Multistore MAXI ULTRA H2 User manual

ASSEMBLY INSTRUCTION FOR MAXI ULTRA H2
1x CAM SHELF
2 x FIXED SHELF
1 BOTTOM KICK
1 x BACKING BOARD FOLDED IN THE MIDDLE
PARTS IDENTIFICATION LIST
When aaching unit to wall put safety bracket in
middle of unit with 16mm pan head screw then
25mm pan head screw into wall. For plasterboard
without a stud it is recommended to use a plug with
screw (not provided).
TOP of UNIT
4
NO MODEL DESCRIPTION QTY
1CONFIRMAT SCREWS 50mm x 5mm 14
2CAPS 14
4BACKING NAILS 54
516mm WOOD SCREW 12
6 30mmHANGING RAIL 1
730mm FLANGES—PER SET OF 2 1
NO MODEL DESCRIPTION QTY
8WHITE CAMS 4
9CAM PINS 4
10 16mm PAN HEAD SCREWS 1
11 25mm PAN HEAD SCREWS 1
12 “L” SAFETY BRACKET 1
1 x L & R GABLE
FOLD LINE

FOLD OUT BACK, PROCEED TO NAIL THEM
INTO POSITION MAKING SURE YOU ARE
SQUARE.
NEXT STEP.
TAP INTO POSITION YOUR
FLANGES INTO THE HOLES
PROVIDED IF WISH YOU CAN
PUT 1 SCREW IN THE FLANGE
IN THE WHOLE PROVIDED
NOW INSERT YOUR HANGING
RAIL.
YOUR UNIT IS NOW READY TO
BE PUT INTO PLACE.
NEXT. GO TO YOUR DRAWER
ASSEMBLY SHEET ON HOW TO
CREATE YOUR DRAWER.
INSERT YOUR 4 PINS (9) INTO
THE HOLE NO: (13) PROVIDED.
INSERT THE CAMS INTO THE
HOLES PROVIDED ON THE
BOTTOM OF THE SHELF.
USING SCREW DRIVER TWIST
CAM INTO LOCK POSITION.