Moxa Technologies TN-5516A Series Manual

2014 Moxa Inc. All rights reserved.
P/N: 1802055160021
TN-5516A/5518A Series
Hardware Installation Guide
Moxa ToughNet Switch
Second Edition, August 2014
www.ipc2u.ru
www.moxa.pro

- 2 -
Overview
The ToughNet TN-5516A/5518A series M12 managed Ethernet switches
are designed for industrial applications in harsh environments. The TN
series switches use M12 connectors to ensure tight, robust connections,
and guarantee reliable operation against environmental disturbances,
such as vibration and shock. The wide 24 to 110 VDC with dual power
input (non-PoE series) increases the reliability of your communications.
The TN-5516A series includes PoE and non-PoE switches.
• TN-5516A series: 16 Fast Ethernet M12 ports.
• TN-5516A-8PoE series:8 Fast Ethernet and 8 PoE Fast Ethenet M12
ports.
The TN-5518A series also includes PoE and non-PoE switches.
• TN-5518A series: 16 Fast Ethernet M12 ports, supports additional 2
Gigabit ports located on the bottom of the unit, with or without bypass
function.
• TN-5518A-8PoE series: 8 Fast Ethernet and 8 PoE Fast Ethenet M12
ports, supports additional 2 Gigabit ports located on the bottom of the
unit, with or without bypass function.
The -40 to 75°C operating temperature and IP54 rated waterproof
enclosure allow deployment in harsh environments. The
TN-5516A/5518A series Ethernet switches are compliant with EN
50155/50121-3-2/50121-4 (railway applications) requirements,
covering operating temperature, power input voltage, surge, ESD, and
vibration, making the switches suitable for a variety of industrial
applications
Package Checklist
Your ToughNet TN-5516A/5518A switch is shipped with the following
items. If any of these items are missing or damaged, please contact your
customer service representative for assistance.
•1 Moxa ToughNet switch
•M12 to DB9 console port cable
•2 protective caps for console and relay output ports
•Panel mounting kit
•CD-ROM with user’s manual, Windows utility, and SNMP MIB file
•Hardware installation guide
•Warranty card
Features
Anti-Vibration Circular Connectors for Robust Links
•M12 D-coding 4-pin female connectors for Fast Ethernet
10/100BaseT(X) ports
•M12 X-coded 8-pin female connectors for Gigabit Ethernet
10/100/1000BaseT(X) ports
•M12 A-coding 5-pin male connectors for console and relay output
•M23 6-pin male connectors for power input
Isolated Power Inputs
•Supports 24-110 VDC (16.8 to 137.5 VDC)
High Performance Network Switching Technology
•IPv6 ready, certified by the IPv6 Logo Committee
www.ipc2u.ru
www.moxa.pro

- 3 -
•IEEE 1588 PTP (Precision Time Protocol) for the precise time
synchronization of networks
•DHCP Option 82 for IP address assignment with different policies
•EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported
•Turbo Ring and Turbo Chain (recovery time <20 ms @250
switches),and STP/RSTP/MSTP for network redundancy
•IGMP Snooping and GMRP for filtering multicast traffic from industrial
Ethernet protocols
•Port-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease
network planning
•QoS (IEEE 802.1p/1Q and ToS/DiffServ) allows real-time traffic
classification and prioritization
•802.3ad, LACP for optimum bandwidth utilization
•TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance
network security
•SNMP v1/v2c/v3 for different levels of network management
•RMON for efficient network monitoring and proactive capability
•Bandwidth management prevents unpredictable network status
•Lock port allows access by only authorized MAC addresses
•Port mirroring for online debugging
•Automatic warning by exception through email, relay output
•Automatic recovery of connected devices’ IP addresses
•Line-swap fast recovery
•LLDP for automatic topology discovery through network management
software
•Loop protection prevents network loops
•Configurable through Web browser, Telnet/Serial console, CLI, and
Windows utility
Designed for Industry-Specific Applications
•Two Gigabit Ethernet ports to meet high bandwidth requirements.
•Bypass relay option on the 2 Gigabit Ethernet ports ensures non-stop
data communication in the event a switch stops working due to a
power failure.
•EN 50155/50121-3-2/50121-4 compliant
•-40 to 75°C operating temperature range
•IP54 rugged high-strength case
•Panel mounting or DIN rail mounting installation capability
Recommended Optional Accessories
•CBL-M23(FF6P)Open-BK-100-IP67: 1-meter M23 to 6-pin power
cable with IP67-rated female 6-pin M23 connector
•CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP
Ethernet cable with IP67-rated male 4-pin M12 D-coded connector
•CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable
with IP67-rated female 5-pin M12 A-coded connector
•M12D-4P-IP68: Field-installable M12 D-coded screw-type connector,
male 4-pin, IP68-rated
•M12A-5P-IP68: Field-installable M12 A-coded screw-type connector,
female 5-pin, IP68-rated
•CAP-M12F-M: Metal cap for M12 female connector
•DK-DC50131: DIN rail mounting kit, 50 x 131 mm
www.ipc2u.ru
www.moxa.pro

- 4 -
TN-5516A/5518A Panel Layouts
1. Model name
2. Screw holes for
panel mounting kit
3. Console port
4. Grounding screw
5. Relay output port
6. Power input voltage
range indicator
7. Power input port
(male 5-
pin shielded
M23 connector)
8. PWR1 LED: for
power input 1
9. PWR2 LED: for
power input 2
10.
FAULT LED
11.
MSTR/HEAD LED: for
ring master or chain
head
12.
CPLR/TAIL LED: for
ring coupler or chain
tail
13.
TP port’s 10/100
Mbps LED
14.
10/100BaseT(X)
port (M12 D-coded
4-pin female
connector)
15.
Waterproof vent
16.
Product label
17.
12 screw holes for
DIN rail mounting kit
18. E2 LED: Not used by the TN-5516A series
19.
E1 LED: Not used by the TN-5516A series
20.
Gigabit Ethernet port E1 (corresponds to port 17 in the TN-5518A
User’s Manual)
21.
Gigabit Ethernet port E2 (corresponds to port 18 in the TN-5518A
User’s Manual)
www.ipc2u.ru
www.moxa.pro

- 5 -
TN-5516A-8PoE/5518A-PoE Panel Layouts
1. Model name
2. Screw holes for
panel mounting kit
3. Console port
4. Grounding screw
5. Relay output port
6. Power input voltage
range indicator
7. Power input port
(male 5-
pin shielded
M23 connector)
8. PWR1 LED: for
power input 1
9. PWR2 LED: for
power input 2
10.
FAULT LED
11.
MSTR/HEAD LED: for
ring master or chain
head
12.
CPLR/TAIL LED: for
ring coupler or chain
tail
13.
TP port’s 10/100
Mbps LED
14.
10/100BaseT(X)
port (M12 D-coded
4-pin female
connector)
15.
Waterproof vent
16.
Product label
17.
12 screw holes for
DIN r
ail mounting kit
18.
E2 LED: Down-side
E2 Gigabit port's
10/100/1000 Mbps
LED
19.
E1 LED: Down-side E1 Gigabit port's 10/100/1000 Mbps LED
20.
Gigabit Ethernet port E1 (corresponding to port 17 in the TN-5518
A
User’s Manual)
21.
Gigabit Ethernet port E2 (corresponding to port 18 in the TN-5518
A
User’s Manual)
ATTENTION
DO NOT open or remove the vent (#15). Once the seal has been
removed, the warranty
becomes invalid.
Exposed connectors (including 3, 5, and 14) when not in use
must be tightly covered with protective caps (an optional
accessory) to ensure IP54-rated protection.
www.ipc2u.ru
www.moxa.pro

- 6 -
Mounting Dimensions (unit = mm)
TN-5516A Series
www.ipc2u.ru
www.moxa.pro

- 7 -
TN-5516A-8PoE Series
www.ipc2u.ru
www.moxa.pro

- 8 -
TN-5518A Series
www.ipc2u.ru
www.moxa.pro

- 9 -
TN-5518A-8PoE
Panel/Wall Mounting
STEP 1:
Mounting the TN-5516A/5518A to a wall requires 4 screws. Use the
ToughNet switch as a guide to mark the correct positions of the 4 screws.
STEP 2:
U
se the 4 screws in the panel mounting kit. If you
would like to use your own screws, make sure the
screw head
is between 6.0 mm and 7.0 mm in
diameter and the shaft
is less than 4.0 mm in
diameter, as shown at the right.
Do not screw the screws in all the way—leave a space of about 2 mm to
allow room for sliding the ToughNet switch between the wall and the
screws.
NOTE
Before tightening the screws into the wall, make sure the screw
head and shaft size are suitable by inserting the screw through
one of the keyhole-shaped apertures of the ToughNet switch.
www.ipc2u.ru
www.moxa.pro

- 10 -
STEP 3:
Once the screws are fixed in the wall, hang the ToughNet switch on the 4
screws through the large opening of the keyhole-shaped apertures, and
then slide the switch downwards. Tighten the four screws for added
stability.
NOTE
To provide greater protection from vibration and shock, use
screws with shaft diameter between 6.0 mm and 7.0 mm, and fix
the ToughNet switch onto the wall directly through the large
opening of the keyhole-shaped apertures.
DIN Rail Mounting (optional)
You can use the optional DIN rail
mounting kit DK
-DC50131 (must
be purchased
separately) to
mount
the
TN-5516A/5518A on a 35 mm
DIN
rail.
STEP 1:
Use 12 screws (6 screws per plate)
to attach the two DIN
rail
attachment plates to the rear panel
of the switch.
STEP 2:
If the spring-loaded bracket is locked in place, push the recessed button
to release it. Once released, you should feel some resistance from the
spring as you slide the bracket up and down a few millimeters in each
direction.
STEP 3:
Position the ToughNet switch on
the
DIN
rail, tilting to hook clamps over
the top edge of the rail.
STEP 4:
Swing the switch down fully onto
the DIN
rail until both clamps
completely latch.
www.ipc2u.ru
www.moxa.pro

- 11 -
To remove the Moxa ToughNet Switch from the DIN rail use a screwdriver
to pull out the two spring-loaded brackets from the bottom until they are
fixed in the “locked” position. Then reverse Steps 3 and 4 above.
Wiring Requirements
WARNING
Turn the power off before disconnecting modules or wires. The
correct power supply voltage is listed on the product
label. Check
the voltage of your power source to make sure you are using the
correct voltage. Do NOT use a voltage greater than what is
specified on the product label.
These devices must be supplied by a SELV source as defined in
the Low Voltage Directive 2006/95/EC and 2004/108/EC.
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or
wiring your Moxa switch.
This device has UL508 approval. Use copper conductors only,
75°C, and tighten to
4.5 pound-inches. For use in pollution
degree 2 environments.
ATTENTION
Safety First!
Observe all electrical codes dictating the
maximum current
allowable for each wire size. If the current
goes above the
maximum ratings,
the wiring could overheat, causing serious
damage to your equipment.
www.ipc2u.ru
www.moxa.pro

- 12 -
Please read and follow these guidelines:
•Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
NOTE: Do not run signal or communications wiring and power wiring
through the same wire conduit. To avoid interference, wires with
different signal characteristics should be routed separately.
•You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of thumb is
that wiring that shares similar electrical characteristics can be
bundled together.
•Keep input wiring and output wiring separated.
•It is strongly advised that you label wiring for all devices in the system
when necessary.
Grounding the ToughNet Switch
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
grounding screw to the grounding surface prior to connecting devices.
ATTENTION
This product is intended to be mounted to a well
-grounded
mounting surface such as a metal panel.
Connecting the Power Supplies
In non-PoE switches, the ToughNet TN-5516A/5518A series switches
support two sets of power input—power input 1 and power input 2. The
M23 6-pin male connector on the TN-5516A/5518A non-PoE switches’
front panel is used for the dual power inputs.
www.ipc2u.ru
www.moxa.pro

- 13 -
Pinouts for the power input port on the TN-5516A/5518A
(non-PoE series)
Pinouts for the power input port on the TN-5516A/5518A-PoE
series
Pin
Description
Usage
1 PWR1 Live / DC +
Connect “PWR1 Live / DC +” to the
positive (+) terminal when using a DC
power source.
2 PWR1 Neutral / DC -
Connect “PWR1 Neutral / DC –” to the
negative (-) terminal when using a DC
power source.
3 Chassis Ground
Connect the “Chassis Ground” to the
equipment ground bus for DC inputs.
4 PWR2 Neutral / DC -
Connect “PWR2 Neutral / DC –” to the
negative (-) terminal when using a DC
power source.
5 PWR2 Live / DC +
Connect “PWR2 Live / DC +” to the
positive (+) terminal when using a DC
power source.
STEP 1:
Plug your power cord connector into the power input port of the
TN-5516A/5518A switch.
STEP 2:
Screw the nut on your power cord connector into the power input
connector on the switch to ensure a tight connection.
ATTENTION
Before connecting the
TN-5516A/5518A to the power input,
make sure the power source voltage is stable.
ATTENTION
Do not power on
the TN-5516/5518A before connecting the
M23
connector.
www.ipc2u.ru
www.moxa.pro

- 14 -
Connecting the Relay Outputs
Each TN-5516A/5518A switch has two sets of relay outputs—relay output
1 and relay output 2. The M12 A-coded 5-pin male connector on the
TN-5516A/5518A’s front panel is used for the two relay outputs. Use a
power cord with an M12 A-coded 5-pin female connector to connect the
relay contacts. You can purchase an M12 power cable from Moxa; the
model number is CBL-M12 (FF5P)/OPEN-100 IP67.
Pinouts for the relay output port on the TN-5516A/5518A
N.C.: Not connected
FAULT:
The two sets of relay contacts of the M12 A-coded 5-pin male connector
are used to detect user-configured events. The two wires attached to the
fault contacts form an open circuit when a user-configured event is
triggered. If a user-configured event does not occur, the fault circuit
remains closed.
Connecting the Data Lines
10/100BaseT(X) Ethernet Port Connection
All TN-5516A/5518A models have 16 10/100BaseT(X) Ethernet ports
(M12 D-coded 4-pin female connector). The 10/100TX ports located on
the TN-5516A/5518A front panel are used to connect to Ethernet-enabled
devices. Most users configure these ports for Auto MDI/MDI-X mode, in
which case the port’s pinouts are adjusted automatically depending on
the type of Ethernet cable used (straight-through or cross-over), and the
type of device (NIC-type or HUB/Switch-type) connected to the port.
In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X
(HUB/Switch-type) ports. We also give cable wiring diagrams for
straight-through and cross-over Ethernet cables.
Pinouts for the 10/100BaseT(X) Ports on the TN-5516A/5518A
Housing: shield
www.ipc2u.ru
www.moxa.pro

- 15 -
Pinouts for the 10/100/1000BaseT(X) M12 (8-pin) Port
M12 (4-pin, M) to M12 (4-pin, M) Cross-Over Cable Wiring
M12 (4-pin, M) to M12 (4-pin, M) Straight-Trough Cable Wiring
M12 (4-pin, M) to RJ45 (8-pin) Cross-Over Cable Wiring
www.ipc2u.ru
www.moxa.pro

- 16 -
M12 (4-pin, M) to RJ45 (8-pin) Straight-Trough Cable Wiring
ATTENTION
The protective cover must be fixed properly to ensure IP54
protection. Use a torque wrench set to a torque of 4 kgf
-
m when
tightening the screws. Note that applying a larger torque
may
damage the plastic protective cover.
Bypass Relay Function
The 2 Gigabit Ethernet ports on the TN-5518A-2GTXBP and
TN-5518A-8PoE-2GTXBP are equipped with a bypass relay function.
When the switch is operating normally, these two Gigabit ports work in
the same way as the other ports. That is, frame ingressions are processed
and then forwarded. In the event the switch stops working due to a power
failure, the bypass relay function will be triggered to ensure non-stop data
communication.
The figure below illustrates the bypass relay function. For example, if
Switch B loses power, then the two Gigabit ports will be bypassed through
the relay circuit and the transmission line from Switch A to B and the
transmission line from Switch B to C will interconnect automatically;
when done this way, there will be no stoppage.
The bypass relay function helps the network recover from single-node
failures in a linear topology.
Since the maximum segment length of category 5 twisted-pair cable is
100 meters, cable length must be considered when designing a network
that utilizes this function. For example, the total length of the cables from
Switch A to B and from B to C must be no more than 100 meters. This way,
if the two adjacent nodes (switch B and C for example) encounter a power
failure, there will be no stoppage, provided that the total length of the
cables A-to-B, B-to-C, and C-to-D are no more than 100 meters.
The bypass relay function works best for networks with linear topologies.
ToughNet™ switches with bypass relay function are not recommended to
be used in networks that employ ring topologies because network loops
Bypassing
Switch A
Switch B
Switch C
Switch D
www.ipc2u.ru
www.moxa.pro

- 17 -
may occur when redundancy protocols such as RSTP or TurboRing™ are
applied.
LED Indicators
Several LED indicators are located on the ToughNet switch’s front panel.
The function of each LED is described in the table below.
LED
Color
State
Description
System LEDs
PWR1 AMBER
ON
Power is being supplied to power input
PWR1.
OFF
Power is not being supplied to power input
PWR1
PWR2 AMBER
ON
Power is being supplied to power input
PWR2.
OFF
Power is not being supplied to power input
PWR2.
FAULT RED
ON
When the corresponding PORT alarm is
enabled, and a user-configured event is
triggered.
OFF
When the corresponding PORT alarm is
enabled and a user-configured event is not
triggered, or when the corresponding PORT
alarm is disabled.
MSTR/
HEAD GREEN
ON
When the TN switch is either the Master of
this Turbo Ring, or the Head of this Turbo
Chain.
Blinking
When the TN switch is Ring Master of this
Turbo Ring and the Turbo Ring is broken, or
it is Chain Head of this Turbo Chain and the
Turbo Chain is broken.
OFF
When the TN switch is neither the Master of
this Turbo Ring, nor the Head of this Turbo
Chain.
CPLR/
TAIL GREEN
ON
When the TN switch enables the coupling
function to form a back-
up path in this Turbo
Ring, or it is the Tail of this Turbo Chain.
Blinking
When Turbo Chain is down.
OFF
When the TN switch disables the coupling
function of Turbo Ring, or it is not the Tail of
the Turbo Chain.
Port LEDs
TP
(10/
100M)
AMBER
ON
TP port’s 10 Mbps link is active.
Blinking
Data is being transmitted at 10 Mbps.
Off
TP port’s 10 Mbps link is inactive.
GREEN
On
TP port’s 100 Mbps link is active.
Blinking
Data is being transmitted at 100 Mbps.
off
TP port’s 100 Mbps link is inactive.
E1/E2
(10/
100/
1000M)
AMBER
On
TP port’s 10 or 100 Mbps link is active.
Blinking
Data is being transmitted at 10 or 100 Mbps.
Off
TP port’s 10 or 100 Mbps link is inactive.
GREEN
On
TP port’s 1000 Mbps link is active.
Blinking
Data is being transmitted at 1000 Mbps.
Off
TP port’s 1000 Mbps link is inactive.
www.ipc2u.ru
www.moxa.pro

- 18 -
Specifications
Technology
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X) (TN-5518A
series
only)
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMP v1/v2 device, GMRP, GVRP, SNMP
v1/v2C/v3, DHCP Server/Client, DHCP Option
66/67/82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, HTTPS, Telent, SSH, Syslog, LLDP,
IEEE 1588 PTP v2, IPv6, NTP Server/Client,
EtherNet/IP, Modbus/TCP
MIB
MIB-II, Ethernet-like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB,
RMON MIB
Group 1, 2, 3, 9
Flow Control IEEE802.3x flow control, back pressure flow
control
Switch Properties
Priority Queues
4
Max. Number of
Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
Interface
Fast Ethernet Front cabling, M12 D-coded 4-pin female
connector, 10/100BaseT(X) auto negotiation
speed, F/H duplex mode, and auto MDI/MDI-X
connection
Gigabit Ethernet
Down cabling, M12 X-coded 8-pin female
connector, 10/100/1000BaseT(X) auto
negotiation speed, F/H duplex mode, auto
MDI/MDI-X connection, and bypass relay option
Console Port
M12 A-coding 5-pin male connector
System LED
Indicators
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Port LED Indicators
10/100M (Fast Ethernet port), 10/100/1000M
(Gigabit Ethernet port)
Alarm Contact
Two relay outputs in one M12 A-coding 5-pin male
connector with current carrying capacity of 1
A @
30 VDC
www.ipc2u.ru
www.moxa.pro

- 19 -
Power Requirements
Input Voltage
WV: 24-110 VDC (16.8 to 137.5 VDC)
Max. Input Current TN-5516A Series: 0.39 A
TN-5518A-2GTX Series: 0.57 A
TN-5518A-2GTXBP Series: 0.68 A
TN-5516A-8PoE Series: 8.37 A
TN-5518A-8PoE Series: 8.52 A
TN-5518A-8PoE-2GTXBP Series: 8.66 A
Connection
M23 6-pin male connector
Overload Current
Protection
Present
Reverse Polarity
Protection
Present
Physical Characteristics
Housing
Metal, IP54 protection (with protective caps on
unused ports)
Dimensions
(W ×H ×D)
TN-5516A Series:
250 x 175.8 x 76 mm (9.84 x 6.92 x 2.99 in)
TN-5516A-8PoE Series:
250 x 175.8 x 115 mm (9.84 x 6.92 x 4.53 in)
TN-5518A Series:
250 x 180.9 x 76.0 mm (9.84 x 7.12 x 2.99 in)
TN-5518A-8PoE Series:
250 x 180.9 x 115 mm (9.84 x 7.12 x 4.53 in)
Weight
TN-5516A Series: 2138 g
TN-5518A Series: 2250 g
TN-5516A-8PoE Series: 3286 g
TN-5518A-8PoE Series: 3439 g
Installation
Panel mounting, DIN rail mounting
(with optional kit)
Environmental Limits
Operating
Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Humidity
5 to 95% (non-condensing)
Regulatory Approvals
Safety
UL508
Rail Traffic
EN50155, EN50121-3-2, EN50121-4
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), exceeds level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
Shock
IEC61373
Freefall
IEC60068-2-32
Vibration
IEC61373
Note: Please check Moxa’s website for the most up-to-date
certification status.
WARRANTY
5 years
Details: See www.moxa.com/warranty
www.ipc2u.ru
www.moxa.pro

- 20 -
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll
-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa China (Shanghai office):
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
:
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific:
Tel:
[phone]
Fax:
[phone]
www.ipc2u.ru
www.moxa.pro