MyWam Pegaz User manual

Operation and maintenance manual
Edition 4 of 2021-05-10
Special stroller Pegaz
Compact umbrella type stroller

PEGAZ edition 2/ 2021-05-10
2 | P a g e
ATTENTION! Users with sight, reading or cognitive
impairment are requested to report to the Manufacturer in
order to obtain information in the appropriate format.
Purpose of the Manual
The operation and maintenance manual contains basic information necessary for the correct use of the
Pegaz stroller, including the principles of safe use, description of its construction, operation and
adjustment, preparation of the stroller for operation, how to maintain and clean the stroller, and warranty
conditions.
It is designed for people who directly care of children with disabilities (childcare assistants, parents,
guardians), which will be transported in a stroller. It is also intended for doctors and physiotherapists
operating the stroller.
ATTENTION! Before using the stroller, each User is obliged to read the manual and act in accordance with
its guidelines.
This manual is an integral part of the product and must always be attached to the product wherever being
sold. Keep this manual for future reference! Keep the manual in an easily accessible place. The manual
in the electronic version is available on the website www.mywam.eu
ATTENTION! In the event of any medical incidents related to the presence of the Pegaz stroller, the
Manufacturer must be immediately notified in writing by contacting it via registered letter or e-mail with
acknowledgment of receipt.
Manufacturer's contact details:
● Postal address: MyWam sp.j., ul. Szczecińska 10, 41-516 Chorzów, Poland
● contact phone number: [phone]
● e-mail address: [email protected]
User and maintenance manual version: EN edition 2 / 2021-05-10
MyWam Kupiec, Bartold, Angres sp.j. reserves the right to make technical and commercial changes to the
content of the Operation and Maintenance Manual without prior notice. Each change will be determined
by the date the instructions were last updated .

PEGAZ edition 2/ 2021-05-10
3 | P a g e
Table of Contents
 Introduction ............................................................................................................................................ 5
1. Purpose of the Pegaz stroller ......................................................................................................... 5
2. Basic information about the Pegaz stroller .................................................................................... 5
3. Quick start ...................................................................................................................................... 6
 Safety ...................................................................................................................................................... 7
4. Important safety instructions and rules ......................................................................................... 7
5. Identification plate ......................................................................................................................... 8
6. Warning lables ................................................................................................................................ 8
7. Symbols designation ....................................................................................................................... 8
 Product ................................................................................................................................................... 9
8. General construction of the stroller ............................................................................................... 9
9. Configuration and use - stroller frame ......................................................................................... 10
Unfolding the stroller................................................................................................................ 10
Folding the stroller .................................................................................................................... 10
Front double wheels (solid wheels). Traveling direction lock function. .................................. 11
Rear double wheels (solid wheels). Independent brakes system. ........................................... 11
Amortisation system for all four double wheels ..................................................................... 11
Tilting foot ................................................................................................................................. 12
Adjustable ergonomic handles to push the stroller ................................................................. 12
Footrest. Regulation and use .................................................................................................... 12
Seat depth regulation. .............................................................................................................. 13
Backrest hight adjustment .................................................................................................... 13
Backrest tilt angle adjustment .............................................................................................. 14
10. Standard equipment ................................................................................................................. 15
Five points safety belts ......................................................................................................... 15
Transport lock ....................................................................................................................... 15
Safety barrier......................................................................................................................... 16
Shopping basket .................................................................................................................... 16
Wedge ................................................................................................................................... 16
Abduction and stabilizing belts ............................................................................................ 17
11. Additional equipment ............................................................................................................... 17
Adjustable canopy with window. .......................................................................................... 17
Therapeutic table .................................................................................................................. 18
Loin cushion .......................................................................................................................... 18
Headrest ................................................................................................................................ 18
Narrowing pads ..................................................................................................................... 18
Tourist bag ............................................................................................................................ 19
Raincover............................................................................................................................... 19
Mosquito net ......................................................................................................................... 19
Sleeping bag .......................................................................................................................... 19
Sunshade ............................................................................................................................... 19
12. Technical specification of Pegaz stroller ................................................................................... 21

PEGAZ edition 2/ 2021-05-10
4 | P a g e
Material composition of the stroller ..................................................................................... 21
13. Delivery and tools ..................................................................................................................... 21
14. Assembly and disassembly of the stroller ................................................................................ 22
15. Preparation for use ................................................................................................................... 23
16. Using the stroller ...................................................................................................................... 23
Carrying the stroller .............................................................................................................. 23
Getting on and off the stroller .............................................................................................. 23
Correct position in a stroller ................................................................................................. 24
Riding in a stroller ................................................................................................................. 24
Moving on slopes .................................................................................................................. 24
Overcoming thresholds or curbs ........................................................................................... 24
Transport in a car and other vehicles ................................................................................... 24
Cleaning and care .................................................................................................................. 25
17. Storage of the stroller ............................................................................................................... 25
Preparation of the stroller for long-term storage................................................................. 25
Corrosion protection ............................................................................................................. 25
18. Re-use ....................................................................................................................................... 26
19. Service and periodic inspections .............................................................................................. 26
20. Disposal ..................................................................................................................................... 27
21. Compliance with requirements for medical devices ................................................................ 28
22. Notes ......................................................................................................................................... 29
23. List of authorized service points ............................................................................................... 30
24. Warranty Card .......................................................................................................................... 31

PEGAZ edition 2/ 2021-05-10
5 | P a g e
 Introduction
Thank you for purchasing special Pegaz Special Stroller. We hope that it will be the cause of many
wonderful moments with your child and will be helpful every day. We make every effort to ensure that
our products meet your expectations and the highest standards. We encourage you to contact our
employees and follow us on our website www.mywam.eu and on social media. There you can find out
many interesting things about our products.
1. Purpose of the Pegaz stroller
"Pegaz" is a multifunctional stroller for disabled children. The stroller is based on a frame made of
aluminum and steel elements. Equipped with cushioned suspension of front and rear wheels, "Pegaz" is
a stroller for children and teenagers up to a weight of 40 kg. The product is equipped with a number of
accessories improving the functionality and comfort of use, such as: table, safety belts, wedge, hood,
mosquito net, sleeping bag, shopping bag, etc.
The "Pegaz" stroller is a medical device indicated for use by disabled children who, due to their health
condition, cannot walk or sit down on their own. The product is intended for the transport and movement
of the above persons in a sitting or lying position and for posture correction and this is its intended use.
Clinical indications include cerebral palsy, meningeal hernia, dystrophies, paresis, etc.
The product is intended for users 80-140cm height. Users cannot drive the stroller alone, but only with
the help of a guardian. The stroller can be used indoors and outdoors, on various surfaces (asphalt,
concrete, stone, gravel) and in various weather conditions. Any other use of the product than described
is forbidden. The product should be used in accordance with the recommendations of the attending
physician or physiotherapist. The stroller must be used together with the instructions for use only by
adults caring for the user. Young people and children as well as any other persons without proper training
should not use the product.
2. Basic information about the Pegaz stroller
The Pegaz stroller has many options, e.g.
 backrest tilt angle adjustment ……….……….….............
see point 9.11
 seat depth adjustment
………………………........................... see point 9.9
 backrest height adjustment – extensions……………..….
see point 9.10
 footrest adjustment…………………………………………….….
see point 9.8
 narrowing inserts …………………………………….…………....
see point
11.5
 additional equipment ……………………………………………..
see point
11

PEGAZ edition 2/ 2021-05-10
6 | P a g e
3. Quick start
The advantage of the Pegaz stroller is its ease of use and compactness. It can be prepared for use in a
few simple steps (Fig. 3.1):
Fig. 3.1

PEGAZ edition 2/ 2021-05-10
7 | P a g e
 Safety
4. Important safety instructions and rules
General tips:
 It is forbidden to use the stroller in a way for which the stroller is not dedicated.
 The product contains small parts that can be dangerous if swallowed by a child!
 Due to the large adjustment possibilities of the stroller, during the angular adjustment of the seat
and angular adjustment of the backrest, it is possible to set the position in which the child's head
is below the pelvic line. It is forbidden to use this position as it could lead to the risk of the child
choking.
 It is forbidden to put additional weight on the stroller, especially when it comes to placing an
additional weight on the back of the backrest, e.g. a backpack or a bag. This may cause the Pegza
stroller to tip over and injure the user! It does not apply to original accessories dedicated to the
Pegaz stroller that do not exceed the permissible load. All additional elements attached to the
stroller affect its stability.
 ATTENTION! Depending on the adjustments made for the Pegza stroller - it concerns the setting
of the stroller's push handle, backrest height adjustment, backrest angular adjustment, seat depth
adjustment, seat angle adjustment, footrest angle adjustment and footrest adjustment - this
stroller may exceed the recommended dimensions.
 ATTENTION! Each time the stroller is used, the steps listed below must be performed and the
stroller must not be used in the event of any irregularities. In such a situation, it is recommended
to urgently contact the Seller and the Manufacturer for advice.
 ATTENTION! When driving through doors or similar restrictions restricting the direction of travel
of the stroller, make sure that there is adequate space on both sides of the stroller to prevent
pinching of hands or other body parts and to prevent damage to the stroller.
ATTENTION!
 Never leave your child unattended in a stroller, as there is a risk of injury
and there is a risk of accident!
 This product is not suitable for running, skating or roller-skating
 This stroller is not intended as a seat in a motor vehicle
 Beware of gaps and moving parts – risk of jamming
 Do not carry the stroller with the child inside it
 The stroller is packed in a plastic bag. The plastic bag is not a toy and should
be kept away from infants and young children as it may cause suffocation
when put on a head.
ATTENTION! It is forbidden to use the stroller if the technical condition of the stroller or a single
element of the stroller is bad or the user has any doubts about it, the stroller is damaged or there
is a suspicion that damage has occurred or if the operation of the stroller is not correct. In such a
situation, it is recommended to urgently contact the Seller and the Manufacturer for advice.

PEGAZ edition 2/ 2021-05-10
8 | P a g e
5. Identification plate
 The identification plate contains basic information about
the product: name, model, serial number (ID no.),
maximum load, manufacture date, CE mark, warning
about proceeding in accordance with the Operation and
Maintenance Manual and manufacturer's data (see Fig.
5.1).
 The identification plate is located on the rear parts of the
intersecting of the frame
6. Warning lables
 The warning label contains important warnings for the
user (see Fig. 6.1).
 The warning lable is located on the rear parts of the
intersecting of the frame
7. Symbols designation
Product serial number The Manufacturer's name
Permitted total user weight
DESCRIPTION "WARNING!" and the
symbol in this manual are used to
enhance the reader's attention to the
content marked with this sign. Non-
compliance with content marked with
this description may endanger the health
and safety of the user and accompanying
persons, and may also damage the
product..
Date of manufacture
Conformity assessment
mark according to
applicable European
regulations and directives
Warning about proceeding
in accordance with the
product Operation and
Maintenance Manual
Fig. 5.1
Fig. 6.1

PEGAZ edition 2/ 2021-05-10
9 | P a g e
 Product
8. General construction of the stroller
The Pegaz stroller consists of one part - the frame with the backrest and the seat, which are its integral
part. Pegaz offers a wide range of accessories that help to meet individual needs of the users.
 Standard equipment
1- Ergonomic handles for pushing the stroller..... see point 9.7
2- Backrest height adjustment mechanism……... see point 9.10
3- Mechanism for adjusting the backrest angle.. see point 9.11
4- Transport lock …………………………………………….. see point 10.2
5- Upholstery
6- Shopping basket.............................................. see point 10.4
7- Independent brakes on the rear wheels………. see point 9.4
8- Four wheel
amortization
system …………….... see point 9.5
9- Front wheels direction locker ………………….…… see point 9.3
10- Set of 4 double solid gel wheels ………………..... see point 9.3 i 9.4
11- Adjustable, detachable footrest ………………... see point 9.8
12- Seat depth adjustment mechanism …..………… see point 9.9
13-
Abduction and stabilizing belts
……………. see point 10.6
14- Wedge ……………………………………………………... see point 10.5
15- Safety barrier ………………………………………………. see point 10.3
16-
Five points savety belts……………………...… see point 10.1
 Accessories
17- Tourist bag…………………………….….….
see point
11.6
18- Sleeping bag for legs………..……....….
see point
11.9
19- Narrowing inserts…………………....…..
see point
11.5
20- Headrest………………………………….……
see point
11.4
21- Sunshade………………………………….….
see point
11.10
22- Adjustable canopy with window …..
see point
11.1
23- Raincover…………………………………....
see point
11.7
24- Mosquito net……………………….……...
see point
11.8
25- Loin pad ………………………………………
see point
11.3
26- Therapy table…………………….………..
see point
11.2

PEGAZ edition 2/ 2021-05-10
10 | P a g e
9. Configuration and use - stroller frame
Unfolding the stroller
Before unfolding the Pegaz stroller, make sure that all four wheels are on the ground. In order to unfold
the stroller, you must first remove the transport lock located on the right side of the stroller. Then, holding
the push handles, lift the upper part of the backrest, while gently sliding the handles outward. The next
step is to loosen the stroller structure by lowering the struts (located at the front of the stroller at the
height of the shopping basket and at the back of the stroller behind the backrest. You should push them
down until they reach the horizontal position.
Folding the stroller
To assemble the stroller, first remove all accessories. Next, pull up the struts located between the front
wheels at the height of the shopping basket (Fig. 9.1.2) and at the back of the stroller behind the backrest
(Fig. 9.1.3). The next step is to push the handles inwards (Fig. 9.1.4) and to push simultaneously the upper
part of the stroller forward and down (Fig. 9.1.5). This results in the folding of the stroller. To secure it,
fasten the transport lock (Fig. 9.1.6) located on the right side of the stroller.
Fig. 9.2.1 Fig. 9.2.2 Fig. 9.2.3
Basic position of the strut Raising the lower strut Raising the upper strut
Fig. 9.2.4 Fig. 9.2.5 Fig. 9.2.6
Pushing handles inwards Folding the stroller Closing transport lock
transportowej

PEGAZ edition 2/ 2021-05-10
11 | P a g e
Front double wheels (solid wheels). Traveling direction lock function.
The front wheels are an integral part of the frame and can be removed for replacement.
 Direction lock function. In the event of uneven surfaces, moving on sloping surfaces, when
crossing thresholds or curbs, it is recommended to install the lock and block the turning of the
front wheels. In order to block the steering function of the front wheels, the button between the
front wheels should be raised (Fig. 9.3.1). To re-enable the steering wheel turning function, push
it down (Fig. 9.3.2) and place the lock in the slot.
Fig. 9.3.1 Fig. 9.3.2
Direction block on Direction block off
Rear double wheels (solid wheels). Independent brakes system.
The rear wheels are an integral part of the frame and can be removed for replacement.
 Independent brakes system. The rear wheels are equipped with two independent brakes located
behind each wheel. To apply each brake press both pedals down (Fig. 9.4.1). To unblock the brakes,
pull both pedals up (Fig. 9.4.2).
Amortisation system for all four double wheels
All four wheels of the Pegaz stroller are equipped with an amortisation system. It works automatically and
should not be modified by the user (Fig. 9.5).
Fig. 9.4.1 Fig. 9.4.2
Wheel brake on Wheel brake off
Fig. 9.5.
Amortisation system

PEGAZ edition 2/ 2021-05-10
12 | P a g e
Tilting foot
The Pegaz stroller can be equipped with a tilting foot included in the
additional equipment. The tilting foot makes it easy to maneuver the
stroller when it encounters small obstacles, e.g. stairs, curbs. To raise the
front wheels, press the tilting foot pedal and pull both handles toward
you.
Adjustable ergonomic handles to push
the stroller
The Pegaz stroller is equipped with adjustable
push handles. In order to change their angle,
press the buttons located at their ends and
rotate to change their angle of inclination (Fig.
9.7.1 and 9.7.2). After placing both handles in a
suitable position, release the pressure. The
handles can change position every 90 degrees.
Footrest. Regulation and use
 Installation. To mount the footrest, slide it onto the mounting pins located at the bottom of the
frame at several height levels. A click sounds when the fastening hooks come into place. After mounting
the footrest, make sure that it is properly attached. To check this, pull the footrest vigorously up - it should
stay at the same position.
 Disassembly. To remove the footrest, press the two release buttons placed on the sides of the
footrest at the same time and lift the footrest.
The stroller can not be used without a footrest.
 Use of a footrest. It is recommended to
adjust the footrest plate properly. Child's feets
should rest freely on it with its entire surface.
Also child’s thighs should lie parallel to the seat
surface (Fig. 9.8.1 and 9.8.2). There are straps in
the footrest plate to secure the child's feet. It is
recommended to put them on when using the
stroller. The footrest plate is placed in a
horizontal position as standard. However,
during transport, storage, rehabilitation, getting
on and off the Pegaz stroller, the footplate must be removed.
Fig. 9.6.
Tilting foot
Fig.9.7.1 Fig. 9.7.2
Handle to push – position a Handle to push – position b
Fig. 9.8.1 Fig. 9.8.2
Minimal position Maximal position

PEGAZ edition 2/ 2021-05-10
13 | P a g e
Seat depth regulation.
Pegaz stroller has the function of adjusting the seat depth. Thanks to the possibility of unfolding its front
part, we can extend the seating area by 5cm. To do this, press both buttons located on the sides of the
front part of the seat simultaneously and bend the adjustable element to obtain the position of the
main part of the seat (Fig. 9.9.1). To fold the seat, press the buttons located on the sides of the front
part of the seat simultaneously and fold the adjustable element down or under the main part of the seat
(Fig. 9.9.2).
Backrest hight adjustment
The Pegaz stroller has the function of adjusting the backrest height (Fig. 9.10.1). Thanks to the option of
installing metal extensions to the upper part of the backrest, we can extend the backrest by 10cm. To do
this, detach the upper part of the backrest upholstery, insert the extension into the holes of the backrest
tubes and fasten the upper part of the upholstery again (Fig. 9.10.2).
Fig. 9.10.1 Fig. 9.10.2
Backrest hight regulation max / min Extensions
Fig. 9.9.1
Seat depth regulation – minimal position
Fig 9.9.2
Seat depth regulation – maximal position

PEGAZ edition 2/ 2021-05-10
14 | P a g e
Backrest tilt angle adjustment
The Pegaz stroller has the function of a two-stage regulation of the backrest angle (Fig. 10.11.1 and
10.11.2). To adjust it, release the strut located directly behind the backrest by lifting it up (Fig. 10.11.3),
move down the backrest mounts located on the sides of the frame and tilt the backrest from the basic
position to the reclined position (Fig. 10.11.4). In order to lock the deflected position, the strut should be
locked again by lowering it down and pressing it properly (Fig. 10.11.5).
Fig. 10.11.3
Release of the spreader
Fig. 10.11.1
Backrest tilt angle regulation – basic position
Fig. 10.11.2
Backrest tilt angle regulation – modified position
Fig. 10.11.4
Lowering mounts
Fig. 10.11.5
Locking the spreader

PEGAZ edition 2/ 2021-05-10
15 | P a g e
10. Standard equipment
Five points safety belts
The Pegaz stroller comes standard with professional, five-point adjustable seat belts (Fig. 10.1.1).
 Adjustment. Adjust the five-point belts to your child before attaching them. To adjust the length of
the straps, move the adjusters on the straps up or down and move the protectors (Fig. 10.1.1 and
10.1.2) accordingly. To adjust the height of the attachment of straps to the backrest, the harness
attachment should be moved from the low attachment to the high attachment or conversely.
 Use. To attach a five-point harness to your child, put the harness on the right and left child’s arm
and then attach both harnesses to the belt buckle that is fastened on the seat. To remove the five-point
belts from your child, press the button,on the buckle and remove both braces from the buckle, then
slowly remove these braces from the right and left child’s arm. Each time you change the angle of the
backrest, you need to readjust the belts lenght.
Transport lock
The stroller is equipped with a transport lock, which serves to
protect the folded (closed) stroller frame against its automatic
opening during transport and storage. (Fig. 10.2). The transport lock
must be attached after folding the frame and removed before
unfolding the frame. Do not extend the stroller frame if the lock on
the frame, as this may damage the the structure of the frame
construction.
Fig. 10.1.1 Fig. 10.1.2
Safety belts adjustment – minimum Safety belts adjustment - maximum
Fig. 10.2
Transport lock

PEGAZ edition 2/ 2021-05-10
16 | P a g e
Safety barrier
As standard equipment, the Pegaz stroller has a safety barrier
that is designed to prevent a child from falling out of the stroller
(Fig. 10.3). The safety barrier is used alternately with a
therapeutic table (included in the additional accessories set) and
is a structural element of the stroller.
 Installation. The element should be mounted on the stroller
frame by using plastic latches, which look the same on both ends.
After applying both latches at the appropriate height, press the
them so that they completely cover the frame.
WARNING! Due to structural reasons, the stroller must have a
footrest and a safety barrier or therapeutic table on.
Shopping basket
The shopping basket is part of the standard equipment of the
Pegaz stroller (Fig. 10.4). It's right under the seat. Its maximum
load capacity is 2kg.2kg.
Wedge
The stroller is equipped with a wedge, which should be placed
between the child's thights after placing the child in the stroller.
To install the wedge, attach it with Velcro on the front or back of
the apron (Fig. 10.5.1 and 10.5.2) and then wrap it with a band to strengthen it.
Fig. 10.5.1 Fig. 10.5.2
Wedge – position maximal Wedge – position minimal
Fig. 10.3
Safety barrier
Fig. 10.4
Shopping basket

PEGAZ edition 2/ 2021-05-10
17 | P a g e
Abduction and stabilizing belts
Abduction and stabilizing belts are used for additional pelvis
stabilization and prevent the child from slipping out of the stroller
(Fig. 10.6). The correct way to use them is to wrap the child's thighs
so that his pelvis adheres as close as possible to the backrest. This
helps keep a healthier and more comfortable position of the child in
the stroller.
 Adjustment. To adjust the length of the support belt, you must
move the adjusters on the front belt straps up or down.
 Use. To put on abduction and stabilizing belts the child should
be seated on the fitted straps, then wrap the child's leg and belt
buckles fasten both to the front of the two tapes. In order to
remove abduction and stabilizing belts, unfasten the belt buckles of
the two front straps.
11. Additional equipment
Adjustable canopy with window.
The Pegaz stroller can be equipped with an adjustable canopy with
window, that helps protect the child from the sun or rain (Fig.
11.1.1). The elements of the booth are: frame (front and rear arch),
sunroof adjustment mechanism (right and left), two snaps with red
buttons fastening the roof to the frame, roof upholstery, and a
window with a mosquito net with a zipper.
 Installation. The fastening element for the adjustable hood
with the window are two plastic elements located on the outer
sides of the upper part of the frame at the height of the
headrest.,To assemble the adjustable canopy with the window, set
the backrest to the upright position, and then simultaneously slide
both visor latches to the frame mounts. Mount the booth with the
window in such a way that the back part of the booth's upholstery
overlaps the back of the stroller.
 Disassembly. To disassemble the adjustable canopy with window, press the two red buttons on the
canopy fastening latches, then slide the booth fasteners out of the mounts on the frame.
 Use. In order to change the size of the booth's window area, hold the front arch and the rear arch of
the booth's frame and bring the arches closer or closer to each other to set the desired position. The
mechanism adjusting the size of the booth's surface locks automatically. The booth has a removable
window with a mosquito net, ensuring free air circulation. The window opens and closes with a zipper.
Fig. 11.1.1
Adjustable canopy with window
Fig. 10.6
Abduction and stabilizing belts

PEGAZ edition 2/ 2021-05-10
18 | P a g e
Therapeutic table
The Pegaz stroller can be equipped with a non-slip therapeutic table with a
maximum load of 3 kg (Fig. 11.2). To assemble the table, slide the open
fastening clamps onto the main element of the frame, and then tighten the
clamps until they are completely closed. Make sure it is securely attached
by pulling it vigorously - the table should remain in place. To disassemble
the table, unfasten the clamping clamps and remove the table from the
stroller frame.
The therapy table is used alternately with a safety barrier and is an essential
structural element of the stroller.
WARNING! For structural reasons, the stroller must have a footrest and a
railing or therapeutic table.
Loin cushion
The loin cushion is an additional piece of equipment that increases the comfort of using the stroller by
softening the backrest in the lumbar section (Fig. 11.3). The cushion is installed by attaching it to the back
with velcro.
Headrest
The headrest is an element of optional equipment (Fig. 11.4). It performs both softening and stabilizing
functions. To adjust the height of the headrest, attach the it with velcro at the correct height of the
backrest. Then, for better stability, drag the headrest straps fitted with velcro through the backrest
openings and attach them behind the backrest.
Narrowing pads
The Pegaz stroller is equipped with two narrowing inserts. They are used to adjust the inside dimensions
of the seat width (Fig. 11.5). The inserts are mounted by attaching them with the longest vertical edge of
the pad to the outer edges of the backrest and to the side elements of the stroller frame using a velcro
strap
Fig. 11.2
Therapeutic table
Fig. 11.3 Fig. 11.4 Fig. 11.5
Loin cushion Headrest Narrowing pads

PEGAZ edition 2/ 2021-05-10
19 | P a g e
Tourist bag
The large and elegant travel bag is mounted on two handles,
located on the inside of the handle to push the stroller (Fig. 11.6).
The maximum bag load is 2kg.
WARNING! Exceeding the maximum bag load has a negative
effect on the stability of the stroller and there is a danger for the
child and other people!
Raincover
The Pegaz stroller can be equipped with a raincover that helps
protect the child from moisture (Fig. 11.7). This optional
equipment requires to be installed to other optional equipment
- an adjustable canopy with window.
Assembly. To install the raincover, put it on top of the entire adjustable canopy with window, and then
cover the seat and footrest. After making sure that the foil is applied properly, attach it to the frame and
footrest - depending on the location of the fastener.
Mosquito net
The Pegaz stroller can be equipped with a mosquito net, which prevents insects from coming into direct
contact with the child (Fig. 11.8). This accessory requires to be installed to another accessory - an
adjustable canopy with window.
Assembly. To install the mosquito net, put it on top of the entire adjustable hood with window, and then
cover the stroller seat and footrest with a net. After making sure that the net is applied properly, attach
it to the frame and footrest - depending on the location of the fastener.
Sleeping bag
The Pegaz stroller can be equipped with a sleeping bag for legs, increasing the child's comfort during
colder days (Fig.11.9). This piece of equipment requires to be installed to the safety barrier.
Assembly. In order to mount the sleeping bag, put it on the footrest from below, and attach it from above
through the safety barier. Then fasten it with snaps to the frame of the stroller.
Sunshade
The Pegaz stroller can be equipped with an umbrella that helps protect the child from the sun (Fig. 11.10).
Assembly. To install the umbrella to the stroller, loosen the clamp by unscrewing the thread located on
the side, then slide it on, ensuring that the rubber washer remains in place. After choosing the desired
height, tighten the thread until the clamp on the stroller frame is fixed properly.
Fig. 11.6
Tourist bag

PEGAZ edition 2/ 2021-05-10
20 | P a g e
Fig. 11.8
Mosquito net
Fig. 11.7
Raincover
Fig. 11.9
Sleeping bag
Fig. 11.10
Sunshade