Multistore CLASSIC MSM-716 User manual

Assembly InstructIons
1650H x 500W x 450D
PACKS
2
ADJuStAbLe
SHeLveS
4
WHITE #0027277 LIgHT Oak #2683502 Dark COCO #2683540
mSm-716
CLASSIC rAnge

ASSEMBLY INSTRUCTION FOR MAXI AND MSM 716
PARTS IDENTIFICATION LIST
2 x GABLES
1 x BACKING BOARD FOLD LINE 3 x FIXED SHELF
3 x ADJUSTABLE
SHELF
1 x BOTTOM KICK
AF
G
B
C , D & E
H
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 18
2CAPS 18
3BACKING NAILS 75
NO MODEL DESCRIPTION QTY
5SHELF PINS 12
6BRACKETS 1
7BRACKET UNIT SCREW 1
8BRACKET WALL SCREW 1

FIRST STEP:- UNPACKED YOUR CARTON PART 1 OF 2, LAY A,B,C,E ,F ON FLOOR RETRIEVE THE LEFT-
HAND GABLE (A) FACING DOWN ON THE EDGED FRONT.
USING THE 30mm 8 GAUGE CONFIRMAT SCREWS PROVIDED YOU CAN NOW SCREW YOUR KICK FIRST,
BOTTOM SHELF NEXT AND THEN TOP SHELF ATTACHED ONTO THE LEFT-HAND GABLE. WHEN FINISHED
DO THE SAME TO THE RIGHT-HAND GABLE. LEAVE YOUR CARCASS FACING DOWN AND GO TO STEP 2.
STEP 2:- FOLD OUT YOUR BACK AND PROCEED TO NAIL (3) ON MAKING SURE YOU ARE LEVEL AT ALL
TIMES, THE BACKING IS SLIGHTLY SMALLER THAN THE UNIT SO MAKE SURE YOU START 1mm IN FROM
THE EDGE, YOUR NAILS GENERALLY SIT 100mm APART, STAND YOUR UNIT UP NOW YOU CAN PROCEED
TO PUT YOUR ADJUSTABLE SHELVES IN.
PROCEED TO POSITON
YOU’RE ADJUSTABLE
SHELVES (H) WHERE
NECESSARY
STEP 1
STEP 3 FINISHED
TOP
BOTTOM
STEP 2
D
PROCEED TO NAIL
YOUR BACKING ON
LAYING FACE
DOWN
H

multistore.com.au
Multistore Industries (Aust) Pty Ltd
9 Nevilles Street, Underwood QLD 4119 P:[phone] [email protected]
For easy assembly instructions, please refer to video on our website: www.multistore.com.au
Versatile Storage Units
for any room