MSI PRO-L J4205TI User manual

1
<󸙗󳽙 1> Contents
Contents
Safety Information...........................................................................................3
Specifications...................................................................................................4
Rear I/O Panel ................................................................................................. 6
LAN Port LED Status Table................................................................................6
Overview of Components ................................................................................ 7
SO-DIMM Slot.....................................................................................................8
JFP1, JFP2: Front Panel Connectors.................................................................8
SATA_POWER1: SATA Power Connector............................................................9
SATA1~2: SATA 6Gb/s Connectors.....................................................................9
M2_1: M.2 Slot (Key M).......................................................................................9
JUSB1~3: USB 2.0 Connectors ........................................................................10
JUSB4: USB 3.1 Gen1 Connector.....................................................................10
CPU_FAN1: CPU Fan Connector......................................................................11
SYS_FAN1: System Fan Connector..................................................................11
JCOM1: Serial Port Connector.........................................................................11
JSPK_SW1: Mono/ Stereo Sound Selection Jumper.......................................11
JLVDS1: LVDS Connector .................................................................................12
JLVDS_PWR1: LVDS Power Selection Jumper................................................12
JLVDS_BK1: LVDS Backlight Power Selection Jumper...................................13
JFPD1: Flat Panel Display Connector..............................................................13
JMONITOR_SW1: Flat Panel Display Switch Connector .................................13
JDMIC1: Digital Microphone Connector...........................................................13
JAMP1: Audio Amplifier Connector .................................................................13
JTPM1: TPM Module Connector.......................................................................14
JAUD1: Front Audio Connector ........................................................................14
JBAT1: Clear CMOS (Reset BIOS) Jumper.......................................................15
EZ Debug LED ..................................................................................................15
BIOS Setup.....................................................................................................16
Entering BIOS Setup.........................................................................................16
Resetting BIOS .................................................................................................17
Updating BIOS ..................................................................................................17
Thank you for purchasing the MSI®J4205TI PRO-L/ J3455TI
PRO-L/ J3355TI PRO-L motherboard. This User Guide gives
information about board layout, component overview, BIOS
setup and software installation.

2Contents
Software Description..................................................................................... 18
Installing Windows®10 ....................................................................................18
Installing Drivers..............................................................................................18
Installing Utilities.............................................................................................18

3
Contents Safety Information
Safety Information
yThe components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
yEnsure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
yHold the motherboard by the edges to avoid touching sensitive components.
yIt is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
yStore the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
yBefore turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
yDo not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
yIf you need help during any installation step, please consult a certified computer
technician.
yAlways turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
yKeep this user guide for future reference.
yKeep this motherboard away from humidity.
yMake sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
yPlace the power cord such a way that people can not step on it. Do not place
anything over the power cord.
yAll cautions and warnings on the motherboard should be noted.
yIf any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user
guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
yDo not leave this motherboard in an environment above 60C (140F), it may
damage the motherboard.

4Specifications
Specifications
CPU
yJ4205TI PRO-L - Intel®Pentium J4205 (Quad Core, 4 Thread,
2MB Cache, up to 2.6 GHz) Processor
yJ3455TI PRO-L - Intel®Celeron J3455 (Quad Core, 4 Thread,
2MB Cache, up to 2.3 GHz) Processor
yJ3355TI PRO-L - Intel®Celeron J3355 (Dual Core, 2 Thread,
2MB Cache, up to 2.5 GHz) Processor
Memory
DDR3/DDR3L SO-DIMM slot, support up to 8GB*
* Please refer www.msi.com for more information on
compatible memory.
Onboard Graphics
1x LVDS port, supports a maximum resolution of
1920X1200@60*
*LVDS panel support requires extra BIOS customization,
please contact local FAE for help.
Storage
Intel®Apollo Lake Express Chipset
y2x SATA 6Gb/s ports
y1x M.2 slot (Key M)
Supports up to PCIe 2.0 x2 and SATA 6Gb/s
Supports 2242/ 2260 storage devices
USB
Intel®Apollo Lake Express Chipset
y4x USB 3.1 Gen1 (SuperSpeed USB) ports (2 ports on the
back panel, 2 ports available through the internal USB
connector)
y7x USB 2.0 (High-speed USB) ports (2 ports on the back
panel, 5 ports available through the internal USB connector)
Audio yRealtek®ALC887 Codec
y7.1-Channel High Definition Audio
LAN 1x Realtek RTL8111H Gigabit LAN controller
Back Panel
Connectors
y2x USB 2.0 ports
y2x USB 3.1 Gen1 ports
y1x DC-IN power jack
y1x Line-Out jack
y1x Mic-In jack
Continued on next page

5
Specifications Specifications
Continued from previous page
Internal
Connectors
y1x 4-pin CPU fan connector
y1x 4-pin system fan connector
y1x Front panel audio connector
y2x Front panel connectors
y2x SATA 6Gb/s connectors
y1x TPM module connector
y1x Clear CMOS jumper
y1x Serial port connector
y1x LVDS connector
y1x LVDS power selection jumper
y1x LVDS backlight power selection jumper
y1x Flat panel display connector
y1x Flat panel display switch connector
y1x Mono/ Stereo sound selection jumer
y1x Digital microphone connector
y1x Audio amplifier connector
I/O Controller NUVOTON NCT5563D Controller Chip
Hardware
Monitor
yCPU/System temperature detection
yCPU/System fan speed detection
yCPU/System fan speed control
Form Factor yMini-ITX Form Factor
y6.7 in. x 6.7 in. (17 cm x 17 cm)
BIOS Features
y1x 64 Mb flash
yUEFI AMI BIOS
yACPI 5.0, PnP 1.0a, SM BIOS 2.8
yMulti-language
Software
yDrivers
yLIVE UPDATE 6
yNETWORK GENIE
ySUPER CHARGER
yFAST BOOT
yX-BOOST
yRAMDISK
yCPU-Z MSI GAMING
yNorton™ Internet Security Solution
yGoogle Chrome™ ,Google Toolbar, Google Drive

6Rear I/O Panel
Rear I/O Panel
LAN
DC-inUSB 3.1 Gen1
USB 2.0 Line-out
Mic in
Link/ Activity LED
Status Description
Off No link
Yellow Linked
Blinking Data activity
Speed LED
Status Description
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection
LAN Port LED Status Table

7
Rear I/O Panel Overview of Components
Overview of Components
JTPM1
JSPI1
SATA_POWER1
JAUD1
JFP1
JAMP1
JDMIC1
JFP2
JLVDS1
JLVDS_PWR1
JLVDS_BK1
JMONITOR_SW1
JFPD1
CPU_FAN1
EZ Debug LED
SYS_FAN1
JUSB4
JUSB3
JUSB1
JBAT1
JSPK_SW1
SATA2
SATA1
M2_1
JUSB2
JCOM1

8Overview of Components
SO-DIMM Slot
Please install the memory module into the SO-DIMM slot as shown below.
Important
y Due to chipset resource usage, the available capacity of memory will be a little less
than the amount of installed.
y Please note that the maximum capacity of addressable memory is 4GB or less
for 32-bit Windows OS due to the memory address limitation. Therefore, we
recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
1
2
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
1
2 10
9
JFP1
1 HDD LED + 2 Power LED +
3 HDD LED - 4 Power LED -
5 Reset Switch 6 Power Switch
7 Reset Switch 8 Power Switch
9 Reserved 10 No Pin
1
JFP2
1 Speaker - 2 Buzzer +
3 Buzzer - 4 Speaker +
HDD LED
RESET SW
HDD LED HDD LED -
HDD LED +
POWER LED -
POWER LED +
POWER LED
JFP1

9
Overview of Components Overview of Components
M2_1: M.2 Slot (Key M)
Please install the M.2 solid-state drive (SSD) into the M.2 slot as shown below.
1
2
3
4
5
Important
Intel®RST only supports PCIe M.2 SSD with UEFI ROM, does not support Legacy
ROM.
30
SATA_POWER1: SATA Power Connector
This connector is used to provide power to SATA device. Please use a SATA power
cable connect onboard SATA power connector with SATA device󾙓s power connector.
SATA1~2: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
SATA2
SATA1
Important
y Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
transmission otherwise.
y SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.

10 Overview of Components
JUSB4: USB 3.1 Gen1 Connector
This connector allows you to connect USB 3.1 Gen1 ports on the front panel.
1
10 11
20
1Power 11 USB2.0+
2 USB3_RX_DN 12 USB2.0-
3 USB3_RX_DP 13 Ground
4 Ground 14 USB3_TX_C_DP
5 USB3_TX_C_DN 15 USB3_TX_C_DN
6 USB3_TX_C_DP 16 Ground
7 Ground 17 USB3_RX_DP
8 USB2.0- 18 USB3_RX_DN
9 USB2.0+ 19 Power
10 NC 20 No Pin
Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.
JUSB1~3: USB 2.0 Connectors
This connector allows you to connect USB 2.0 ports on the front panel.
1
2 10
9
JUSB2/
JUSB3
1VCC 2VCC
3 USB0- 4 USB1-
5 USB0+ 6 USB1+
7 Ground 8 Ground
9 No Pin 10 NC
15
JUSB1 1VCC 2 USB0-
3 USB0+ 4 Ground
5 No Pin
Important
y Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
y In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI®SUPER CHARGER utility.

11
Overview of Components Overview of Components
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial ports with bracket.
1
2 10
9
1 DCD 2 SIN
3 SOUT 4 DTR
5 Ground 6 DSR
7 RTS 8 CTS
9 RI 10 No Pin
SYS_FAN1: System Fan Connector
This connector controls fan speed by changing voltage. You can go to BIOS >
Advanced > SYS Fan1 Control to adjust the fan speed manually.
CPU_FAN1: CPU Fan Connector
This connector allows you to connect a CPU fan, the fan speed will be always
maintained at 100%.
1
CPU_FAN1
1 Ground 2 +12V
3 Sense 4 Speed Control Signal
1
SYS_FAN1
1 Ground 2 Voltage Control
3 Sense 4 NC
JSPK_SW1: Mono/ Stereo Sound Selection Jumper
This connector is provided for audio amplifier options.
Stereo
(default)
Mono

12 Overview of Components
JLVDS1: LVDS Connector
The LVDS (Low Voltage Differential Signal) connector provides a digital interface
typically used with flat panels. After connecting an LVDS interface flat panel to
the LVDS connector, be sure to check the panel datasheet and set the LVDS power
connector to proper power voltage.
1
40
1 ODD_Lane3_P 21 NC
2 ODD_Lane3_N 22 EDID_3.3V
3 ODD_Lane2_P 23 LCD_GND
4 ODD_Lane2_N 24 LCD_GND
5 ODD_Lane1_P 25 LCD_GND
6 ODD_Lane1_N 26 ODD_CLK_P
7 ODD_Lane0_P 27 ODD_CLK_N
8 ODD_Lane0_N 28 BLKT_GND
9 EVEN_Lane3_P 29 BLKT_GND
10 EVEN_Lane3_N 30 BLKT_GND
11 EVEN_Lane2_P 31 EDID_CLK
12 EVEN_Lane2_N 32 BLKT_ENABLE
13 EVEN_Lane1_P 33 BLKT_PWM_DIM
14 EVEN_Lane1_N 34 EVEN_CLK_P
15 EVEN_Lane0_P 35 EVEN_CLK_N
16 EVEN_Lane0_N 36 BLKT_PWR
17 EDID_GND 37 BLKT_PWR
18 LCD_VCC 38 BLKT_PWR
19 LCD_VCC 39 NC
20 LCD_VCC 40 EDID_DATA
JLVDS_PWR1: LVDS Power Selection Jumper
Use this jumper to specify the operation voltage of the LVDS interface flat panel.
5V
(default)
3V 19V

13
Overview of Components Overview of Components
JLVDS_BK1: LVDS Backlight Power Selection Jumper
This connector is provided for LCD backlight options
19V 12V
(default)
11
JFPD1: Flat Panel Display Connector
This connector provides a high-speed interface typically used with flat panel displays.
1
81 BKLT_EN 5 KLT_GND/
Brightness_GND
2 BKLT_PWM 6 BKLT_GND/
Brightness_GND
3 BKLT_PWR 7 Brightness_Up
4 BKLT_PWR 8 Brightness_Down
JMONITOR_SW1: Flat Panel Display Switch Connector
This connector is used to connect an on/ off switch for flat panel display.
1
1 MON_SW 2 GND
JDMIC1: Digital Microphone Connector
This connector is used to connect to the digital microphone.
15
1 +3.3V 2 DMIC_DATA
3 GND 4 DMIC_CLOCK
5 No Pin
JAMP1: Audio Amplifier Connector
This connector is used to connect audio amplifiers to enhance audio performance.
11 Front_L- 2 Front_L+
3 Front_R+ 4 Front_R-

14 Overview of Components
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM
security platform manual for more details and usages.
1
2 14
13
1 LPC Clock 2 3V Standby power
3 LPC Reset 4 3.3V Power
5 LPC address & data pin0 6 Serial IRQ
7 LPC address & data pin1 8 5V Power
9 LPC address & data pin2 10 No Pin
11 LPC address & data pin3 12 Ground
13 LPC Frame 14 Ground
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.
1
2 10
9
1 MIC L 2 Ground
3 MIC R 4 NC
5 Head Phone R 6 MIC Detection
7 SENSE_SEND 8 No Pin
9 Head Phone L 10 Head Phone Detection

15
Overview of Components Overview of Components
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/ Reset
BIOS
Resetting BIOS to default values
1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.
EZ Debug LED
These LEDs indicate the status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates booting device is not detected or fail.

16 BIOS Setup
BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You should always keep the default settings to avoid possible system
damage or failure booting unless you are familiar with BIOS.
Important
y BIOS items are continuous update for better system performance. Therefore, the
description may be slightly different from the latest BIOS and should be held for
reference only. You could also refer to the HELP information panel for BIOS item
description.
y The pictures in this chapter are for reference only and may vary from the product
you purchased.
Entering BIOS Setup
Please refer the following methods to enter BIOS setup.
yPress Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.
yUse MSI FAST BOOT application. Click on GO2BIOS button and choose OK. The
system will reboot and enter BIOS setup directly.
Click on GO2BIOS
Function key
F1: General Help
F4: Enter CPU Specifications menu
F5: Enter Memory-Z menu
F6: Load optimized defaults
F10: Save Change and Reset*
F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
* When you press F10, a confirmation window which provides the modification
information appears. Select between Yes or No to confirm your choice.

17
BIOS Setup BIOS Setup
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
yGo to BIOS and press F6 to load optimized defaults.
yShort the Clear CMOS jumper on the motherboard.
Important
Please refer to the Clear CMOS jumper section for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Insert the USB flash drive that contains the update file into the computer.
2. Reboot the system, and then press Del key to enter the BIOS Setup during POST.
3. Go to BIOS > M-FLASH > Select one file to update BIOS and ME, select a BIOS file
to perform the BIOS update process.
4. After the flashing process is 100% complete, the system will reboot.
Updating the BIOS with Live Update 6
Before updating:
Make sure the LAN driver is already installed and the internet connection is set
properly.
Updating BIOS:
1. Install and launch MSI LIVE UPDATE 6.
2. Select BIOS Update.
3. Click on Scan button.
4. Click on Download icon to download and install the latest BIOS file.
5. Click Next and choose In Windows mode. And then click Next and Start to start
updating BIOS.
6. After the flashing process is 100% completed, the system will restart
automatically.

18 Software Description
Software Description
Please download and update the latest utilities and drivers at www.msi.com
Installing Windows®10
1. Power on the computer.
2. Insert the Windows®10 disc into your optical drive.
3. Press the Restart button on the computer case.
4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
5. Select your optical drive from the Boot Menu.
6. Press any key when screen shows Press any key to boot from CD or DVD...
message.
7. Follow the instructions on the screen to install Windows®10.
Installing Drivers
1. Start up your computer in Windows®10.
2. Insert MSI®Driver Disc into your optical drive.
3. The installer will automatically appear and it will find and list all necessary
drivers.
4. Click Install button.
5. The software installation will then be in progress, after it has finished it will
prompt you to restart.
6. Click OK button to finish.
7. Restart your computer.
Installing Utilities
Before you install utilities, you must complete drivers installation.
1. Insert MSI®Driver Disc into your optical drive.
2. The installer will automatically appear.
3. Click Utilities tab.
4. Select the utilities you want to install.
5. Click Install button.
6. The utilities installation will then be in progress, after it has finished it will
prompt you to restart.
7. Click OK button to finish.
8. Restart your computer.

1
<󸙗󳽙 1> 󻠘󼦗
󻠘󼦗
󼊷󼕳 󼜯󼯗........................................................................................................... 3
󻸛󼌀................................................................................................................... 4
󻈦󻟣 I/O 󽂗󺹿 .....................................................................................................6
LAN 󽅛󽀧 LED 󻸰󼹋 󽇋󼁋󻄳...................................................................................6
󺦋󼐃................................................................................................................... 7
SO-DIMM 󼀛󻗞 ....................................................................................................8
JFP1, JFP2: 󼕳󻟣 󽂗󺹿 󼱓󺺔󼺟..............................................................................8
SATA_POWER1: SATA 󼕳󼐿 󼱓󺺔󼺟 .....................................................................9
SATA1~2: SATA 6Gb/s 󼱓󺺔󼺟 .............................................................................9
M2_1: M.2 󼀛󻗞 (Key M) ......................................................................................9
JUSB1~3: USB 2.0 󼱓󺺔󼺟.................................................................................10
JUSB4: USB 3.1 Gen1 󼱓󺺔󼺟............................................................................10
CPU_FAN1: CPU 󽂛󼱓󺺔󼺟 ...............................................................................11
SYS_FAN1: 󼁋󼀓󼻋 󽂛󼱓󺺔󼺟 .............................................................................11
JCOM1: 󼁋󻜛󼌫 󽅛󽀧 󼱓󺺔󼺟 ...............................................................................11
JSPK_SW1: 󻠗󺻧/ 󼀓󼺻󻕷󼎓 󻸛󼐣󻉋 󻺏󼹌 󼕿󽃫.....................................................11
JLVDS1: LVDS 󼱓󺺔󼺟........................................................................................12
JLVDS_PWR1: LVDS 󼕳󼐿 󻺏󼹌 󼕿󽃫..................................................................12
JLVDS_BK1: LVDS 󻦠󻓫󼓣󽀧 󼕳󼐿 󻺏󼹌 󼕿󽃫 ......................................................13
JFPD1: 󽄸󽁿 󻊃󼀓󽉻󻕷󼓣 󼱓󺺔󼺟 .........................................................................13
JMONITOR_SW1: 󽄸󽁿 󻊃󼀓󽉻󻕷󼓣 󼀓󼑳󼯇 󼱓󺺔󼺟..............................................13
JDMIC1: 󻊃󼜯󼺧 󻜷󼓣󼷛 󼱓󺺔󼺟...........................................................................13
JAMP1: 󼎓󻊃󼎓 󼋟󽉳 󼱓󺺔󼺟 ...............................................................................13
JTPM1: TPM 󻠗󻈷 󼱓󺺔󼺟...................................................................................14
JAUD1: 󼕳󻟣 󽂗󺹿 󼎓󻊃󼎓 󼱓󺺔󼺟 ........................................................................14
JBAT1: CMOS (Reset BIOS) 󼷣󻜛󼌣 󼕿󽃫 ...........................................................15
EZ Debug LED ..................................................................................................15
BIOS 󻺓󼖄........................................................................................................ 16
BIOS 󻺓󼖄 ..........................................................................................................16
BIOS 󻜛󻺺 ..........................................................................................................17
BIOS 󼌴󻃟󼓣󽀧 ...................................................................................................17
MSI®J4205TI PRO-L/ J3455TI PRO-L/ J3355TI PRO-L
󻟃󼓧󻩣󻉋󻛫 󺫛󼓴󽋣󼙫󻻃󻺋 󺥿󻸛󽋘󻀷󻁓. 󼓣󻸛󼐘 󻺓󻟴󻺋󻀃 󻟃󼓧󻩣󻉋
󻕷󼓣󼊳󼐲, 󻫯󽇷 󺦋󼐃, BIOS 󻺓󼖄 󻥾󻻻󽉳󽀧󼑗󼌣 󻺓󼯇󼌿 󻁯󽋋 󻸰󻺧
󺸣󼍜󼒳 󼖋󺩤󽋇󺩏 󼓷󼀤󻀷󻁓.

2󻠘󼦗
󻻻󽉳󽀧󼑗󼌣 󻺓󻟴............................................................................................... 18
Windows®10 󼐣󼍰 󼨣󼖋 󻺓󼯇󽋇󺮟.......................................................................18
󻉋󻓫󼓣󻧳 󻺓󼯇󽋇󺮟..............................................................................................18
󼒏󽁧󻜛󽁟 󻺓󼯇󽋇󺮟..............................................................................................18