Naomi Home IdealBase Platform Bed User manual

Assembly Instructions
Please take a moment to read through the entire instruction booklet before assembly to
familiarize yourself with this product. Once you feel ready to start, follow the instructions
step by step and this should make this process as easy as we could make it for you.
If you need help or have damaged or missing parts, contact customer service at
www.NaomiHome.com.
Page 1 of 7
NAOMI
IdealBase Platform Bed
HOME
©
2017 Naomi Home Inc. - All Rights Reserved.

Page 2 of 7
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD
•This product includes small parts, sharp points and sharp edges in its unassembled
state. Keep unassembled parts away from children under 3 years of age, & animals.
•If used improperly, your child may fall, creating risk of injury or
damage. Children should not be permitted to jump, climb or pull on the bed.
USE AND MAINTENANCE
•Use on level surfaces only
•Because this product needs assembly, it is prone to working itself loose from time to
time depending on the use. Please take the time to check that all connections are still
tight and working properly for safety.
•Only clean using a damp cloth and mild detergent, do not use bleach or abrasive
cleaners.
PARENTAL SUPERVISION IS REQUIRED
•This Naomi Home product is intended for use age 3+.
•Parents or Guardians should supervise use under the intended age specifically
regarding children that may have access to it and might climb on the unit.
ASSEMBLY RECOMMENDATIONS
•Check you have all the components and tools listed on page 2 and 3.
•Do not stand or put weight on this product during assembly, this could cause damage.
•Remove all hardware from the plastic bags and separate them into their groups.
•Assemble the item as close to its final position (in the same room) as possible.
•Assemble on a soft level surface to avoid damaging the unit or your floor.
•Make sure you have enough space to layout the parts before starting.
•Parts of the assembly may be easier with 2 people.
•Dispose of all packaging carefully and responsibly.
•Do not use this item if any components are missing or damaged.
•We do not recommend the use of power drill/drivers for inserting screws, as this could
damage the unit. Only hand tighten. .
WARNING CAUTION

Platform Bedframe
x 1
1
COMPONENT PARTS
Please check that you have all the parts listed below
Full, Queen, King, CA King
2nd Platform x 1
Bolt
x 2 x 2
Wing Nut
x 2
Page 3 of 7
ASSEMBLY HARDWARE
12
ABC
Spacer
* For Double, Queen, King, and CA King sizes. Twin size is not required.

ASSEMBLY INSTRUCTIONS
2
1
Remove all components
from the carton(s) and posi-
tion them on the oor.
NOTE: Twin / Twin XL sizes
(quantity 1). All other sizes
(quantity 2).
Unfold the unit
from the center
and lay at.
Page 4 of 7
1
1

ASSEMBLY INSTRUCTIONS
4
3
Raise all six legs to
the upright position.
Each of the four end
legs have separate
support arms.
Rotate the support
arms to hook onto
the bolts and tighten
with installed wing
nuts. Repeat the pro-
cess for the remain-
ing three end legs
NOTE: The two center
legs do not require
wing nuts.
Page 5 of 7
1

ASSEMBLY INSTRUCTIONS
6
5
Turn the IdealBase
over and upright
For Twin or Twin XL,
Your Bed is Com-
plete.
For all other sizes,
repeat steps 1 - 4
for the additional
IdealBase unit.
Align both base
units side by side
where you intend
to install the bed.
Attach the two
sides together by
inserting bolt A
into base unit 1
hole in the side of
the main cross bar
and through into
base unit 2 and
tighten the wing
nut. Repeat for
other end with 2nd
Bolt.
Page 6 of 7
Bed 1 Bed 2

ASSEMBLY COMPLETE
Page 7 of 7
www.NaomiHome.com
MADE IN CHINA
Product Packaging Information
Model #:
Color:
Shipment Ref. #:
Date:
________________________________
__________________________________
_________________________
__________________________________
CONGRATULATIONS, YOUR NAOMI HOME IDEALBASE
PLATFORM BED IS COMPLETE!
NAOMI
HOME
83311
Black
8899939575
2018.8.10