Moxa Technologies EtherDevice Manual

Moxa EtherDevice Server
Hardware Installation Guide
Fourth Edition, June 2008
©2008 Moxa Inc., all rights reserved.
Reproduction without permission is prohibited.

Moxa EtherDevice Server (EDS)
Hardware Installation Guide
The software described in this manual is furnished under a license agreement and may be used only in
accordance with the terms of that agreement.
Copyright Notice
Copyright ©2008 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
MOXA is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a
commitment on the part of Moxa.
Moxa provides this document “as is,” without warranty of any kind, either expressed or implied,
including, but not limited to, its particular purpose. Moxa reserves the right to make improvements
and/or changes to this manual, or to the products and/or the programs described in this manual, at any
time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa
Technologies assumes no responsibility for its use, or for any infringements on the rights of third
parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically
made to the information herein to correct such errors, and these changes are incorporated into new
editions of the publication.

Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll-free: 1-888-669-2872
Tel: [phone]
Fax: [phone]
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel: [phone]
Fax: [phone]
Moxa Europe:
Tel: [phone]
Fax: [phone]
Moxa Asia-Pacific:
Tel: [phone]
Fax: [phone]

Table of Contents
1. Introduction.................................................................................. 1-1
Inside the Future of IndustrialEthernet Technology......................... 1-2
Moxa EtherDevice Server™........................................................ 1-2
Package Checklist....................................................................... 1-4
Features ...................................................................................... 1-5
Specifications............................................................................... 1-6
Top/Front/Rear Panel Views of ED6008...................................... 1-9
Top/Front/Rear Panel Views of ED6008-M-SC........................... 1-10
Top/Front/Rear Panel Views of ED6008-S-SC............................ 1-11
Top/Front/Rear Panel Views of ED6008-MM-SC........................ 1-12
Top/Front/Rear Panel Views of ED6008-SS-SC ......................... 1-13
2. Installing Moxa EtherDevice Server........................................... 2-1
Mounting Dimensions.................................................................. 2-2
DIN-Rail Mounting....................................................................... 2-3
Wall Mounting.............................................................................. 2-4
3. Wiring Moxa EtherDevice Server ............................................... 3-1
Wiring Requirements................................................................... 3-2
Grounding Moxa EtherDevice Server.......................................... 3-4
Wiring the Alarm Contact............................................................. 3-5
Wiring the Redundant Power Inputs............................................ 3-5
Communication Connections ...................................................... 3-8
RS-232 Connection............................................................... 3-9
10/100BaseTx Ethernet Port Connection............................. 3-11
100BaseFx Ethernet Port Connection.................................. 3-14

4. Hardware Overview ......................................................................4-1
Redundant Power Inputs..............................................................4-2
Alarm Contact...............................................................................4-2
LED Indicators..............................................................................4-3
Auto MDI/MDI-X Connection........................................................4-4
Fiber Ports....................................................................................4-5
Dual Speed Functionality and Switching......................................4-6
Switching, Filtering, and Forwarding............................................4-6
Switching and Address Learning..................................................4-7
Auto-Negotiation and Speed Sensing..........................................4-7

1
1
1 Introduction
Welcome to Moxa EtherDevice Server™, the redundant and
intelligent 8-port Industrial Ethernet Switch.
The following topics are covered in this chapter:
Inside the Future of Industrial Ethernet Technology
Moxa EtherDevice Server™
Package Checklist
Features
Specifications
Top/Front/Rear Panel Views of ED6008
Top/Front/Rear Panel Views of ED6008-M-SC
Top/Front/Rear Panel Views of ED6008-S-SC
Top/Front/Rear Panel Views of ED6008-MM-SC
Top/Front/Rear Panel Views of ED6008-SS-SC

Inside the Future of Industrial Ethernet Technology
The trend in industrial communications and automation
applications
As the world’s network and information technology becomes
more mature, the trend is to use Ethernet as the major
communications interface in many industrial communications
and automation applications. In fact, a whole new industry has
sprung up to provide Ethernet products that comply with the
requirements of demanding industrial applications.
Industrial vs. Commercial
Users have found that when moving Ethernet from the
comfortable office environment to the harsh and less
predictable industrial environment, the commercial Ethernet
equipment available in today’s market simply cannot meet the
high reliability requirements demanded by industrial applications.
This means that a more robust type of network equipment,
commonly referred to as industrial Ethernet equipment, is
required for these applications.
Informative vs. Passive
Since industrial Ethernet devices are often located at the
endpoints of a system, such devices cannot always know
what’s happening elsewhere on the network. This means that
industrial Ethernet communication equipment that connects
these devices must take responsibility for providing system
maintainers with real-time alarm messages.
Moxa EtherDevice Server™
MOXA EtherDevice Server Hardware Installation Guide
1-2

Introduction
Moxa EtherDevice Server comes with a suite of useful
maintenance and monitoring functions, and is designed to provide
smooth and reliable operation in harsh industrial environments.
You will find that Moxa EtherDevice Server establishes a new
industrial Ethernet benchmark. It is excellent for keeping
automation systems running continuously, is ideal for sending
status reports to help prevent system damages and losses, is a
great tool for mastering your industrial Ethernet networks, and is
well-suited for use with industrial device control networks.
These products have a wide operating temperature range, from -40
to 75°C, and are designed to withstand a high degree of vibration
and shock. The rugged hardware design makes ED6008 Series
perfect for ensuring that your Ethernet equipment can withstand
critical industrial applications, such as in hazardous locations
(Class 1 Division 2/ Zone 2), and complies with FCC, TÜV, UL, and
CE Standards.
NOTE Throughout this User’s Manual, we often use EDS as an
abbreviation for Moxa EtherDevice Server:
EDS = Moxa EtherDevice Server
MOXA EtherDevice Server Hardware Installation Guide 1-3

Package Checklist
Moxa EtherDevice Server is shipped with the following items. If any
of these items is missing or damaged, please contact your
customer service representative for assistance.
Moxa EtherDevice Server
Hardware Installation Guide and User’s Manual
Moxa Product Warranty booklet
Panel mounting kit
Console port cable (RJ45 to DB9)
Protective caps for unused ports
MOXA EtherDevice Server Hardware Installation Guide
1-4

Introduction
Features
Excellent for keeping automation systems running continuously
zLine-Swap fast recovery (patent pending)
zRedundant Ethernet Ring capability
zRedundant power inputs
zHardened design for harsh environments
Operating temperature ranges from 0 to 60°C, or extended
operting temperature from –40 to 75°C for (-T) models
IP 30, rugged high-strength case
Fanless design
DIN-Rail or panel mounting ability
zWatch-dog self-saver™
Dynamically know the status of networked industrial devices
zAutomatically sends warning e-mail when an exception is
detected
zAutomatically sends warning e-mail when Ethernet traffic builds
up
zSignals the system administrator via a Digital Output (DO) line
when a malfunction occurs
Key management functions let you easily master your industrial
Ethernet network
zSet up a mirror port for better online data monitoring
zAssign IP addresses to connected devices
zSend ping commands to identify network segment integrity
zEasily test cable wiring
MOXA EtherDevice Server Hardware Installation Guide 1-5

Specifications
Interface
RJ45 Ports 10/100BaseT(X) auto negotiation
speed, F/H duplex mode, and auto
MDI/MDI-X connection
Fiber Ports 100BaseFX ports (SC connector)
LED Indicators Power, Faults, ACT, LNK, 10/100
Alarm Contact One relay output, current carrying
capacity of 1A @ 24 VDC
Technology
Standards IEEE802.3, 802.3u, 802.3x, 802.1D
Forward and Filtering Rate 148810 pps
Packet Buffer Memory 256 KB
Processing Type Store and Forward, with IEEE802.3x
full duplex, non-blocking flow control
Address Table Size 4K uni-cast addresses
Management SNMP V1.2c, MIB-II, Ethernet-like MIB,
EDS-SNMP OPC Server (Optional)
Optical Fiber
Distance Single mode fiber for 15 km,
Multi mode fiber for 2 km
Wavelength 1310 nm
Min. TX Output -15 dBm (Single), -20 dBm (Multi)
Max. TX Output -6 dBm (Single), -14 dBm (Multi)
Sensitivity -36 ~ -32 dBm (Single),
-34 ~ -30 dBm (Multi)
MOXA EtherDevice Server Hardware Installation Guide
1-6

Introduction
Power
Input Voltage Dual redundant inputs
9 to 32 VDC, previous Rev.
12 to 48 VDC, Rev. 2.0 & 2.1 or later
Input Current (@24V) 0.35A (ED6008)
0.45A (ED6008-M-SC, ED6008-S-SC)
0.55A (ED6008-MM-SC,
ED6008-SS-SC)
Connection Removable Terminal Block
(maximum cable diameter = 1.5 mm)
Overload Current Protection Present, can withstand 3.75A
Reverse Polarity Protection Present
Mechanical
Casing IP30 protection, aluminum case
Dimensions 51.8 × 136.7 × 101.2 mm
(W × H × D)
Weight 0.57 kg
Installation DIN-Rail, Wall Mounting
Environment
Operating Temperature 0°C to 60°C (32°F to 140°F)
-40°C to 75°C (-40°F to 167°F) -T
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity 5% to 95% (non-condensing)
MOXA EtherDevice Server Hardware Installation Guide 1-7

Before connecting ED6008 to 12 to 48 VDC power inputs, verify
the ED6008 Rev. is 2.0 & 2.1 or later on the side label..
Regulatory Approvals
Safety UL60950, UL 508, CSA C22.2
No. 60950, EN60950
Hazardous Location UL/cUL Class I, Division 2,
Groups A, B, C and D
ATEX Class I, Zone 2, EEx nC IIC
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), Level 3
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 3
EN61000-4-5 (Surge), Level 3
EN61000-4-6 (CS), Level 3
Laser Protection Class 1, complies with EN60825
Shock IEC 60068-2-27
Free Fall IEC 60068-2-32
Vibration IEC 60068-2-6
MTBF 230,000 hours
WARRANTY 5 years
MOXA EtherDevice Server Hardware Installation Guide
1-8

Introduction
Top/Front/Rear Panel Views of ED6008
1. Heat dissipation orifices
2. RS-232 console port (RJ45)
3. Alarm contact
4. Power input P2
5. Power input P1
6. Power input P1 LED
7. Power input P2 LED
8. Fault LED
9. Model Name: ED6008
10. Port 8: 10/100BaseT(X)
11. Port 7: 10/100BaseT(X)
12. Ports 1 to 6: 10/100BaseT(X)
13. 100/LNK/ACT LED
14. 10/LNK/ACT LED
15. DIN-Rail attachment plate
16. Spring for vertical DIN-Rail attachment
17. Plastic support for vertical DIN-Rail
attachment
18. Spring for horizontal DIN-Rail attachment
19. Plastic supports for horizontal DIN-Rail
attachment
MOXA EtherDevice Server Hardware Installation Guide 1-9

Top/Front/Rear Panel Views of ED6008-M-SC
1. Heat dissipation orifices
2. RS-232 console port (RJ45)
3. Alarm contact
4. Power input P2
5. Power input P1
6. Power input P1 LED
7. Power input P2 LED
8. Fault LED
9. Model Name: ED6008-M-SC
10. Port 8: Multi mode 100BaseFX (SC
connector)
11. Port 7: 10/100BaseT(X)
12. Ports 1 to 6: 10/100BaseT(X)
13. 100/LNK/ACT LED
14. 10/LNK/ACT LED
15. DIN-Rail attachment plate
16. Spring for vertical DIN-Rail attachment
17. Plastic support for vertical DIN-Rail
attachment
18. Spring for horizontal DIN-Rail attachment
19. Plastic supports for horizontal DIN-Rail
attachment
MOXA EtherDevice Server Hardware Installation Guide
1-10

Introduction
Top/Front/Rear Panel Views of ED6008-S-SC
1. Heat dissipation orifices
2. RS-232 console port (RJ45)
3. Alarm contact
4. Power input P2
5. Power input P1
6. Power input P1 LED
7. Power input P2 LED
8. Fault LED
9. Model Name: ED6008-S-SC
10. Port 8: Single mode 100BaseFX
(SC connector)
11. Port 7: 10/100BaseT(X)
12. Ports 1 to 6: 10/100BaseT(X)
13. 100/LNK/ACT LED
14. 10/LNK/ACT LED
15. DIN-Rail attachment plate
16. Spring for vertical DIN-Rail attachment
17. Plastic support for vertical DIN-Rail
attachment
18. Spring for horizontal DIN-Rail attachment
19. Plastic supports for horizontal DIN-Rail
attachment
MOXA EtherDevice Server Hardware Installation Guide
1-11

Top/Front/Rear Panel Views of ED6008-MM-SC
1. Heat dissipation orifices
2. RS-232 console port (RJ45)
3. Alarm contact
4. Power input P2
5. Power input P1
6. Power input P1 LED
7. Power input P2 LED
8. Fault LED
9. Model Name: ED6008-MM-SC
10. Port 8: Multi mode 100BaseFX
(SC connector)
11. Port 7: Multi mode 100BaseFX
(SC connector)
12. Ports 1 to 6: 10/100BaseT(X)
13. 100/LNK/ACT LED
14. 10/LNK/ACT LED
15. DIN-Rail attachment plate
16. Spring for vertical DIN-Rail attachment
17. Plastic support for vertical DIN-Rail attachment
18. Spring for horizontal DIN-Rail attachment
19. Plastic supports for horizontal DIN-Rail
attachment
MOXA EtherDevice Server Hardware Installation Guide
1-12

Introduction
Top/Front/Rear Panel Views of ED6008-SS-SC
MOXA EtherDevice Server Hardware Installation Guide
1-13
1. Heat dissipation orifices
2. RS-232 console port (RJ45)
3. Alarm contact
4. Power input P2
5. Power input P1
6. Power input P1 LED
7. Power input P2 LED
8. Fault LED
9. Model Name: ED6008-SS-SC
10. Port 8: Single mode 100BaseFX
(SC connector)
11. Port 7: Single mode 100BaseFX
(SC connector)
12. Ports 1 to 6: 10/100BaseT(X)
13. 100/LNK/ACT LED
14. 10/LNK/ACT LED
15. DIN-Rail attachment plate
16. Spring for vertical DIN-Rail attachment
17. Plastic support for vertical DIN-Rail
attachment
18. Spring for horizontal DIN-Rail attachment
19. Plastic supports for horizontal DIN-Rail
attachment

2
2
2 Installing Moxa EtherDevice Server
This chapter includes information about installing Moxa
EtherDevice Server. The following topics are covered:
Mounting Dimensions
DIN-Rail Mounting
Wall Mounting

Mounting Dimensions
MOXA EtherDevice Server Hardware Installation Guide
2-2