Nanoleaf Skylight User manual

Quick Start Guide
Nanoleaf Skylight
Smart Modular Ceiling Light

Nanoleaf Skylight |Page 1
Read these instructions carefully and keep them for future
reference. Refer to What’s in the Box section for guidance,
and ensure you have all required parts before starting.
When installing, place all parts on a soft, clean, flat surface
such as a carpet to prevent scratches. If you’re having
diculty, please reach out to our friendly Customer Care
team for help at go.nanoleaf.me/support.
•Installation should be performed by an individual
with previous electrical experience.
•Consultation with a professional electrician is
recommended for the installation of this product.
•Keep parts away from children.
Overview
Time
Professional
Electrician
Tools
1 hour
Still Need Help?
Visit go.nanoleaf.me/myskylight for more detailed instructions.
Ø6mm

Nanoleaf Skylight |Page 2
Ensure you have all the required parts before starting. If items are missing or damaged, please reach out
to our Customer Care Team at go.nanoleaf.me/support.
What’s in the Box
EMounting Screw
DCeiling Plate Screw
FDrywall Anchor
GPlaster Anchor
HBinding Post
CWingNut (Attached)
JCommunication Linker
KPower Wire
LMain Controller Power Wire
AMain Controller Panel
BExpansion Panel
Smarter Kit
EMounting Screw
FDrywall Anchor
GPlaster Anchor
JCommunication Linker
KPower Wire
BExpansion Panel
Expansion Pack

1. Turn the circuit power and the light switch o before you start.
2. To open the Main Controller Panel (A)
A. Pull the clear tape on the panel.
B. Insert a flat head screwdriver into one of the small notches along the seam. Slightly twist the screwdriver.
Step 1: Mount the Main Controller Panel
•Before you start, turn o the power of your main circuit.
•Plan out your layout. Align and mark the panels of your desired layout on the ceiling.
Nanoleaf Skylight |Page 3
12
B. Insert & Twist
A. Pull Tape
OFF OFFOFF
A

Nanoleaf Skylight |Page 4
1. Remove the L Shape Cover to reveal the terminal block for wiring.
Step 1: Mount the Main Controller Panel (cont.)
2
A A

Step 1: Mount the Main Controller Panel (cont.)
1. Remove the Ceiling Plate by unscrewing the Wing Nuts (C).
3
Nanoleaf Skylight |Page 5
C
C
A

D
1. If mounting with the Ceiling Plate, ensure that
the wires are positioned through the hole of the
plate with a suitable length visible.
2. Fasten the Ceiling Plate so that it is parallel to
your desired panel alignment.
1. The Main Controller Power Wires (L) attached to
the Main Controller Panel (A) can be connected
with junction box wires using the included
Binding Posts (H).
A. Black = Live
B. White = Neutral
2. Make sure the wires are secure and connected to
the corresponding wires.
Black = Live
18AWG Input Wire
6-8 mm
White = Neutral
18AWG Input Wire
45
Nanoleaf Skylight |Page 6
Step 1: Mount the Main Controller Panel (cont.)
D
H
L

Step 1: Mount the Main Controller Panel (cont.)
1. Use the electric drill (Ø6mm) to break through the
four knockout holes.
2. Positioning the Main Controller Panel (A) at the
desired ceiling location and hold it against the
ceiling.
3. Take a pencil and mark each screw hole on the
ceiling.
1
6
Nanoleaf Skylight |Page 7
1
7
8

Nanoleaf Skylight |Page 8
Step 1: Mount the Main Controller Panel (cont.)
1. Now align and mount the Main Controller Panel (A) back to the Ceiling Plate.
2. Make sure the wires have passed through the Ceiling Plate and that the Main Controller Panel (A) sits secure and
flat on the plate.
3. Secure the Ceiling Plate with the Wing Nuts (C).
9
C
C
A

Nanoleaf Skylight |Page 9
Step 1: Mount Main Controller Panel (cont.)
10
Ø6mm
Option A
(Drywall)
Option B
(Plaster)
1. Using the provided anchors and screws, mount your Main Controller Panel in place with the four knockout holes in the
corner of each panel.
2. To mount the panel in place you can use:
A. Drywall Anchors (F)
I. Screw in the four Drywall Anchors (F) to the four spots you marked prior, OR
B. Plaster Anchors (G)
I. Drill a hole of 6mm (OD) then drive the Mounting Screw (E) into the Plaster Anchor (G).
*Dierent mounting hardware will be required for installation on structural wood, concrete, and porous masonry surfaces. The correct items are
widely available at hardware and home improvement stores.
F
G
E