Multistore EXC-750H3 User manual

Assembly InstructIons
eXeCutIve rAnge
PACKS
2
StAnDArD
DrAWerS
2
HAngIng rAIL
1
FIXeD SHeLF
1
2000H x 750W x 450D
WHITE #2669936 LIgHT Oak #2683482 Dark COCO #2683520
eXC-750H3
Jumbo
DrAWer
1


When aaching unit to wall put safety bracket in
middle of unit with 5/8 pan screw then 25mm pan
head screw into wall. For plasterboard without a
stud it is recommended to use a plug with screw
(not provided).
PARTS IDENTIFICATION LIST
   
1CONFIRMAT SCREWS 14
2CAPS 14
3DOWELS 4
4BACKING NAILS 75
5710x30mmHanging Rail 1

2 x TOP GABLES
2 x BOTTOM GABLES
2 x FIXED SHELF
1 x BOTTOM KICK
1 x CAM SHELF
   
6WHITE CAMS 4
7CAM PINS 4
85/8 PAN HEAD SCREWS 1
925mm PAN HEAD SCREWS 1
10 “L” SAFETY BRACKET 1
11 RAIL FLANGE 30mm 2
-
1 x 717mm H MOULD
1035mm x 445m x 16mm
966mm x 445m x 16mm
718mm x 445mm x 16mm
718mm x 61 x 16mm
2 x BACKING BOARDS
718mm x 445mm x 16mm
975mm x 744 x 3

BOTTOM
962mm x 744 x 3

TOP

RAIL SUPPORT
BRACKETS DOWELS FIXED SHELF KICK




-





-
-



-



“” 









-



IN PART 2 INSERT YOUR 4 PINS (7) INTO
THE HOLE NO: (11) PROVIDED.
INSERT THE CAMS INTO THE
HOLES PROVIDED ON THE
BOTTOM OF THE SHELF.
USING SCREW DRIVER TWIST
CAM INTO LOCK POSITION.




IMPORTANT NOTICE:
PLACE THE FITTING OVER THE HOLE KEEPING THE SQUARE
EDGE OF THE FITTING PARALLEL TO THE FACE OF THE BOARD,
KNOCK IN .
3 x DRAWER ASSEMBLY INSTRUCTION






-


-
.
   
6CAMS 6
7CAM PINS 6
830mm 8 GAUGE SCREW 3
9EURO SCREWS 12
10 HANDLE 3
11 RUNNERS PER SET 3
   
1CONFIRMAT SCREWS 12
2DOWELS 12
3BACKING NAILS 60
45/8 X 6 WOOD SCREWS 18
5 INFILL 1









DRAWER ASSEMBLY
C-LEFT-GABLE RUNNER












.


DIAGRAM 1
30. ● ●
29. ● ●
28. ● ●
27. ● ●
26. ● ●
25. ● ●
24. ● ●
23. ● ●
22. ● ●
21. ● ●
20. ● ●
19. ● 5mm HOLES ●
18. ● ●
17. ● ●
15. ● ●
15. ● ●
14. ● ●
13. ● ●
12. ● ●
11. ● ●
10. ● ●
9. ● ●
8. ● ●
7. ● ●
6. ● ●
5. ● ●
4. ● ●
3. ● ●
2. ● ●
1. ● ●
* * *
MAXI ULTRA ‘H’ SERIES
Models Hole Positions CAM PIN-Hole Positions
H1 1 8
HS2 1 8 – 15
H2 1 – 8 13
HS 8
MAXI ULTRA & ULTRA SERIES
Models Hole Positions Models Hole Positions
450 1-6-11-16 LSD550 1-8
315C 1-8-15-20 LSD330 1
515 1-6-11-16-21
Executive 750 ‘H’ SERIES
Models Hole Positions CAM PIN-Hole Positions
HS 8
H1 1 8
H2 1 – 6 11
H3 1 – 8 – 13 20
MAXI & MSM SERIES
Models Hole Positions Fixed Shelf Position
16J3 1 – 8 – 15 22
C16 1 – 8 – 15 – 20 – 25 30
C06 1 – 8 – 15 – 20 – 25 30
600J3 8 – 15 - 22
400J3 1 – 8 – 15
Executive Series
Models Hole Positions Fixed Shelf Position
EXC – 4J 1 – 8 – 15 - 22 N/A
EXC – 5C 1 – 8 – 15 – 20 – 25 N/A
EXC – 4B 8 – 16 – 24 - 32 N/A
EXC – 2B 8 – 14 N/A
EXB - 5C 1 – 8 – 15 – 20 – 25 N/A
EXB – 4J 1 – 8 – 15 – 20 N/A
EXB – 4B 8 – 16 – 22 – 28 N/A
INSTRUCTIONS FOR RUNNER PLACEMENT

Place metal runners in their correct hole posions
(see above DIAGRAM 1) making sure CL = LEFT HAND
GABLE & CR = RIGHT HAND GABLE, then aach using
the special 7.5 euro screws provided.
(see diagram to the right).

multistore.com.au
Multistore Industries (Aust) Pty Ltd
9 Nevilles Street, Underwood QLD 4119 P:[phone] [email protected]
For easy assembly instructions, please refer to video on our website: www.multistore.com.au
Versatile Storage Units
for any room