Moxa Technologies TN-5305 Series Manual

2014 Moxa Inc. All rights reserved.
P/N: 1802053050011
TN-5305 Series
Hardware Installation Guide
M12 unmanaged Ethernet switches
Moxa ToughNet Switch
Second Edition, April 2014

- 2 -
Overview
The Moxa ToughNet TN-5305 series of 5-port Ethernet switches provides
a hardened and cost-effective solution for your Ethernet connections. The
TN-5305 switches are IP67-rated to provide protection against shock and
foreign particles. IP67-rated products have the following characteristics:
(1) dust proof, (2) protection against the effects of temporary immersion
in water.
The TN-5305 switches have a wide operating temperature range of -40
to75°C, and are designed to withstand a high degree of vibration and
shock. The rugged hardware design makes the TN-5305 switches perfect
for ensuring that your Ethernet equipment can withstand the rigors
associated with critical industrial applications. The switches are rated for
use in hazardous locations and comply with CE/FCC, UL and EN50155
(railway applications) standards.
Package Checklist
Your TN-5305 is shipped with the following items. If any of these items is
missing or damaged, please contact your customer service
representative for assistance.
•Moxa ToughNet Switch.
•Hardware Installation Guide.
•Product Warranty Statement.
•3 protective caps for unused ports and 8 port labels.
•Panel Mounting Kit.
Features
High Performance Network Switching Technology
•5 10/100BaseT(X) ports (4-pin shielded M12 socket with D coding).
•Broadcast storm protection.
•IEEE802.3/802.3u/802.3x.
•Store and Forward switching process type.
•10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing.
Industrial Grade Reliability
•Active circuit protection.
•Robust connection.
•Dust and immersion proof.
Rugged Design
•Casing design meets IP67 protection standards.
•M12 connectors for robust connections.
•Operating temperature range of -25 to 60°C, or extended operating
temperature range of -40 to 75°C.

- 3 -
TN-5305 Panel Layouts
Front Panel View
1. M12 port’s 10/100 Mbps LED.
2. 10/100BaseT(X) port (4-pin
female shielded M12 socket
with D coding).
3. Port Label.
4. Power input (5-pin male
shielded M12 socket with A
coding).
5. Power input (PWR) LED.
6. Model name.
7. Holes for attaching the
TN-
5305 to a wall with screws
(there are 3 holes:
bottom left,
bottom right, and top middle).
8. Grounding screws.
Mounting Dimensions (unit = mm)

- 4 -
Panel/Wall Mounting
To mount the TN-5305 on the wall use the 3 screws included in the panel
mounting kit.
STEP 1: Make 3 screw holes on the wall based on the positions of the 3
screw holes on the switch shown in the mounting dimensions diagram.
STEP 2: Insert one screw in the top-middle screw hole on the switch and
screw it into the wall.
STEP 3: Screw in the remaining 2 screws through the bottom-left and
bottom-right holes on the switch.
DIN-Rail Mounting (optional)
Use the optional DIN-Rail mounting kit (DK-M12-305, must be purchased
separately) to mount the TN-5305 on a 35-mm DIN rail.
STEP 1:
Fix the DIN-Rail attachment plate to the rear panel of the switch as shown
in the above figure.
STEP 2:
Position the top hook of the
DIN
-Rail attachment plate to the
top edge of the rail.
STEP 3:
Rotate the switch downwards until
the bottom of the attachment plate
latches onto the bottom edge of the
rail.
To remove the switch from the DIN-Rail, simply reverse Steps 2 and 3
above.

- 5 -
Wiring Requirements
WARNING
Turn the power off before
disconnecting modules or wires. The
correct power supply voltage is listed on the product label. Check
the voltage of your power source to make sure that you are using
the correct voltage. Do NOT use a voltage greater than what is
specified on the product label
.
These devices must be supplied by a SELV source as defined in
the Low Voltage Directive 2006/95/EC and 2004/108/EC.
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or
wiring your Moxa switch.
This device has UL508 approval.
Use copper conductors only,
60/75°C, Tighten To 4.5
pound-inches. For use in Pollution
Degree 2 Environment.
ATTENTION
Safety First!
Calculate the maximum possible current in each power wire
and
common wire. Observe all electrical codes dictating the
maximum current allowable for each wire size. If the current goes
above the maximum ratings, the wiring could overheat, causing
serious damage to your equipment.
You should also heed the following guidelines:
•Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
NOTE: Do not run signal or communications wiring and power
wiring in the same wire conduit. To avoid interference, wires
with different signal characteristics should be routed
separately.
•You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of thumb is
that wiring that shares similar electrical characteristics can be
bundled together.
•Keep input wiring and output wiring separated.
•It is strongly advised that you label wiring to all devices in the system
when necessary.

- 6 -
Grounding the TN-5305
Grounding and wire routing help
limit the effects of noise due to
electromagnetic interference (EMI).
Run the ground connection from the
ground screw to the grounding
surface prior to connecting devices.
ATTENTION
This product is intended to be mounted to a well
-grounded
mounting surface such as a metal panel.
10/100BaseT(X) Ethernet Port Connection
All TN-5305 models have 5 10/100BaseT(X) Ethernet ports (4-pin
shielded M12 socket with D coding). The 10/100TX ports located on the
TN-5305’s front panel are used to connect to Ethernet-enabled devices.
Most users configure these ports for Auto MDI/MDI-X mode, in which case
the port’s pinouts are adjusted automatically depending on the type of
Ethernet cable used (straight-through or cross-over), and the type of
device (NIC-type or HUB/Switch-type) connected to the port.
In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X
(HUB/Switch-type) ports. We also give cable wiring diagrams for
straight-through and cross-over Ethernet cables.
Pinouts for sockets on TN-5305
TP Port
Power input
Pin 1
Input V+
Pin 2
Not assigned
Pin 3
Input V-
Pin 4
Not assigned
Pin 5
Function ground

- 7 -
Pinouts for RJ45 (8-pin)
RJ45 (8-Pin)
MDI Port Pinouts
MDI-X Port Pinouts
Pin
Signal
1
Tx +
2
Tx -
3
Rx +
6
Rx -
Pin
Signal
1
Rx +
2
Rx -
3
Tx +
6
Tx -
M12 (4-pin, M) to M12 (4-pin, M) Cross-Over Cable Wiring
M12 (4-pin, M) to M12 (4-pin, M) Straight-Trough Cable Wiring
M12 (4-pin, M) to RJ45 (8-pin) Cross-Over Cable Wiring

- 8 -
M12 (4-pin, M) to RJ45 (8-pin) Straight-Trough Cable Wiring
Auto MDI/MDI-X Connection
The Auto MDI/MDI-X function allows users to connect TN-5305’s
10/100BaseTX ports to any kind of Ethernet device, without needing to
pay attention to the type of Ethernet cable being used for the connection.
This means that you can use either a straight-through cable or cross-over
cable to connect the TN-5305 to Ethernet devices.
LED Indicators
Several LED indicators are located on the TN-5305’s front panel. The
function of each LED is described in the table below.
LED
Color
State
Description
PWR AMBER
On
Power is being supplied to the power
input.
Off
Power is not being supplied to the
power input.
LNK/ACT
(10M) AMBER
On
TP port’s 10 Mbps link is active.
Blinking
Data is being transmitted at 10 Mbps
Off
TP port’s 10 Mbps link is inactive.
LNK/ACT
(100M) GREEN
On
TP port’s 100 Mbps link is active
Blinking
Data is being transmitted at 100 Mbps.
Off
TP port’s 100 Mbps link is inactive.
Auto-Negotiation and Speed Sensing
All of the TN-5305’s Ethernet ports independently support
auto-negotiation for speeds in the 10BaseT and 100BaseTX modes, with
operation according to the IEEE 802.3u standard. This means that some
nodes could be operating at 10 Mbps, while at the same time, other nodes
are operating at 100 Mbps.
Auto-negotiation takes place when an M12 cable connection is made, and
then each time a LINK is enabled. The TN-5305 advertises its capability
for using either 10 Mbps or 100 Mbps transmission speeds, with the
device at the other end of the cable expected to advertise in the same way.
Depending on what type of device is connected, this will result in
agreement to operate at a speed of either 10 Mbps or 100 Mbps.
If an TN-5305’s Ethernet port is connected to a non-negotiating device, it
will default to 10 Mbps speed and half-duplex mode, as required by the
IEEE 802.3u standard.

- 9 -
Specifications
Technology
Standards
IEEE 802.3, 802.3u, 802.3x
Processing Type
Store and Forward, with IEEE802.3x full duplex,
back pressure flow control
Interface
M12 Ports
10/100BaseTX auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection
LED Indicators
Power, LNK/ACT
Power
Input Voltage
24 VDC (12 to 45 VDC) or
18 to 30 VAC (47 to 63 Hz)
Input Current
0.1
2A @ 24 VDC
0.28A @ 24 VAC
Connection
M12 A-coding 5-pin male connector, single power
input
Protection
Overload current
protection / Limited
current
1.1A
Reverse polarity
protection
present
Mechanical
Casing
IP67 protection, plastic case
Dimensions
(W x H x D)
60 x 125 x 29.6 mm (2.4 x 4.9 x 1.2 in)
Weight
250g
Installation
Panel
mounting, DIN-Rail mounting (with
optional kit)
Environment
Operating Temperature
-25 to 60°C (-13 to 140°F) for standard model,
-40 to 75°C (-40 to 167°F) for -T models
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating relative
humidity
5 to 95% (non-condensing)
Regulatory Approvals
Safety
UL 508
Rail Traffic
EN 50155
Maritime
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000
-4-2 (ESD), level 3
EN61000
-4-3 (RS), level 3
EN6
1000-4-4 (EFT), level 3
EN61000
-4-5 (Surge), level 3
EN61000
-4-6 (CS), level 2
Shock: IEC60068
-2-27
Free Fall: IEC60068
-2-32
Vibration: IEC60068-2-6
Note: Please check Moxa’s website for the most up-to-date
certification status.
MTBF (meantime between failures)
Time
370,224 hrs
Database
Telcordia (Bellcore), GB 25°C
WARRANTY
5 years

- 10 -
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll
-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa China (Shanghai office):
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
:
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific:
Tel:
[phone]
Fax:
[phone]