MULTIQUIP Whiteman series User manual

OPERATION MANUAL
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
SERIES
MODEL HTXG6DF
HYDRAULIC RIDE-ON TROWEL
(PSI 2.4L DUAL FUEL)
Gas and Propane Engine
Revision #3 (08/30/19)
PN: 42543
To find the latest revision of this publication or
associated parts manual, visit our website at:
www.multiquip.com

PAGE 2 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)
PROPOSITION 65 WARNING

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 3
Grinding/cutting/drilling of masonry, concrete, metal and
other materials with silica in their composition may give
off dust or mists containing crystalline silica. Silica is a
basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Repeated and/or
substantial inhalation of airborne crystalline silica can
cause serious or fatal respiratory diseases, including
silicosis.Inaddition, California and some other
authorities have listed respirable crystalline silica as a
substance known to cause cancer. When cutting such
materials, always follow the respiratory precautions
mentioned above.
WARNING
Grinding/cutting/drilling of masonry, concrete, metal and
other materials can generate dust, mists and fumes
containing chemicals known to cause serious or fatal
injury or illness, such as respiratory disease, cancer,
birth defects or other reproductive harm. If you are
unfamiliar with the risks associated with the particular
process and/or material being cut or the composition of
the tool being used, review the material safety data
sheet and/or consult your employer, the material
manufacturer/supplier, governmental agencies such as
OSHA and NIOSH and other sources on hazardous
materials. California and some other authorities, for
instance, have published lists of substances known to
cause cancer, reproductive toxicity,or other harmful
effects.
Control dust, mist and fumes at the source where
possible. In this regard use good work practices and
follow the recommendations of the manufacturers or
suppliers, OSHA/NIOSH, and occupational and trade
associations.Water should be used for dust
suppression when wet cutting is feasible. When the
hazards from inhalation of dust, mists and fumes cannot
be eliminated, the operator and any bystanders should
always wear a respirator approved by NIOSH/MSHA for
the materials being used.
WARNING
SILICOSIS WARNING RESPIRATORY HAZARDS
SILICOSIS/RESPIRATORY WARNINGS

PAGE 4 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)
TABLE OF CONTENTS
HTXG6DF Ride-On Trowel
Proposition 65 Warning ........................................... 2
Silicosis/Respiratory Warnings ................................ 3
Table Of Contents.................................................... 4
Training Checklist .................................................... 6
Daily Pre-Operation Checklist ................................. 7
Safety Information ............................................. 8–15
Lifting And Transporting................................... 16–19
Dimensions............................................................ 20
Specifications ........................................................ 21
Noise And Vibration............................................... 22
General Information............................................... 23
Components .................................................... 24–26
Basic Engine.......................................................... 27
Inspection ........................................................ 28–30
Setup/Operation .................................................... 31
Operation......................................................... 32–39
Maintenance.................................................... 40–75
Troubleshooting ............................................... 76–78
NOTICE
Specifications are subject to change without notice.

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 5
NOTES

PAGE 6 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)
TRAINING CHECKLIST
Training Checklist
No. Description OK? Date
1Read operation manual
completely
2
Machine layout, location of
components, checking of engine
and hydraulic oil levels
3 Fuel system, refueling procedure
4 Operation of spray and lights
5Operation of controls (machine
not running)
6Safety controls, safety stop switch
operation
7 Emergency stop procedures
8 Startup of machine
9 Maintaining a hover
10 Maneuvering
11 Pitching
12 Matching blade pitch.
Smart Pitch™
13 Concrete finishing techniques
14 Shutdown of machine
15 Lifting of machine (lift loops)

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 7
DAILY PRE-OPERATION CHECKLIST
Daily Pre-Operation Checklist      
1 Engine oil level
2 Hydraulic oil level
3 Radiator coolant level
4 Condition of blades
5 Blade pitch operation
6 Safety stop switch operation
7 Steering control operation

PAGE 8 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)
SAFETY INFORMATION
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.
SAFETY MESSAGES
The four safety messages shown below will inform you
about potential hazards that could injure you or others.The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DANGER, WARNING, CAUTION
or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided,
COULD result in DEATH or SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided,
COULD result in MINOR or MODERATE INJURY.
NOTICE
Addresses practices not related to personal injury.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
Lethal exhaust gas hazards
Explosive fuel hazards
Burn hazards
Rotating parts hazards
Symbol Safety Hazard
Pressurized fluid hazards
Hydraulic fluid hazards

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 9
SAFETY INFORMATION
DECALS
Decals associated with the operation of this equipment
are defined below.
To avoid injury you must read and understand
operator’s manual before using this machine.
WARNING
Read Manual
DECAL
Lift Point
Attach lifting strap to this point.
NOTICE
Wear appropriate clothing before operating trowel.
NOTICE
WARNING
DEFINITION
P/N 36099
DANGER
Guard Hazard
operate equipment with guards
removed. Serious bodily injury could result.
DO NOT
operate equipment with guards
removed. Keep hands and fingers clear of gears.
Serious bodily injury could result.
DO NOT
Keep hands and fingers clear from engine
fan blades. Moving parts can cut.
remove guards.DO NOT
DANGER
Rotating Blade Hazard
Keep persons clear from a lifted trowel.
DO NOT stand below the trowel.
DO NOT lift trowel with pans attached.
DANGER
Lifting/Crush Hazard
Fuel Type
The engine used in this equipment requires
.
unleaded gasoline.
NOTICE
DO NOT light matches around or near this
equipment. This equipment contains highly
flammable fuel. If ignited, could start a
causing equipment damage and severe
bodily harm even death!
fire
DANGER
Fire Hazard
Entanglement/Crush Hazard.
Protective Clothing
DECAL DEFINITION
L
P/N 23803-XXX
WA
XXX
dB
Noise Level
NOTICE
Indicates value of sound pressure of
equipment. Measured at operator’s seat.
Hot steam or coolant may escape when
radiator cap is removed, causing severe
burns. Allow radiator to cool before
removing cap.
DANGER
Explosion Hazard
DO NOT smoke around or near this
equipment. This equipment contains highly
flammable fuel. If ignited, could start a fire
causing equipment damage and severe
bodily harm — even death!
DANGER
Fire Hazard
DO NOT smoke around or near this
equipment. This equipment contains highly
flammable fuel. If ignited, could start an
explosion causing equipment damage
and severe bodily harm — even death!
DANGER
Fire Explosion Hazard
DANGER
Inhalation Hazard
DO NOT use this equipment in an
enclosed area. The engine used with
this equipment emits harmful levels of
carbon monoxide which can cause
severe bodily harm — even death!
This machine to be operated by qualified
personnel only. Ask for training as needed.
WARNING
Ask for Help/Training

PAGE 10 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)
SAFETY INFORMATION
GENERAL SAFETY
CAUTION

NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.

Avoid wearing jewelry or loose fitting clothes that may
snag on the controls or moving parts as this can cause
serious injury.

NEVER operate this equipment when not
feeling well due to fatigue, illness or when
under medication.

NEVER operate this equipment under the
influence of drugs or alcohol.
P/N ?????
Cold weather starting below 40°F (4°C).
Run engine 3–5 minutes while moving
steering controls before depressing
blade control pedal.
WARNING
Cold Weather Conditions
When drive bypass switch is activated,
equipment working lights will flash indicating
that blades may be turned without an
operator in the seat. USE EXTREME
CAUTION in this drive mode!
WARNING
Drive Bypass Switch
DECAL DEFINITION
Trowel rotor speeds are factory set.
Tampering with settings can lead to
damage and void machine warranty.
WARNING
Hydraulic Pump
ALWAYS clear the work area of any debris, tools, etc.
that would constitute a hazard while the equipment is
in operation.

No one other than the operator is to be in the working
area when the equipment is in operation.
DO NOT
use the equipment for any purpose other than
its intended purposes or applications.
NOTICE

This equipment should only be operated by trained and
qualified personnel 18 years of age and older.

Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.

Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
NEVER
use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
ALWAYS know the location of the nearest
fire extinguisher.
ALWAYS know the location of the nearest
first aid kit.
ALWAYS know the location of the nearest phone or
keep
a phone on the job site.
Also, know the phone numbers
of the nearest ambulance, doctor and
fire department.
This information will be invaluable in the case of an
emergency.