Mr. beams Mb10025 User manual

USER MANUAL

Customer Support

Mailing Address

Mr Beams U.S.

600 Beta Drive, Unit 100

Mayfield Village, OH 44143

www.mrbeams.com

9 a.m. - 5 p.m. EST

(877) 298-9082

customerser[email protected]

INSTALLATION

MB10025

NOSTALGIC INCANDESCENT

STRING LIGHTS, ST58

3. Screw the bulbs into the

sockets along the cord.*

4. Plug the cord into an outlet

to power the lights.

1. Identify the desired location

within reach of an outlet to

mount the lights. We recommend hanging the string

before connecting the bulbs to avoid

any possible damage to the bulbs

during the mounting process.

2. Hang the lights by the

mounting clip on each

socket.

48 40 ST58 IP65 -13º- 140º FE26 Yes

Cord Lengths

Available (ft.) Bulb Wattage Bulb Type Dimmable IP Rating Operating

Temperature

Bulb Base

1 YEAR WARRANTY AGAINST DEFECTS

All Mr Beams products are guaranteed against defects in workmanship and

materials for 1 year from purchase. Warranties implied by law are subject to the

same time period limitation. Some states do not allow limitations on how long an

implied warranty lasts, so this time limitation may not apply to you. If the product

fails due to a manufacturing defect during normal use, return the product and dated

sales receipt to the store where purchased for replacement OR send the product

and the dated sales receipt to Mr Beams' mailing address. Not covered – Bulbs are

not covered by this warranty. Repair service, adjustment and calibration due to

misuse, abuse or negligence are not covered by this warranty. Unauthorized service

or modiﬁcation to this product or of any furnished components will void this

warranty in its entirety. This warranty does not include reimbursement for

inconvenience, installation, setup time, loss of use, postage, unauthorized service,

or other products used in conjunction with, but are not supplied by, Wireless

Environment. This warranty gives you speciﬁc legal rights, and you may also have

other rights which vary from state to state.

mrbeams.com/register

TIPS

Lights should be supported at sockets using suspension cable kit (not

included) if no structure is available. Mount the lights with the bulbs facing

down and do not cluster the bulbs. Lights should have with a minimum of 3

inches from the nearest object.

WARNINGS

Keep away from combustible materials and do not allow the bulbs or sockets

to come into contact with walls, ceilings, fabrics, etc. Not intended for

installation in ceilings, enclosed spaces or aquariums. Do not overload any

socket or string maximum wattage rating.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

These products are suitable for outdoor use only. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact aDo not mount or place near gas or electric

heaters, ﬁreplaces, candles or other similar sources of heat.

Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Install only using the mounting means provided.

Do not let lamps rest on the supply cord or on any wire.

Do not use this product for other than its intended use.

Do not hang objects from cord, wire, or light string.

Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

Do not cover the product with cloth, paper or any material not part of the product when in use.

This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt,

contact a qualiﬁed electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug. It is acceptable to omit this item if the product does not employ a polarized plug.

This product employs overload protection (fuse). A blown fuse indicates an overload or shortcircuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product.

Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded. It is acceptable to omit