Nanoleaf NL48-5003TW-5PK User manual

Smarter by Design
Nanoleaf Shapes
Mini Triangles I Smarter Kit
Quick Start Guide
® Guide de demarrage rapide ® Guia de inicio r6pido

Light
Panels
Linkers
□
0
Mounting
Plates
\'-_-JI Controller
- ~ --
-~ ~ -
S Ap~ a st~;~
~ GET IT ON
~ Google Play
- - - -- --
- - ~~
Mounting
Tape
P ower
Supply

User Manual & Warranty Registration
nanoleaf. me / myshapes
0

Important Installation Tips
u 1x + lJ 42W
\ 7
ix
lJ soow
Make sure you hove enough PSUs for your layout NOTE: Each standard PSU
supports up to 42W and each Controller supports up to 500 panels. Use our PSU
calculator at nanoleaf.me/myshapes.
~
~3~s
When mounting, apply strong
pressure to the center of the panel
for 30 seconds.
•
The Controller and Power
Supply con be connected to any
panel in your setup.
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil.
Tape is NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).

.
, .
, .
, .
\----.,•:-- --:~
' ' ' ,
' , ' ,
I I I I
·----•--.--
•
•
•
I
I
I
I
,. , Nonoleof App
~ Layout Assistant
-----------'
,

+
r7J\
~3~s

User Manual & Warranty Registration
nanoleaf . me / myshapes
G

0
J

@ WARNINGS & CAUTIONS Please read this safety informationcarefully and keep this document for future reference. Helparticles and
customer support is always ovoiloble at https:/ / helpdesk.nonoleof.me. This Nonoleof • product is not designed, certified, nor intended for
use in: enclosed locations thot limit the flow of air and /or trap heat which contributes to on environment temperature over 40 degrees
Celsius; emergency exits, emergency lighting, or other use cosesinvolving critical systems for human safety; in conjunction with 3rd party
devices thot ore not approved by Nonoleof <• for use with Nonoleof• products; locations or use coses where there is a risk of electric shock;
outdoor oreos, regardless of weather cond1t1ons; wet or domp conditions; as o floor covering or floor tiling; excessively hot environments
that ore consistently above 40 degrees Celsius for extended periods of time (for example near ovens, space heaters, clothing dryers);
excessively humid oreos; regions or countries other thon that in which the product was intended for and certified for solein. When using this
Nonoleof'• products, do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. While
connected to the electrical supply of the building, line voltages will be present in the power supply, panels, linkers, so do not place any
metallic or conductive obJects neor any exposed metal contacts on ony component .Unplug the power supply unit from the power source
before dismounting light panels. Do not allow small children to operate this device without adult supervision. This device contains small
ports thot moy be o choking hazard to small children. Loose or dangling cords may cause on entanglement hazard to small children Do not
leave cords dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it 1s
connected to power . Cleon the panels with o soft dry cloth, and do not use harsh cleaning agents. Do not step on any port of the device, os
this will cause breokoge . Do not submerge ony port of the device in water, or expose ony port of the device to water Do not bend or flex
the panels with the connector still attached, as this will cause breakage. Do not attach the panels together with any connector or device
other than original equipment manufactured by NanoleofRJ Do not puncture any port of the device wtth sharp objects, os this will cause the
device to cease working as designed and may presenta safety hazard If adhesive tope is a component of this product, please note that 1t
1s not designed to be used with brick wall, wallpaper, uneven/ textured surfaces, or highly poroussurfaces. Do not use double sided tape to
attach any port of the device to a ceiling or surface greater than 90 degrees relative to the floor, os the device will eventually foll
down-creating a safety hazard and risk of damage to the device . Optional secure screw mounting solutions for these use cases ore
available, sometimes through added accessories offered for purchase separately. Your warranty DOES NOT COVER damage caused by
falling devices. The flexible coble and power supply cannot be replaced by another third party product. If the coble 1s damaged the entire
controller ond power supplyshould only be replaced with original equipment manufactured by Nanoleotr•. Using any non-approved
replacement component will void the warranty and moy presento serious safety hozord. Nonoleaf r• light panels ore primarily intended for
decorative use, with RGBW output function that con dim .
WI-Fl/RF This equipment hos been tested and found to comply with the limits of a Closs B d1g1tol device, pursuant to port 15 of the FCC
Rules ond the Conodion ICES - 003 Closs B specifications. These limits ore designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and con radiate radio frequency energy ond, 1f not installed ond
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee thot
interference will not occur in o particular installation. If this equipment does cause harmful interference to radio or television reception, which

con be determined by turning the equipment oft and on, the user Is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna . Increase the separation between the equipment and receiver. Connect the
equipment into on outlet on o circuit different from that to which the receiver is connected . Consult the dealer or on experienced radio / TV
technician or visit www .nonoleof.me/ support.
FREQUENCY RANGE
2.4GHz Wi- Fi: 2412 -2462 MHz, Mox RF e.i.r.p power< 20 dBm
2.4GHz Radio: 2402-2480 MHz, Mox RF e.i.r.p power<10 dBm
NFC . 13.56MHz, Mox RF e.,.r.p power 0 dBm
CE INFORMATION The external flexible coble or cord of thisluminoire cannot be replaced; if the cord Is damaged, the luminoire shall be
destroyed. The light source contained in thislumino1re shall only be replaced by the manufacturer or this seNice agent or a similar qualified
person. NonoGrid limited (Nanoleof) hereby declares that this device is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/ EU . The declaration of conformity is ovoiloble at www.nonoleof . me / eudoc / .
WARRANTY INFORMATION This product Is covered by a limited warranty from Nanaleaf ,• 1: o two-year complimentary replacement of
defective hardware. For full details visit: nanoleaf.me/ warranty .

Nanoleaf Canada
# 400 -100 Front Street East
Toronto, ON
Ms.A 1E1 , Canada
Nanol•af Europ. SAS
10 Rue du Coprtoine Ferber
92130 lssy-les-Moulineoux
Fronce
Manufacturer
NonoGr id Limited
Still Need Help?
nanoleaf.me/ support
@ Besoin d'o1de? nonoleof.me/support
@) lAun neces,to oyudo? nonoleof.me/support
Model1:
NL48-5003TW-SPK
NL48-S00S TW -SPK
NL48-5017TW-SPK
FCC ID : 2AEWY-NL42
IC: 20489 NL42
Po_,Supply Spec:1 :
Input Voltage: 100 240V~S0/60Hz
Mox Power: 42W
11 1301-483A Castle Peale Rood.
Kowloon, Hong Kong Communication Protocol.
Wi-Fi (2.4GHz b/g/n); 2.4GHz proprietary CE

CJ DJ liJ @nanoleaf a II @thenanoleaf
nanoleaf.me

~ 7794
~ 4394
S2041 0HC853
Need More Ide ?
nanole f . as•
a .me/inspir ation
/
10S
Android