Multistore EXC-ST User manual

Assembly InstructIons
WHITE #2669930 LIgHT Oak #2683476 Dark COCO #2683514
2000H x 250W x 450D
SHoe
toWer
1
PACK
1
eXeCutIve rAnge
eXC-St

HARDWARE
ASSEMBLY INSTRUCTION FOR EXC-ST
2 x TOP GABLES
When aaching unit to wall put safety bracket in
middle of unit with 5/8 pan screw then 25mm pan
head screw into wall. For plasterboard without a
stud it is recommended to use a plug with screw
(not provided).
2 x BOTTOM GABLES
6
24
1
1
5
6
7
81

ALIGN YOUR SHELVES AND KICK TO THE
LEFT-HAND GABLE, SCREW THEM INTO
PLACE ATTACH YOU RIGHT-HAND GABLE
AND DO THE SAME.
TAKE OUT BOTH TOP AND BOTTOM BACKS PROCEED TO NAIL
THEM INTO POSITION , YOUR TOP BACK IS SLIGTHLY LONGER
THIS NAILS INTO THE BACK OF THE FIXED SHELF MAKING SURE
YOU ARE SQUARE AT ALL TIMES. NEXT STEP:
GRAB THE SHELF PINS
AND PUSH THEM INTO
THE HOLES PROVIDED
THESE WILL SUPPORT
YOUR ADJUSTABLE SHELV-
ING YOU MAY PUT THEM
WHERE EVER YOU LIKE.
YOU ARE NOW FINISHED.

multistore.com.au
Multistore Industries (Aust) Pty Ltd
9 Nevilles Street, Underwood QLD 4119 P:[phone] [email protected]
For easy assembly instructions, please refer to video on our website: www.multistore.com.au
Versatile Storage Units
for any room