connected to your Ethernet network. When the cable is properly connected, the LEDs on the embedded
computer’s Ethernet port turn on to indicate a valid connection.
Two 10/100/1000 Mbps Ethernet ports using RJ45 connectors are located on the front panel of the
embedded computer. See the following figure for the location of the Ethernet ports and the pin assignments.
NOTE
The pin assignments for the V2201 computer’s Ethernet port are shown in the following figure. If you
create your own Ethernet cable, make sure that you match the pin assignments on the connector of the
Ethernet cable.
Pin
10/100 Mbps
1000 Mbps
1
ETx+
TRD(0)+
2
ETx-
TRD(0)-
3
ERx+
TRD(1)+
4
–
TRD(2)+
5
–
TRD(2)-
6
ERx-
TRD(1)-
7
–
TRD(3)+
8
–
TRD(3)-

V2201 Series Hardware User Manual
17
Connecting to a Serial Device
Use a serial cable to connect your serial device to the embedded computer’s serial port. Serial ports P1 to
P2 have male DB9 connectors and can be configured for RS-232, RS-422, or RS-485 communication (refer
to the software manual for your operating system version). The pin assignments are shown in the following
table:
DB9 Male Port
RS-232/422/485 Pinouts
Pin
RS-232
RS-422
RS-485 (4-wire)
RS-485 (2-wire)
1
DCD
TxDA(-)
TxDA(-)
–
2
RxD
TxDB(+)
TxDB(+)
–
3
TxD
RxDB(+)
RxDB(+)
DataB(+)
4
DTR
RxDA(-)
RxDA(-)
DataA(-)
5
GND
GND
GND
GND
6
DSR
–
–
–
7
RTS
–
–
–
8
CTS
–
–
–
Installing an SDHC/SDXC Card
The V2201 has an SD slot for storage expansion. The SD slot allows users to plug in a Secure Digital (SD)
memory card compliant with the SD 3.0 standard. The following steps show how to install the SD card.
1. Disconnect the V2201 from its power source.
2. The SD slot is located on the right side of the front panel. Loosen the screws on the SD/SIM card cover.
3. Press the SD card to eject it.
When you want to insert it back into the SD slot, slide it into the slot and then push it in with your
finger until it latches firmly.
ATTENTION
Be sure to properly orient the CFast card when installing it; otherwise, you may not be able to insert the
card all the way into the slot.
4. After the SD card is installed correctly, fasten the screws on the SD/SIM card cover.

V2201 Series Hardware User Manual
18
Connecting to a USB Device
The V2201 comes with one USB 3.0 host with type-A connector on the right-side panel and two USB 2.0
hosts with type-A connectors on the front panel. These ports can be used for connecting to an external flash
disk or hard drive for storing data. You can also use these USB ports to connect to a keyboard or a mouse.
The following figures show the locations of the USB ports.
DI/DO
The V2201 comes with a 4-ch digital input and a 4-ch digital output that connect through a terminal block
connector. The pin assignments and wiring methods are shown below:

V2201 Series Hardware User Manual
19
DI Dry Contact
DI Wet Contact
DO Contact
Connecting to an HDMI Monitor
The V2201 comes with a type A HDMI female connector on the front panel to connect an HDMI monitor. The
hole above the HDMI connector can be used to install a customized lock for the HDMI connector.
NOTE
The locking arrangement may vary depending on the HDMI connector type. Contact a Moxa sales
representative if you would like to order a customized lock.
The HDMI Lock

V2201 Series Hardware User Manual
20
After Installing the Lock
RTC Battery Replacement
The V2201’s real-time clock is powered by a lithium battery. We strongly recommend that you do not
replace the lithium battery without help from a qualified Moxa support engineer. If you need to change the
battery, contact the Moxa RMA service team.
ATTENTION
There is a risk of explosion if the battery is replaced by an incorrect type of battery.
NOTE
The V2201 embedded computer can be customized to support an easy RTC battery replacement function.
Please contact your Moxa sales representative for details.