MUNBYN 130 User manual

MUNBYN
More Choice
For Your Growing Business

1.1 What’s in the package?
Contents 01 Product Introduction
If contents are missing or damaged, please contact us.
01 Product Introduction
1.1 What’s in the package?
1.2 Printer features
2.1 Quick printer connection
2.2 Label setup
2.3 Driver installation
2.3.1 Windows Driver Installation
2.3.2 Mac Driver Installation
02 Set Up The Printer
03 Pro Tips
04 FAQ
05 LED Status
06 Feeder Button Instruction
07 Specifications
08 Safety Notices
09 Tech Support
01
01
02
03
03
04
04
04
02
05
05
06
06
07
08
09
Printer
USB Cable Power Adapter Power Cord
Quick Tips Labels
USB Flash Driver
User Manual
01

1.2 Printer Overview 2.1 Quick printer connection
2.2 Label setup
Load no less than 4
consecutive labels into the
printer.
After the paper is stable,
press and hold feeder
button, until you hear a
beep.
Then, the printer will
automatically label
identification.
Recommended:
Watch the short setup video at:
www.bit.ly/unboxing130
02 Set Up The Printer
Automatic label
identification:
Please follow the sequence of the above picture to
operate.
Feeder button
and status light
DC power
connector
USB
connector
Power
switch
Cover button
Cover
button
0302

2.3 Driver installation
For the latest driver, please visit:
www.bit.ly/driver130
03 Pro Tips
04 FAQ
FAQ file, please visit:
www.bit.ly/130faq
Please run the downloaded software from
the web address indicated above and follow the
prompts to complete installation.
2.3.1 Windows Driver Installation
2.3.2 Mac Driver Installation
Anytime you change your label, run the automatic
label identification.
Press the feeder button on the printer to skip a blank
label.
To run a self-test, press and hold the feeder button
until you hear two short beeps.
To ensure your printing quality, please use MUNBYN labels.
If you use other brands' label paper, please run "automatic
label identification" before printing.
Regularly clean the printer head.
If the paper is jammed and the red light flashes, run
Automatic label identification.
Insert Munbyn into the same USB port on your
computer every time. This will avoid creating duplicate
copies of the printer in your operating system.
0504

05 LED Status 07 Specification
06 Feeder Button Instruction
Printer status Feeder button Function
Printing Press the button Pause printing
Standby
Standby Reset Printer
Press and hold on until
you hear one beep Automatic label
identification
Press and hold on until
you hear five beeps
Light Description Troubleshoot
Normal operation
Label paper is
not identified
Cover is not closed
Printer head is
overheated
Run automatic label
identification
/
Blue
(every 2 seconds)
Flashing Red
(every 1 second)
Flashing Red
Flashing Blue
and Red
Check that the cover
is completely closed
Printer will automatically
resume once the printer
head has cooled down
Method Direct Thermal
Resolution 203 dpi
Max Printing Speed 150 mm/s
Paper Width 40-110 mm (1.57-4.3inches)
Paper Thickness 0.06-0.25 mm
Power Adapter 24V / 2.5A
Printing Life TPH 100Km
Operating
Environment
Temperature: 0 to 45 °C
Humidity: 10-90% (non condensing)
Storage
Environment
Temperature: -10 to 50 °C
Humidity: 10-80% (non condensing)
Connection USB
Weight 1.76 lbs/0.8kg
Dimensions 182x99x87mm(L*W*H)
0706

08 Safety Notices 09 Tech Support
E-mail: [email protected]
Whatsapp: [phone]
Phone: [phone]
Skype: munbyn
Support time:
Monday to Friday 24 hours.
MUNBYN provides 18 months warranty and lifetime free
service.
If you encounter any issues with the product, please
contact the MUNBYN team to promptly receive trouble-
shooting tips or a replacement.
Website: www.munbyn.com
(how-to videos, warranty details)
The printer head can become very hot after printing
labels. Do not touch the printer head.
Do not bend the power cord excessively or place
objects on the cord.
Do not use the printer if you find any irregularities as
these could result in fire or electrocution.
Keep the printer out of reach of children.
Use only approved accessories and do not try to
disassemble, repair the unit by yourself.
Keep the printer away from water and other objects
that could penetrate the components.
Please unplug the printer when it is not in use for long
periods.
0908