Mpio DME User manual

2
Digital Sound MP3 Player
What is MP3?
MP3 stands for MPEG 1/2 layer 3.
MP3 files can be compressed up to 1/20 size of
the original wave files.
What is the MPIO?
The MPIO stands for Multi-Play Internet AudiO,
is a new generation digital audio player.
You can purchase MP3 files on the internet
and download them directly to your MPIO for
CD quality sound without the need of casette
tapes or CDs.
Up to 30 Hrs Play
with Remote
Control and USB
Connection!
Digital Sound
The MPIO maintains high
quality sound at all time.

3
• This equipment has been tested and found to comply with the
limits for a Class B digital device.
Player Features and Controls..
Accessories
Inserting the battery
Display(LCD) panel
Listening to the sample music
Adjusting Vol(Volume) / Hold mode
REP(Repeat) mode
EQ(Equalizer) mode
A󱈗B(Repeat Segmentation) mode
Installing Software on PC
Installing The MPIO-DME Manager
Connecting the MPIO to PC
Formatting Internal Memory
Downloading Files to the MPIO
Erasing Files on PC
Arranging the Playback Order
Inserting the SMC(SmartMedia Card)
Safety Precautions
Troubleshooting
Technical Specifications
Warranty
4
6
7
8
9
10
11
13
14
15
16
17
18
19
21
22
24
25
26
27
28
CONTENTS

4
PLAYER FEATURES AND CONTROLS
USB Connector
Power on/Play/Pause
LCD
Earphone Jack
Hold Switch Volume Control
Rewind/ Fast Rewind
Forward/ Fast Forward
Stop/Power off
A󱈗B (Seek)
EQ(Equalizer) (Rock/Flat/Classic/Bass/Pop)
Repeat (Intro/Normal/Repeat1/Repeat All/Shuffle)
Front Panel

5
Battery Case
SMC Slot
Eject Button
(SmartMedia Card) Power on/Play/Pause
Stop/Power off
Volume Control [+/-]
EQ(Equalizer)
(Rock/Flat/Classic/Bass/Pop)
Earphone Jack
Rewind
Forward
Hold
Hole for Wrist
String
Rear Panel Optional Remote Control

6
ACCESSORIES
USB CableUser's Guide Installation CD
Remote Control 1.5V AA type Battery
(1EA)
Wrist String
Earphone

7
INSERTING THE BATTERY
1. Slide the battery cover in the
direction of the arrow. 2. Insert "AA" type battery with the correct polarity. 3. Close the cover and slide it as indicated until the battery cover
latches.
• You need one 1.5V AA type battery for your MPIO.

8
DISPLAY(LCD) PANEL
The indicator shows the amount of battery
remaining as belows:
If the battery icon shows empty and starts
blinking, it indicates the battery is almost gone.
(About 3 minutes left before the battery needs to
be replaced.)
EQ(Equalizer Mode) Icon:
By selecting Equalizer menu, you
can choose one mode from 5
different Equalizer
modes(Rock/Flat/Classic/Bass/Pop)
as you like.
Playback Icon
Track Number
Battery Icon
Playing Time of music files
SMC(SmartMedia Card) Icon
Repeat Mode Icon
Hold Icon
Battery

9
LISTENING TO THE SAMPLE MUSIC
If you do not press any buttons during in
the selection state, MPIO will
automatically turn off after 3 minutes.
Your MPIO comes with pre-installed MP3 files for your immediate use.
2. (REWIND button)
Press the button shortly to select the
previous files.
Press and hold the button to rewind fast.
(FORWARD button)
Press the button shortly to select the
next files.
Press and hold the button to go forward
fast.
3. To stop the MPIO temporarily, Press
(play button).
Press (play button) again to
continue playing.
1. Turn the MPIO on by
pressing and holding
(play button) for about
2 seconds.
Press (play button)
again to play the first
selection.
4. Press to stop
playing.
To turn your MPIO off,
press and hold
button for about 3
seconds.

10
ADJUSTING VOL(VOLUME LEVEL)/ HOLD MODE
1. Turn the MPIO on and
select the file what you
desire.
2. Adjusting the volume
Adjust the volume by
pressing the volume
control ( ) to your
desired level.
• The level of volume is 00-40.
Hold Button
For the prevention of malfunction of player, locate the
Hold switch to the Hold position. When this button is kept
on, all buttons will not operate. And icon will be displayed
on the LCD. ( )

11
REP(REPEAT) MODE
1. Press Repeat mode, and you can select 5 different functions mode as below.
Repeat mode
Intro : Plays first 10 seconds for each of the file
Normal : Plays all stored files one time in order
Repeat 1 : Repeats the current selected file
Repeat All : Repeats all stored files
Shuffle : Plays files in random order
ICON

12
REP MODE
• Press and select REP Mode, and you can enjoy following modes Intro →Normal →Repeat One →Repeat
All →Shuffle.
Intro Normal Repeat One Repeat All Shuffle

13
EQ(EQUALIZER) MODE
To adjust the desired equalizer mode, press EQ button. You can enjoy 5 different modes as
below:
Rock : Balance suitable for rock music
Flat : Normal balance
Classic : Balance suitable for classical music
Bass : Balance suitable for strengthen bass
Pop : Balance suitable for pop music
Your MPIO is equipped with a preset equalizer that enables you to choose the most appropriate balance between treble and bass
frequencies, according to the type of music you are listening to.
Equalizer modeICON

14
A󱈗󱈗B(REPEAT SEGMENTATION) MODE
If you press the (Rewind & Forward button) during
playback time, you can move to the previous point or the next
in a current track.
If you press (Forward) button
1. Press button
during playback. 2. Press button once again to complete the
Repeat Segmentation.
3. Press (Stop) button to cancel the
Repeat Segmentation mode.
①To cancle the Repeat Segmentation and
play the current file, press button.
②To go back to the initial state of the file,
press (Stop) button.
Then the icon will appear on
LCD. It indicates the mode is
starting.
The icon will appear on LCD.
It indicates the mode is selected .

15
INSTALLING SOFTWARE ON PC
First, place the Installation CD into our CD-ROM drive. The
installation will start with the initial page as ou can see on the right
side of this page.
• MPIO-DME Manager
MPIO-DME Manager is for transferring files between PC and the MPIO.
You can download MP3 files and others to your MPIO.
You can also upload any other files (except MP3 and WMA files) to your PC
using this software.
• Sample MP3 Songs
You can enjoy 5 sample songs in MP3.
• WWW
You can get updated information and MPIO-DME Manager from our
website.
S stem Requirements
• Pentium 133MHz or faster • CD-ROM drive • USB port
• 20MB free hard disk space • Windows 98/SE/ME/2000(PRO)/MAC OS(ver8.61~9.1)
Insert the Installation CD into the CD-ROM drive. The picture below will appear.

16
INSTALLING THE MPIO-DME MANAGER
By pressing the 'Next' button you can install the MPIO-DME Manager in order.
• The installation of MPIO -DME Manager was finished well.
'MPIO-DME Manager' icon will be created on your Windows desktop.
Click! Click!
Click!

17
CONNECTING THE MPIO TO PC
1. Connect the USB Cable to the
USB port of the computer.
Attention
Please connect the USB Cable to your MPIO only when your MPIO is in the stop mode.
If you connect the USB Cable to your MPIO in the playing mode of your MPIO, the set can become wrong.
‘Con PC’will appear on the
LCD of the player.
Before you download MP3 files into the MPIO, you must connect the MPIO to
your PC using the supplied USB cable.
2. Only with your USB cable can upload or download the files,
even with no battery.

18
FORMATTING INTERNAL MEMORY
1. Execute the MPIO-DME Manager. 2. Click [Memory] and select [Format
Internal Memory].
• Before formatting the SMC(SmartMedia Card),
connect your MPIO to PC. If the SMC is
installed in the MPIO, you can also format SMC
by selecting [Memory] and [Format Memory
Card].
• Double-click the icon of the MPIO-DME Manager on
the desktop.
Before formatting internal memory, turn the MPIO on and connect the MPIO to PC using the USB cable.
Double-Click!

19
DOWNLOADING FILES TO THE MPIO
Before downloading files to your MPIO, turn the MPIO on and connect the MPIO to PC using the USB cable.
1. Execute the MPIO-DME Manager.
Double-click the icon of the MPIO-
DME Manager on the desktop.
2. Click Connect icon on the
MPIO-DME Manager. 3. Select File(s) to download to the
MPIO.
Double-Click!

20
• You can also select [File] and [Download Files to MPIO].
4. Click Download icon. Note
■Always check that 'Con PC' is
displayed on the LCD of the MPIO
before sending files.
The selected file has been downloaded.
Now you can listen to music with the MPIO
after removing the USB cable.

21
ERASING FILES ON PC
Turn the MPIO on and connect your MPIO to PC and execute the MPIO-DME Manager before
erasing.
1. Click the file of the MPIO you would
like to delete. 2. Click [File] and select [Erase Files in MPIO]. 3. Click [OK].
You can also delete the file by pressing the right button on the mouse and selecting Erase.