MshOt MZX81 User manual

MZX81
(MZX-BG-LED)
Stereo Fluorescence Microscope
User manual

- 1 -
Content
Advantages..........................................................................................................................2
Ⅰ. Specification..................................................................................................................3
Ⅱ. Construction..................................................................................................................4
Ⅲ. Installation....................................................................................................................5
Ⅳ. Operation......................................................................................................................6
Fluorescence observation...................................................................................................6
Bright field observation......................................................................................................6
Ⅴ.Maintenance...................................................................................................................7

- 2 -
MZX81 fluorescence stereo microscope using Galilean optical system, LED double epi-illumination light
path design, matching Blue and Green color LED excitation light source, to achieve high-resolution and
high-quality fluorescence imaging.
Advantages：
Standard blue and green excitation groups to satisfy most scientific research requirement, accept to
customize wavelength.
Match with LED cold light source,energy conversation and environment protection, long life, no
need of preheat and easy operation.
Easy to mount with microscopes.

- 3 -
Ⅰ. Specification
Optical system
Galilean optical system
LED epi-fluorescence
illumination
3W LED
Blue LED wavelength 470-475nm
Blue filter set:EF 460-490nm/DM 500nm/BF 520nm；
Green LED wavelength 520-530nm
Green filter set：EF 510-550nm/DM 570nm/BF 590nm

- 4 -
Observation tube
SZX-TR30 lead-free observation head
Trinocular, 30° inclination light path mode: eyepiece 100%，photography
80%, eyepiece 20%

- 5 -
Eyepiece
SWF 10X ,F.N. 20
Zoom system
Zoom radio: 7:1（0.8×~5.6×）
Screw fixed objective mode
Objective
1X，N.A. 0.10，WD. 81mm
Basement
SZ2-ST standard base，with fluorescence plate M-FL
Transmitted fluorescence accessories SZ2-ILA、H-150（optional）
Working surroundings
Room temperature：5°C to 40°C（41°F to 104°F）,Maximum relative
humidity is 80％，temperature is 31°C
Ⅱ. Constructions

- 6 -
2.C-mount interface
1.Eyepiece
3.observation shift lever
4. Set screw
5. Filter set turret
6.Brightness adjustment
knob （Left side）
7. DC power adapter
seat （Back side）
9. Light source transfer
lever
8. Set screw
10. Zoom rotary knob
11. Manual crew
12. Focusing
system
13. Power adapter

- 7 -
Ⅲ、Installation
Trinocular head
MZX-BG-LED
fluorescence
attachment
Zoom system
Base
Objective
White and black plate
Installation steps as image:
1.Mount zoom system to base,fix
with manual screw (11 in the
IIimage).
2.Mount MZx-BG-LED LED
fluorescence attachment to the
zoom system, fix with set screw (8
in the II image)
3.Mount trinocular head to the
fluorescence attachment, fix with
set screw (4 in the II image).
4.Screw in objective to the zoom
system,
5.Put on white and black plate to
the basement.

- 8 -
Ⅳ. Operation
Fluorescence observation:
1. Connect power adapter 13 is connected to a DC power seat 7, get on power.
2. Turn the brightness adjustment switch knob 6, you can hear "ding" sound.
3. The observation needs to select the corresponding excitation group, switching the light source
lever 9 to select LED excitation source, adjust the filter set turret 5 to select the corresponding filter group.
LED excitation light source and the filter group must be consistent.
4. The specimen was placed in a black and white carrier board, focusing eyepieces to achieve the sharpest
position, when using the eyepieces, adjust IPD and diopter.
5. Adjust the brightness adjustment switch knob 6 to achieve satisfactory lighting condition.
6. The camera can be connected on the C-mount interface 2 , pull the shift lever 3 to the eyepiece tube.
Bright field observation:
1. Turn off the brightness adjustment switch knob 6;
2. Filter set turret 5 switch to UV.
3. Open the corresponding bright field illumination.
Note：Finish using，please close brightness adjustment knob 6！

- 9 -
Ⅴ. Maintenance
1. Wipe the lens
Wipe the lens can be used with alcohol / ether mixture or xylene lens paper or cotton flower.
2. Wipe painted surfaces
Wipe painted surfaces, used gauze to remove dust. If grease dirt removed with gauze soaked some gasoline,
not with an organic solvent: Wipe painted surfaces and plastic parts (such as alcohol, ether and other
diluent).
3. Do not disassemble the microscope
Microscope is a precision optical instruments, all parts Do not be demolished, so as not to undermine its
operational effectiveness and accuracy. If the fault should be sent to professional maintenance department or
our factory for repair.
4. After using the device, close the LED light source
When not in use, please turn off the power switch, follow energy-saving, environmental protection, use of
the principle, and better maintenance of equipment.
5. When not in use
When the instrument is not in use, or polyethylene with plexiglass cover cover and store in a dry place and
no mold growth. The objective lens and the eyepiece is best placed in a sealed container with a desiccant.