Naomi Home Amy Office Cabinet User manual

Page 1 of 11
NAOMI
Naomi Home Amy Office Cabinet
HOME
Product Dimensions:
30.71”L×15.75”D×26.38”H
Assembly Instructions
Please take a moment to read through the entire instruction booklet before assembly to
familiarize yourself with this product. Once you feel ready to start, follow the instructions
step by step and this should make this process as easy as we could make it for you.
If you need help or have damaged or missing parts, contact customer service at
www.NaomiHome.com.
©
2020 Naomi Home, Inc. - All Rights Reserved.

Page 2 of 11
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD
•
USE, MAINTENANCE & ASSEMBLY
PARENTAL SUPERVISION IS REQUIRED
WARNING CAUTION
SAFETY WARNINGS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This product includes small parts, sharp points and sharp edges in its unassembled state.
Keep unassembled parts away from children under 3 years of age, and animals.
Follow the information on the warnings appearing on table and on the
carton. Do not remove warning label from cabinet.
Do not allow children under 3 years of age to use the cabinet.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Parents or Guardians should supervise use under the intended age specifically regarding
children that may have access to it and climb on the unit.
Do not allow horseplay on, under, or behind the unit and prohibit jumping on the cabinet.
If used improperly, your table may be pulled over or fall, creating risk of injury or
damage. Children should not be permitted to climb or pull on the cabinet.
Periodically check and ensure that the components are in their proper position, free from
damage, and that all connectors are tight.
Use on level surfaces only. Assemble on a soft level surface to avoid damage to unit or floor.
Do not use this item if any components are missing or damaged.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Only clean using damp cloth and mild detergent, do not use bleach or abrasive cleaners.
Check you have all components and tools listed on page 4
Do not stand or put weight on this product during assembly, this could cause damage.
Remove all hardware from the plastic bags and separate them into groups.
Assemble the item as close to its final position (in the same room) as possible.
Certain assembly steps may be easier with 2 people.
Dispose of all packaging carefully and responsibly.
We do not recommend power screwdrivers. Only use hand screwdrivers to prevent
damage to unit.
•
Enfants morts suite au basculement d’un meuble.
Afin de limiter le risque de basculement de meuble:
TOUJOURS utiliser les fixations anti-basculement.
NE JAMAIS installer de TV sur ce produit.
NE JAMAIS laisser d’enfants se tenir debout sur les tiroirs,
portes ou etageres, y grimper ou s’y suspendre.
NE JAMAIS ouvrir plus d’un tiroir a la fois.
TOUJOURS placer les choses les plus lourdes dans les tiroirs du bas.
Han muerto ninos por el vuelco de meubles.
Para limitar el riesgo de vuelco de los meubles:
Utilisar SIEMPRE las fijaciones antivuelco que suministran.
NUNCA instalar un TV sobre este producto.
NUNCA permitar que los ninos se pongan de pie, trepen o
se cuelguen de los cajones, puertas o baldas.
NUNCA abrir mas de un cajon a la vez.
Colocar los objetos mas pesados en los cajones inferiores.
•
•
•
•
•
•
•
•
•
•
!
FURNITURE TIP-OVER HAZARD
•
•
•
•
•
Children have died from furniture tip-over
To reduce the risk of furniture tip-over:
ALWAYS install tip-over restraint especially if used by a wall or in the open.
NEVER put a TV on this product
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
NEVER open more than one drawer at a time.
ALWAYS place heaviest items in lowest cabinet.
Keep these instructions for future reference.
•

Page 3 of 11
This drawing is to give you an overall idea only of how this assembly will go together
and does not replace the assembly instructions.
Please take a moment to read through the whole instruction booklet before assembly to familiarize
yourself with this product. Once you feel ready to start, follow the instructions step by step and this should
make this process as easy as we could make it for you.
ASSEMBLY AT A GLANCE
1
2
3
4
5
6
8
9
10
11
12
13
14
7

COMPONENT PARTS
Please check that you have all the parts listed below
Rear Wheel×2 Front Wheel×2 Screw
ASSEMBLY HARDWARE
ABCDE
FGHIJ
K
Page 4 of 11
Screw ×76
Screw ×26 ×12
Drawer Slide
×10
Drawer Slide
×2
Cam Bolt
×20
Wood Dowel
Pin
×16
1. Top Panel ×1
2. Left Side Panel×1
3. Right Side Panel×1
4. Bottom Panel×1
5. Support Side Panel×1
6. Front Door×1
7. Middle Support Panel×1
8. Left Back Side Panel×1
9. Right Back Side Panel×1
10. Drawer Front ×5
11. Drawer Bottom ×5
12. Drawer Back ×5
13. Drawer Left ×5
14. Drawer Right ×5
×20Cam Lock
Tools RequiredTools Required
Phillips Screwdriver
(Medium) (not included)
*Do Not Use Power
Screwdriver or Drill.
Hex Screwdriver
(included)
1
2
3
4
5
6
8
9
10
11
12
13
14
7
Drawer Door Lock×2

7
G
G
12
13
13
14
G
G
3
AA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
ASSEMBLY INSTRUCTIONS
2
1
Select A×30 and 3×1,
7×1. Position 7 in the left,
position 3 in the right. Insert
A×5 into the one side of the
B, other A×5 into the middle
of the B, other A×5 into the
other side of the B.Insert B×5
into the 7.Repeat the steps
for the 3.
Select 12×5,13×5,14×5, and
G×20. Insert G×2 into the
hole of the 13 into the 12.Re-
peat the steps for 14 and 12.
Repeat the steps for another
Drawer panels×4.
A
A
A
A
Page 5 of 11
A
A
BB
B
B
B
B
B
B
B
B
A
A
A
A
A
A

12
11
11
10
10
13
14
A
A
A
C
C
A
A
A
D
D
F
F
E
E
Page 6 of 11
ASSEMBLY INSTRUCTIONS
4
3
Select 10×5 ,11×5 , D×10,
E×10, F×10. Install the 11
along the grooves on the
both sides of the 13 and 14.
Install the 10 on the 13 with
the D, E and F. Repeat the
steps for the 10 and the 14.
Repeat for another Draw-
er×4.
Select A × 30, C×2. Insert A×3
into the C into the 11 tightly.
Repeat the steps for the
other side of the 11.Repeat
the steps for the other
Drawer ×4.

2
2
5
7
3
4
5
7
D
F
F
E
E
G
G
G
G
G
E
E
E
D
D
D
Page 7 of 11
ASSEMBLY INSTRUCTIONS
6
5
Select 2,5,7,D×4, E×4,F×2.
Insert D×2 into the 2 into the
two sides of the 5 with the
F×2. Insert the E×2 into the 2
into the middle holes of the
5.Repeat for the 5 and the 7.
Select 2,3,4,5,7,E×6,G×6.
Insert the 4 into the 2,the
7,the 3 with the E×6. Insert
the G ×6 into the 4 into the
2,the 7 and the 3 tightly.
F
G

2
1
4
3
7
8
9
H
I
I
A
A
A
A
H
E
F
F
F
F
F
D
D
D
D
D
D
Page 8 of 11
ASSEMBLY INSTRUCTIONS
8
7
Select the 1,the 2,the 3,the
8,the 9, D×6,E×6,F×6.
Install the 8 along the
grooves of the 2 and the
7.Repeat for the 9,the 3 and
the 7. Insert the 1 into the
2,the 7,the 3 with the
D×6,the E×6,the F×6.
Select the 4×1,the H×2, the
I×2,the A×16.
Put the cabinet upside down,
insert the H×2 into the 4 with
the A×8 tightly. Repeat for
the I×2.
E
E
F
I

J
J
K
K
6
6
Page 9 of 11
ASSEMBLY INSTRUCTIONS
10
9
Select the 6,J×4.
Insert one of the K into the 6
with J×2.Repeat for the other
K.
Insert the K×2 into the 6 and
2. Insert the J×8 into the hole
of the K with the Phillips
Screwdriver like picture.
J
J
J
2
G
2
2
KK
K

Page 10 of 11
ASSEMBLY INSTRUCTIONS
11
Put the Drawers ×5 into the
Cabinet.
10

ASSEMBLY COMPLETE
Page 11 of 11
www.NaomiHome.com
MADE IN CHINA
Product Packaging Information
Model #:
Color:
Shipment Ref. #:
Date:
________________________________
__________________________________
_________________________
__________________________________
A A YCONGR TUL TIONS, OUR NAOMI HOME AMY OFFICE
CABINET IS COMPLETE!
NAOMI
H O M E