MRHANDSFREE Handsfree Kit User manual

M_Genius_GB_2.pmd 21.03.2005, 11:53
10

TABLE OF CONTENTS
WHAT DOES MR HANDSFREE GENIUS INCLUDE?..........2
INSTALLATION.........................................................................2
OPERATION OF MR HANDSFREE GENIUS............................6
TROUBLE-SHOOTING ............................................................7
MAINTENANCE........................................................................9
M_Genius_GB_2.pmd 21.03.2005, 11:531

2English
3
Dear mr Handsfree Genius owner,
Congratulations on your purchase of one of the most sophisticated and
easy to use car kits! This model provides you with the highest quality full-
duplex voice communication. Now you can enjoy the safest telephone
conversations in your car without any inconveniences.
WHAT DOES MR HANDSFREE GENIUS INCLUDE?
1. Main Unit with built-in speaker.
2. TALK mode LED indicators.
3. Buttons for releasing the Main Unit from the Main unit holder.
4. Holder for Mobile phone.
5. Button to release the cramps of the Holder.
6. Main unit holder.
7. Microphone jack.
8. Power adapter for cigarette plug:
8.1. Curled cord.
8.2. Removable fuse.
9. LED indicator of PowerAdapter.
10. Mountingbracket.
11. Long screws (15mm) for fastening the Mounting Unit to the dashboard of
yourcar.
12. Microphone.
13. Button for microphone sensitivity.
14. Clips for guiding the microphone cord.
15. Adapterfor connection to car power supply and Mutecord of Car Radio (CRM).
16. Contact clips for connecting the cords.
17. Connector for connecting Mobile Phone to the Main Unit (not included).
18. Screwdriver.
INSTALLATION
MOUNTING MR HANDSFREE GENIUS
• Select the place where you want to install the Genius main unit. The place
for the main unit has to be easily accessible for your hands, clearly visible
for the phone’s display and safe enough in case of accidents and for the
operation ofAirbags. Under no circumstances should the appliance prevent
the driver from controlling or operating the car in any way.
• The mounting for the Genius main unit (this is also the phone holder) has to
be done by using a mounting bracket. The Genius main unit has to be
removed from the main unit holder. This holder is already screwed to the
universal mounting bracket.
2
M_Genius_GB_2.pmd 21.03.2005, 11:532

3
English
INSTALLATION
Mounting the Genius main unit holder
The Genius main unit can be mounted in two ways:
A. You can mount the universal mounting bracket with the supplied screws, or:
B. • Remove the universal mounting bracket from the main unit holder
by unscrewing the 6 screws.
• Screw the main unit holder to the dashboard or a bracket that is
designed for your type of car.
How to fix the universal mounting bracket?
In most cars, the universal mounting bracket is placed on the right side of the
gear-control console. Make sure that the mounting bracket does not block any
airbags!
1. Checkfor a location in yourcar (close to the gear-control console) wherethe
mounting bracket fits and where it is comfortable for use.
2. Make sure that the location in your car where you want to install your mr
Handsfree Genius is free from dust and dirt. Remove the cover of the
adhesive tape on the mounting bracket.
3. Put the upper part of the mounting bracket , with the adhesive tape, over the
edge of the console. Put the lower part of the mounting bracket , with the
angle, under the edge of the console.
4. Press both parts of the mounting bracket together until the face of the upper
part is in a horizontal position. Insert the screw in the appropriate hole.
Tighten the screw. Place the enclosed cap over the nut.
5. You have now successfully installed the universal mounting bracket.
3
2
M_Genius_GB_2.pmd 21.03.2005, 11:53
3