Moxa Technologies UPort 200A Series User manual

P/N: 1802002004001
*1802002004001*
UPort™ 200A Series
Quick Installation Guide
Version 1.0, December 2022
Technical Support Contact Information
www.moxa.com/support
2022 Moxa Inc. All rights reserved.

- 2 -
Overview
The UPort™ 200A Series general-purpose USB 3.2 Gen 1 hubs expand 1
USB port to 4 or 7 ports. The hubs provide true USB 3.2 SuperSpeed 5
Gbps data transmission through each port and are USB-IF compatible
products. Besides providing ESD level 4 protection from static damage
and surge protection level 2 for power input, the UPort™ 200A Series
offers a power jack power input solution for general environments.
The following models comprise the UPort™ 200A Series:
UPort™ 204A:
4-port general-purpose USB hub, standard temperature
0 to 6
0°C (32 to 140°F), adapter included
UPort™
207A:
7
-port general-purpose
USB hub, standard temperature
0 to 60°C (32 to 140°F), adapter included
Features
•SuperSpeed USB 3.2 Gen 1 for up to 5 Gbps USB transmission
•Provides level 4 ESD protection and level 2 surge protection for
power input
•Rugged metal housing
•Side-mount DIN Rail and wall mountable
Package Checklist
The UPort™ 200A Series package should contain the following items. If
any of these items are missing or damaged, please contact Moxa for
replacement.
•UPort 200A USB hub
•USB 3.2 Gen 1 cable: CBL-USB3-BA-BLK-120, 1.2 m
•100 to 240 VAC, 0 to 40°C (32 to 104°F) power adapter suitable for
your region
•Quick installation guide (printed)
•Warranty card
Optional Accessories (can be purchased separately)
•Standard USB cable: CBL-USB3-BA-BK-120, 1.2 m
•WK-UP200A-BAK-SI: Wall-mounting kit for the back side of the
UPort 200A with 2 plates (60 x 27 x 2 mm/2.36 x 1.06 x 0.08 in)
and 6 screws (M3x5mm)
•WK-UP200A-BOT-SI: Wall-mounting kit for the bottom side of the
UPort 200A with 2 plates (43 x 30 x 2 mm/1.69 x 1.18 x 0.08 in)
and 6 screws (M3 x 5 mm)
•DK-UP-42A: Side-mount DIN Rail (107 x 29 mm/4.21 x 1.14 in)
with 4 screws (M3 x 5 mm).
NOTE
The operating temperature of the power adapter in the box is
from
0 to 40°C (32 to 104 °F). If your application is not in this
range, please use a power adapter supplied by UL Listed
External Power
Supply (The power output meets SELF/ES1 and
LPS and rated 12 VDC,
4.5 A @ 12 VDC minimum for the
UPort
2
07A models, 2.65 A @ 12 VDC minimum for the UPort 204A
models
), highest minimum temperature 60°C (140°F). If using
a Class I adapter, the power cord
must be connected to a
socket-outlet with an earthing connection.

- 3 -
Hardware Introduction
An example of the UPort™ 204A front panel:
Front View
Side View - Power Input 12 VDC
Installation Guide
Power Input Supply
The UPort 200A comes with self-power, minimum required 12 V input,
4.5 A @ 12 VDC minimum for the UPort 207A models, 2.65 A @ 12 VDC
minimum for the UPort 204A models.
LED Indicators
The LED indicators on the front panel are used to display status as
follows:
Type
Color
Definition
Power
Green
Power on
Off
Unit is not powered or out of operation

- 4 -
Wall Mounting
The UPort™ 200A Series comes with two options of wall mounting, and
both have metal attachment plates to allow installation on a wall.
Option 1 – Bottom-mounting with WK-UP200A-BOT-SI
UPortTM 207A
Unit: mm (inches)
UPortTM 204A
The mounting kit is 2 mm in height,
and the two centers of the mounting
kit on each plate is
163 mm (UPort
207A
) and 123 mm (UPort 204A)
apart.
First, attach the brackets at the
bottom of the UPort™
200A
with
the
screws, as the circles show.
The r
ecommended screw
tightening torque: 4.5 kgf
-cm
+/
- 0.5, screw type: type F,
PH2. Next, mount the unit to a
wall with the screws.

- 5 -
The wall screws should use the M3
type
, and the length should no less
than 7 mm.
Option 2 – Rear-mounting with WK-UP200A-BAK-SI
UPortTM 207A
Unit: mm (inches)
UPortTM 204A
First, attach the brackets at the
rear of the UPort™
200A with
the
screws,
as the circles show. The
r
ecommended screw tightening
torque: 4.5 kgf
-cm +/- 0.5,
screw type: type F, PH2. Next,
mount the unit to a wall with the
screws.
The wall screws should use the M3 type, and
the
length should be no less than 7 mm.
The mounting kit is 2 mm in height, and the two centers of mounting
kit on each plate is 168 mm (for UPort 207A) and 128 mm (for UPort
204A) apart.

- 6 -
UPortTM 207A
Unit: mm (inches)
UPortTM 204A
DIN-Rail Mounting
The UPort™ 200A Series has a DIN-rail kit option (DK-UP-42A) to allow
installation on a DIN Rail. DIN-rail attachments can be purchased
separately to attach the product to a DIN Rail. The DIN-rail
attachments should be oriented with the metal springs on top.
First, attach the DIN-rail attachments to the rear of the UPort™ 200A
with screws, showed by the circles. The recommended screw tightening
torque: 4.5 kgf-cm +/- 0.5, screw type: type F, PH2.
UPort™ 207A
UPort™ 204A
Next, mount the UPort™ 200A onto the mounting rail.
STEP 1: Insert the upper lip of
the DIN
-rail kit into the mounting
rail.
STEP 2: Press the UPort™ 200A
towards the mounting rail until it
snaps into place.

- 7 -
To remove the UPort™ 200A from the DIN Rail, do the following:
STEP 1:
Pull down the latch on
the DIN-
rail kit
with a screwdriver.
STEP 2 & 3:
Slightly pull the
UPort™ 200A
forward
and lift it up to remove it from the
mounting rail.
Dimensions
UPortTM 207A

- 8 -
UPortTM 204A
Specification
USB Interface
Compliance
USB 3.2/2.0/1.1, BC 1.2 compatible
Upstream
1 USB Type-B port
Downstream
UPort™ 204A: 4 USB Type-A ports
UPort™ 207A: 7 USB Type-A ports
Speed 5 Gbps (SuperSpeed USB), 480 Mbps (Hi-s
peed
USB) and 12 Mbps (Full-speed USB)
Physical Characteristics
Housing
Metal
Dimensions UPort™ 204A: 85 x 27 x 100 mm (3.35 x 1.06
x 3.94 in)
UPort™ 207A: 80 x 27 x 140 mm (3.15 x 1.06
x 5.51 in)
Environmental Limits
Operating
Temperature
0 to 60°C (32 to 140°F)
Operating Humidity
5 to 95% RH
(For use in Pollution Degree 2 environments)
Storage Temperature
-20 to 75°C (-4 to 167°F)

- 9 -
Power Requirements
Input Voltage
12 VDC (external power)
Power Consumption UPort™ 204A: 2650 mA @ 12 VDC
UPort™ 207A: 4500 mA @ 12 VDC
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Compliance Notice
CE Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user
may be required to take appropriate measures.
Federal Communications Commission Statement
FCC - This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Warning
This equipment has been tested and found to comply with the
limits for a Class A
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if
not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense

- 10 -
사용자안내문 (User Guide)
이기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은
기기로서가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다.
(This equipment has KC approval for use in industrial environmentsand
could possibly interfere with household equipment.)
기종별
Type of Equipment
사용자안내문
User Guide
A 급기기 (업무용 방송
통신기 자재)
Class A Equipment
(Broadcasting and
Communication Equipment for
Industrial and Commercial Use)
이기기는 업무용 (A 급)전자파 적합
기기로서 판매자 또는 사용자는 이
점을 주의하시기 바라며 가정 외의
지역에서 사용하는 것을 목적으로
합니다.
This equipment is the EMC conformity
equipment (Class A) for I
ndustrial and
Commercial Use. The seller or user
should take note of this as this
equipment can be used in places that
exclude homes.
B 급기기 (가정용 방송 통신
기자재)
Class B Equipment
(Broadcasting and
Communication Equipment for
Home Use)
이지기는 가정용 (B 급)전자파적합
기기로서 주로 가정에서 사용하는
것을 목적으로 하며, 모든 지역에서
사용할 수있습니다.
This equipment is the EMC conformity
equipment (Class B) for Home Use
and can be used mainly at homes, as
well as in other areas.
FAQ
Q:
Does the UPort™ 200A require a software driver?
A:
UPort™
200A is USB-IF compatible; it works with major operation
systems and does not require an additional driver.
Q:
How many USB devise cascade can the UPort 200A support?
A:
Five layers. By the definition of USB-IF, there should be seven
layers for USB device cascading
. The host computer and the UPort
200A
have each taken one layer already; therefore, five layers
remain available for cascading. There are some cases the host
computer design may take more than one layer
; the availability of
cascading layers may vary.