Multistore LSD 550 User manual


ASSEMBLY INSTRUCTION FOR LSD 550
2 x FIXED SHELVES
1 x BOTTOM KICK
1 x FOLDED BACK
C & D

   
CONFIRMAT SCREWS 50mm x 5mm 
CAPS 
BACKING NAILS 
16mm PAN HEAD UNIT WOOD SCREWS 
25mm PAN HEAD WALL WOOD SCREWS 
“L” SAFETY BRACKET 


B

When aaching unit to wall put safety bracket in
middle of unit with 16mm pan head screw then
25mm pan head screw into wall. For plaster-
board without a stud it is recommended to use a
plug with screw (not provided).

ASSEMBLY INSTRUCTION FOR LSD 550



-




 IMPORTANT NOTICE:
PLACE THE FITTING OVER THE HOLE KEEPING THE
SQUARE EDGE OF THE FITTING PARALLEL TO THE FACE
OF THE BOARD, KNOCK IN .
DRAWER ASSEMBLY 2 DRAWER INSTRUCTION






-


-
.
   
6CAMS 4
7CAM PINS 4
830mm 8 GAUGE SCREW 3
9EURO SCREWS 8
10 HANDLE 2
11 RUNNERS PER SET 2
   
1CONFIRMAT SCREWS 8
2DOWELS 8
3BACKING NAILS 40
45/8 X 6 WOOD SCREWS 12
5 INFILL 1









DRAWER ASSEMBLY
C-LEFT-GABLE RUNNER












.



[phone] -



Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entled to
a replacement of refund for major failure.
10 Year Warranty
• If the purchaser has a fault or defect with this product, the purchaser needs to contact Mulstore Industries
(Aust) directly on [phone] and state date of purchase, place of purchase and proof of purchase.
• Mulstore Industries (Aust) will replace any faulty or defect parts at no cost to the customer. A replacement
will be sent to you as soon as possible, or product can be exchanged at the store of purchase.
• This warranty is in addion to other rights and remedies of the customer under law.
Sincerely,
Mulstore Industries (Aust) Management
WARRANTY