Naomi Home Brisbane Glider and Ottoman User manual

Brisbane Glider and Ottoman
WARNING
CAUTION
?ADULT ASSEMBLY REQUIRED.
?CHOKING HAZARD. This product includes small parts, sharp points and sharp edges in its
unassembled state. Keep unassembled parts away from children under 3 years of age.
USE AND MAINTENANCE:
?Use on level surfaces only!
?Because this product needs assembly, it is prone to working itself loose from time to time depending
on the use. Please take the time to check that all connections are still tight and working properly for
the safety and enjoyment of you and your child.
PRN: AIM-125-2070-NAI [13.10.01]
Page 01 of 08
FRONT

OTTOMAN COMPONENT PARTS
11
Short Dowels (x2)
12
Long Dowels (x2)
10
Left/Right Frames (x2)
Right
Left
LEFT FRAME
GLIDER COMPONENT PARTS
ASSEMBLY HARDWARE
Note : Use a Phillips Screw-Driver for assembly (not included).
Please check to see if you have all the parts and components listed here. If you are missing any parts
please STOP and contact our customer service staff at
www.NaomiHome.com
Page 02 of 08
1
Back Rest (x1)
7
Back Cushion (x1)
5
Short Dowels (x4)
6
Long Dowels (x2)
8
Seat Cushion (x1)
9
Left/Right Arm Cushions (x2)
35mm Allen Head Bolts (x34)
A
D
Allen Key (x1)
50mm Allen Head Bolts (x2)
B
C
Barrel Nuts (x2)
3
Seat Support (x1)
FRONT
4
Left/Right Frames (x2)
Right
Left
2
Left/Right Arms (x2)
Left
Right
LEFT ARM
LEFT FRAME
13
Cushion (x1)

Page 03 of 08
1
2
OTTOMAN ASSEMBLY INSTRUCTIONS
A
LEFT FRAME
Sticker
LEFT FRAME
12
11
11
12
A
A
A
D
Hardware needed: 35mm Allen Head bolts (x4)
A
10
11
11
A
10
12
2a
D
10
RIGHT FRAME
2a
A
A
D
Hardware needed: 35mm Allen Head bolts (x4)
A
10

Page 04 of 08
3
4
OTTOMAN ASSEMBLY INSTRUCTIONS
Ottoman Assembly Complete!
Turn the ottoman base assembly up side down with feet in the air.
A
13
10
D
13
Hardware needed: 35mm Allen Head bolts (x4)
A
Turn the ottoman base assembly over onto its feet.

Page 05 of 08
GLIDER ASSEMBLY INSTRUCTIONS
5
4
LEFT FRAME
LEFT FRAME
Sticker
A
5
5
5
A
A
AD
4
LEFT FRAME
6
6
5
7
7a
44
LEFT FRAME
6
Hardware needed: 35mm Allen Head bolts (x4)
AHardware needed: 35mm Allen Head bolts (x2) A
Hardware needed: 35mm Allen Head bolts (x6)
A
AAD
A
A
A
D