Multitech MultiConnect MicroCell MTCM-LAT3 User manual

MultiConnect®MicroCell Cellular Modem
(MTCM-LAT3 and MTCM-LSP3 )
MTCM-LAT3 and MTCM-LSP3 Quick Start
MultiConnect®MicroCell Cellular Modem (MTCM-LAT3 and MTCM-LSP3 ) MultiTech Systems MultiConnect®MicroCell Cellular Modem (MTCM-LAT3 and MTCM-LSP3 ) MultiTech Systems
Quick Start Quick Start
Mounting Device
1. Locate the groove on the bottom of the cellular modem.
2. Slide the mounting rod through the groove.
3. To secure the rod to the desired surface, place and tighten
two screws in the holes on either end of the mounting rod.
Refer to the user guide for an illustration of the mounting
rod, as well as the dimensions for placement of the screws.
Regulatory Information
For additional regulatory information, see your device’s user guide or go
to your device’s page at http://www.multitech.com
47 CFR Part 15 Regulation Class B Devices
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
■Consult the dealer or an experienced radio/TV technician for
help.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
MultiConnect®Cell 100 Series Cellular Modem (MTCM-
LAT3 and MTCM-LSP3)
Document Part Number: 82103452L
Copyright and Trademarks
This publication may not be reproduced, in whole or in part, without the
specific and express prior written permission signed by an executive
officer of Multi-Tech Systems, Inc. All rights reserved. Copyright © 2018
by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties,
whether express, implied or by estoppels, with respect to the content,
information, material and recommendations herein and specifically
disclaims any implied warranties of merchantability, fitness for any
particular purpose and non-infringement. Multi-Tech Systems, Inc.
reserves the right to revise this publication without obligation to notify any
person or organization of such revisions or changes.
MultiConnect, MultiTech and the MultiTech logo are registered
trademarks of Multi-Tech Systems, Inc. All other brand and product
names are trademarks or registered trademarks of their respective
companies.

MultiConnect®MicroCell Cellular Modem (MTCM-LAT3 and MTCM-LSP3 ) MultiTech Systems MultiConnect®MicroCell Cellular Modem (MTCM-LAT3 and MTCM-LSP3 ) MultiTech Systems MultiConnect®MicroCell Cellular Modem (MTCM-LAT3 and MTCM-LSP3 ) MultiTech Systems
Quick Start Quick Start Quick Start
Overview
The MultiConnect®MicroCell Cellular Modem (MTCM-LAT3 and MTCM-
LSP3) provides secure data communication between many types of
devices that use legacy and the latest communication technologies.
Package Contents
Your MultiConnect®MicroCell 100 Series Cellular Modem (MTCM-LAT3
and MTCM-LSP3) typically includes the following (varies with model):
Antennas 2 - external antennas
Documents 1 - Quick Start Guide, 1 - Warranty Plans, 1 -
Activation, Support & Regulatory Information
Other Items 1 - Mounting rod, 4 - Clear adhesive bumpons or
mounting feet
Device 1- MultiConnect®MicroCell 100 Series Cellular
Modem
Additional Information
For more information on your device, refer to the appropriate user guide:
https://www.multitech.com/brands/multiconnect-microcell.
Note: If this quick start has been updated, the update will be available
at that location.
Dimensions
The device dimensions are:
■2.105 in x 0.780 in x 1.79 in (5.35 cm x 1.98 cm x 4.55 cm)
Side Panels for MTCM-LAT3
Connectors
The device has the following connectors:
■USB 1 USB connector,
■SMA 2 female SMA connectors, labeled CELL and AUX
■SIM 1 micro-SIM slot, between the SMA connectors
LED Descriptions
The top panel contains the following LEDs:
■POWER - Lights when the device has power.
■LINK - Blinks when the unit is functioning normally.
■SIGNAL - Three programmable signal LEDs do not function by
default and require the user to write code in order to control
them.
Installing a SIM Card
To operate the device on a cellular network, you need a micro-SIM card
(3FF) from your carrier.
To install the SIM card:
1. Locate the SIM card slot on the side of the cellular modem.
The slot is labeled SIM.
2. Push the SIM card into the slot with the contact side facing
down as shown. When the SIM card is installed, it locks into
place.
Installing the Cellular Modem
1. Connect antennas to the antenna connectors.
2. Connect the USB connector to your computer, either
directly or through a hub.
The USB connection powers the device and the POWER LED lights.