Naomi Home Amy User manual

Page 1 of 17
NAOMI
Amy Oce Cabinet
HOME
Product Dimensions:
30.79”L×15.63”D×26.42”H
Assembly Instructions
Please take a moment to read through the entire instrVction booklet before assembly to
familiarize yourself with this product. Once you feelready to start, follow the instructions
step by step and this should make this process as easy as we coVld make it for you.
If you need help or have damaged or missing parts, contBDUDVTUPNFSTFSWJDFBU
Warning:Replacement parts may be obtained from any of our www.NaomiHome.com dealers
www.NaomiHome.com.
©
2023 Naomi Home, Inc. - All Rights Reserved.

Page 2 of 17
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD
•
USE, MAINTENANCE & ASSEMBLY
PARENTAL SUPERVISION IS REQUIRED
WARNING CAUTION
SAFETY WARNINGS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This product includes small parts, sharp points and sharp edges in its unassembled state.
Keep unassembled parts away from children under 3 years of age, and animals.
Follow the information on the warnings appearing on FDELQHW and on the
carton. Do not remove warning label from cabinet.
Do not allow children under 3 years of age to use the cabinet.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Parents or Guardians should supervise use under the intended age specifically regarding
children that may have access to it and climb on the unit.
Do not allow horseplay on, under, or behind the unit and prohibit jumping on the cabinet.
If used improperly, your table may be pulled over or fall, creating risk of injury or
damage. Children should not be permitted to climb or pull on the cabinet.
Periodically check and ensure that the components are in their proper position, free from
damage, and that all connectors are tight.
Use on level surfaces only. Assemble on a soft level surface to avoid damage to unit or floor.
Do not use this item if any components are missing or damaged.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Only clean using damp cloth and mild detergent, do not use bleach or abrasive cleaners.
Check you have all components and tools listed on page 4
Do not stand or put weight on this product during assembly, this could cause damage.
Remove all hardware from the plastic bags and separate them into groups.
Assemble the item as close to its final position (in the same room) as possible.
Certain assembly steps may be easier with 2 people.
Dispose of all packaging carefully and responsibly.
We do not recommend power screwdrivers. Only use hand screwdrivers to prevent
damage to unit.
•
Enfants morts suite au basculement d’un meuble.
Afin de limiter le risque de basculement de meuble:
TOUJOURS utiliser les fixations anti-basculement.
NE JAMAIS installer de TV sur ce produit.
NE JAMAIS laisser d’enfants se tenir debout sur les tiroirs,
portes ou etageres, y grimper ou s’y suspendre.
NE JAMAIS ouvrir plus d’un tiroir a la fois.
TOUJOURS placer les choses les plus lourdes dans les tiroirs du bas.
Han muerto ninos por el vuelco de meubles.
Para limitar el riesgo de vuelco de los meubles:
Utilisar SIEMPRE las fijaciones antivuelco que suministran.
NUNCA instalar un TV sobre este producto.
NUNCA permitar que los ninos se pongan de pie, trepen o
se cuelguen de los cajones, puertas o baldas.
NUNCA abrir mas de un cajon a la vez.
Colocar los objetos mas pesados en los cajones inferiores.
•
•
•
•
•
•
•
•
•
•
!
FURNITURE TIP-OVER HAZARD
•
•
•
•
•
Children have died from furniture tip-over
To reduce the risk of furniture tip-over:
ALWAYS install tip-over restraint especially if used by a wall or in the open.
NEVER put a TV on this product
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
NEVER open more than one drawer at a time.
ALWAYS place heaviest items in lowest cabinet.
Keep these instructions for future reference.
•

Page 3 of 17
This drawing is to give you an overall idea only of how this assembly will go together
and does not replace the assembly instructions.
ASSEMBLY*/45365*0/
Please take a moment to read through the whole instruction booklet before assembly to familiarize
yourself with this product. Once you feel ready to start, follow the instructions step by step and this
should make thisprocess as easy as we could make it for you.
1
2
3
4
5
6
7
8
8
9
10
11
12
13

COMPONENT PARTS
Please check that you have all the parts listed below
Rear Wheel×
Front ZKHHOZLWKEUDNHV[
ASSEMBLY HARDWARE
ABCDE
FGHJK
Screw
×20+2
Black
White
Screw
×6+1
Screw ×12+2
Screw ×50+4
Cam Bolt
×20+2
Wood Dowel
Pin
×26+2 ×20+2Cam Lock
Drawer Door Lock×2
Page 4 of 17
Tools RequiredTools Required
Phillips Screwdriver
(Medium) (not included)
*Do Not Use Power
Screwdriver or Drill.
Hex Screwdriver
(included)
 Top Panel ×1
 Bottom Panel×1
 Left Side Panel ×1
 Right Side Panel ×1
 Neutral Plate ×1
 $BCJOFUFront Door ×1
 $BCJOFU Middle Panel ×1
 Back Panel×2
 Drawer Left Panel×5
 Drawer Right Panel×5
 Drawer Bottom Panel×5
 Drawer Front Panel ×5
 Drawer Back Panel×5
Drawer Slide
×10
LMNQ
P
Screw ×20+2
×8+1 ×4 ×1
1
2
3
4
5
6
7
8
8
9
10
11
12
13

G
ASSEMBLY INSTRUCTIONS
2
1
Select G (×10) .Divide G(×10)
into Drawer Slide Inner(×10)
and Drawer Slide Outer(×10).
Drawer Slide InnerSDUW
Drawer Slide InnerSDUW
Drawer Slide OuterSDUW
Drawer Slide OuterSDUW
Release Tabs
Select 3(×1) and C(×2).Insert
C(×2) into 3.
Page 5 of 17
3
C
C
C

Drawer Slide OuterSDUW
Drawer Slide OuterSDUW
Select 7(×1), A(×2) and B(×2).In-
sert 7 into 3 with A(×2) and
C(×2). Insert B(×2) into 7.
Page 6 of 17
ASSEMBLY INSTRUCTIONS
4
3
7
3
B
B
B
C
C
A
A
A
F
F
F
F
5
F
F
F
F
F
F
F
F
Select 5(×1), F(×10) and Drawer
Slide Outer QBSU (×5). Attach
Drawer Slide OuterQBSU(×5) to 5
with F(×10).

Select 5(×1) and C(×2).Insert
C(×2) into 5.
C
C
C3
A
Page 7 of 17
ASSEMBLY INSTRUCTIONS
6
5
Insert 7 into 5 with A(×2) and C(×2).
Insert B(×2) into 7.
C
5
5
7
B
A
B
B
C
C
A

Drawer Slide OuterSDUW
Drawer Slide Outer
Drawer Slide Outer
Drawer Slide Outer
Drawer Slide Outer
Drawer Slide Outer
F
F
Select 4(×1), F(×10) and Drawer
Slide Outer QBSU (×5). Attach
Drawer Slide OuterQBSU(×5) to 4
with F(×10).
Page 8 of 17
ASSEMBLY INSTRUCTIONS
8
7
Install C(×6) into 1. Insert F(×2) into
P(×1) into 1.
F
F
4
F
F
F
F
F
FFF
1
C
C
C
C
CC
C
F
F
F
P
F
P

A
A
C
Insert 3 into 1 with A(×2) and C(×2).
Insert 5 into the middle hole of 1 with
A(×2) and C(×2).
Insert B(×2) into 5.
Repeat for 3.
Insert 4 into 1 with A(×2) and C(×2).
Insert B(×2) into 4.
Page 9 of 17
ASSEMBLY INSTRUCTIONS
10
9
C
B
B
B
A
A
B
4
1
B
A
A
C
B
B
C
1
4
5
3
B
C
A
C
C
C
A

3
3
Select A(×6) and E(×6).
Insert 2 into 4,5 and 6 with
A(×6) and E(×6).
Page 10 of 17
ASSEMBLY INSTRUCTIONS
12
11
Select 8(×2).Install 8(×1) along
the grooves of 3 and 5.Repeat
for the other 8.
5
8
8
5
4
8
8
2
4
A
E
E
E
E
E
E
E
A
AA
AA
A

K
K
L
L
K
L
Page 11 of 17
ASSEMBLY INSTRUCTIONS
14
13
Select K(×3),L(×2) and J(×20).
Insert K(×2) into 2 with J(×8).
Repeat for L(×2).
J
J
J
J
J
J
J
J
JJ
J
J
JJ
JJ
J
J
J
JJ
JJ
J
2
Select F(×8),M(×12) and N(×4).
Insert N(×4) into F(×8) into cor-
ners of 8(×2).
Insert M(×4) into 8(×1).Repeat for
the other 8.
1
N
M
M
M
M
M
M
M
M
N
N
N
N
F
F
F
F
F
F
F
F
F
F
8
8
K

Install 11(×5) along the grooves
of 9(×5) and 10(×5).
Select D(×20),9(×5),10(×5) and
13(×5).
Insert D(×2) into 9(×1) into one
side of 13.
Repeat for another 9(×4) and
13(×4).
Insert D(×2) into 10(×1) into the
other side of 13.Repeat for
another 10(×4) and 13(×4).
Page 12 of 17
ASSEMBLY INSTRUCTIONS
16
15
11
13
9
9
10
10
D
D
D
D
D
D

C
C
C
9
B
A
C
C
Select A(×10),B(×10) and 12(×5).
Insert 12 into 9 and 10 with A(×2),
B(×2) and C(×2). Repeat for another
12(×4).
Select 12(×5) and C(×10).
Insert C(×2) into 12(×1).
Repeat for another 12(×4).
Page 13 of 17
ASSEMBLY INSTRUCTIONS
18
17
12
12
10
C
A
B
B
A

Drawer Slide Inner
Drawer Slide Inner
Drawer Slide Inner
Select F(×20) and Drawer Slide
Inner (×10). Attach Drawer Slide
Inner(×5) to 9(×5) with F(×10).
Repeat for 10(×5).
Page 14 of 17
ASSEMBLY INSTRUCTIONS
20
19
Carefully insert drawer box by
aligning inner and outer slides
and pushing drawer into place
until clicks on both sides.
Repeat for other drawer boxes.
Note: it may be easier to insert
inner to outer by fully extend-
ing drawer slide out.
F
F
F
F
F
F
9
10

Q
HH
H
Select 6(×1),H(×2) and Q(×4).
Insert H(×2) and Q(×4) into 6.
Q
QQ
Q
Q
6
Insert H(×1) into Cabinet with
Q(×4).
Repeat for the other H(×1).
Page 15 of 17
ASSEMBLY INSTRUCTIONS
22
21
H
H
Q
Q
QQ
Q
Q
QQ

ASSEMBLY INSTRUCTIONS
23
24
Anti-Tipping Hardware-
Opens one drawer at a time.
Page 16 of 17
HOW TO REMOVE A DRAWER
lf the drawer is installed
in a cabinet and the position
is incorrect or affects
the assembly of otherdrawers,
it needs to be removeoand
reassembled,as follows
HOW TO REMOVE A DRAWER
lf the drawer is installed
in a cabinet and the position
is incorrect or affects
the assembly of otherdrawers,
it needs to be removeoand
reassembled,as follows
press down
press up
HOW TO REMOVE A DRAWER
lf the drawer is installed
in a cabinet and the position
is incorrect or affects
the assembly of otherdrawers,
it needs to be removeoand
reassembled,as follows
press down
press up

ASSEMBLY COMPLETE
Page 17 of 17
www.NaomiHome.com
MADE IN CHINA
Product Packaging Information
Model #:
Color:
Shipment Ref. #:
Date:
________________________________
__________________________________
_________________________
__________________________________
A A YCONGR TUL TIONS, OUR NAOMI HOME AMY OFFICE
CABINET IS COMPLETE!
®