MyCharge AMPMINI User manual

CHARGING DEVICES USING YOUR AMPMINI
If your device is charged through a micro-USB port, feel free to use
the recharging cable provided, otherwise use your own device’s
cable to charge it. When the device is plugged in, the AMPMINI
will continue to charge it until it is unplugged or runs out of power.
With SmartSense™ technology, your AMPMINI is compatible with
just about any smartphone on the market. It senses what device
it’s plugged into and provides the maximum power allowed,
giving you the benet of faster charging. The AMPMINI’s high
eciency technology minimizes energy loss from the input source
to the powerbank and from the powerbank to the device.
RECHARGING YOUR AMPMINI
Connect the included recharging cable to your AMPMINI and to a
power source – wall, computer, or car. Pass through charging
allows you to charge both the powerbank and your device
simultaneously.
As your AMPMINI recharges, the LEDs will illuminate to indicate the
battery level. A fully charged unit shows 4 solid, non-blinking LEDs. It
is normal for your AMPMINI to be warm to the touch while in use.
WELCOME!
Congratulations, you’re now the proud owner of the myCharge
AMPMINI. This powerbank was designed with your on-the-go
charging needs in mind and is compatible with virtually all USB
devices.
The portable powerbank’s 2200mAh battery capacity guarantees
that your device can stay charged and connected wherever your
travels may take you.
PRODUCT SPECS
• Battery Capacity: 2200mAh Battery
• Micro-USB Input: 5VDC, 0.7A-1.0A
• USB Output: 5VDC, 1.0A
• Dimensions: 2.8 x1.4 x 0.9 inches
• Weight: 0.17 lbs.
PRODUCT TECHNOLOGIES
Your new powerbank is built with these technologies to give you
the fastest, safest, and smartest user experience possible:
SMART SENSE™
Detects the connected device and charges it at the maximum
speed allowed by the device, shortening charge time
PASS-THROUGH CHARGING
Charges the powerbank and the device in parallel. You’ll have
both charged for extra power when you need it
BATTERY PROTECTION
Protects the powerbank and your device against overcharging,
undercharging, overtemperature, overcurrent and short circuit for
your safety
HIGH EFFICIENCY
Maximizes power to your device by minimizing the loss of energy
delivered, keeping you powered longer
myCharge AMPMINI Manual
AMPMINI
PACKAGE CONTENTS
• myCharge AMPMINI
• Micro-USB Recharging Cable
• Quickstart Guide
COMPATIBILITY
Virtually all smartphones
>Watch the instructional video: mycharge.com/pages/videos
HELPFUL TIP
AMPMINI Manual
Power button
Micro-USB recharging port
LED indicators USB port

= 0% - 25%
= 26% - 50%
= 51% - 75%
= 76% -100%
CHECKING BATTERY LEVEL
To check the battery level, press the power button. The LEDs will
illuminate to show you how much battery life remains – 4 solid LEDs
mean your AMPMINI is fully charged and 1 LED means that it’s
almost empty. If you see 1 LED blinking, this means you have less
than 5% remaining and should recharge.
FAQ/TROUBLESHOOTING
Which port recharges my AMPMINI and which charges my device?
The small micro-USB port is used to recharge your AMPMINI
(recharge cable included). The larger USB port is used for charging
your device with your own cable.
Will my AMPMINI charge any smartphone?
Your AMPMINI is fully compatible with virtually all smartphones. The
powerbank will identify which device is connected through its
SmartSense™ technology.
What can I use to recharge my AMPMINI?
You can recharge your AMPMINI by connecting it to any USB port
through the recharging cable provided. For maximum charging
speed connect to a wall USB adapter or car outlet.
What should I do if my device doesn’t charge?
Press the power button of your AMPMINIto initiate charging and to
check battery level. It is possible that there is simply not enough
power to charge your device, recharge your AMPMINI if needed. If
your device still isn’t charging, check that the charging cable is
properly connected to the USB port and to your device.
What should I do if all 4 LEDS are ashing?
If your powerbank is recharging, this is normal. If you see all 4 LEDs
ash for 10 seconds, the device connected draws more power than
the AMPMINI can give (max 1.0A) and the USB port will shut o.
Why are some LEDs solid and some ashing when I recharge the
AMPMINI?
The solid LEDs tell you how much the powerbank is currently
charged, while the ashing LEDs indicate how much is le to
charge. Your AMPMINI is fully charged when all 4 LEDs are solid.
Can I charge my device and the AMPMINI at the same time?
Yes! The AMPMINI has pass-through charging technology, which
means you can simultaneously charge your device alongside the
AMPMINI rather than charging each separately.
How many charge cycles do I get with the AMPMINI?
From empty to full, the AMPMINI is capable of recharging at least
500 times! Count on your myCharge to keep you going.
myCharge AMPMINI Manual
AMPMINI Manual
WARRANTY INFORMATION
We are dedicated to making the highest quality products possible.
In that, we provide a one-year limited warranty from the date of
purchase. Keep a copy of your purchase receipt as proof of
purchase and register your product at mycharge.com to activate
it and check for the latest product updates as they develop.
Failure to register your product and/or to provide proof of
purchase may void the warranty.
RFA Brands, LLC sells its products with the intent that they are free
of defects in manufacture and workmanship for a period of one
year from the date of original purchase, except as noted in our
policy. RFA Brands, LLC warrants that its products will be free of
defects in material and workmanship under normal use and
service. This warranty extends only to consumers and does not
extend to Retailers.
To obtain warranty service on your product, please visit
mycharge.com/pages/support
THANK YOU FOR CHOOSING MYCHARGE
>Click here for our warranty & legal information:
mycharge.com/pages/warranty
WARRANTY & LEGAL