Naomi Home Convertible Tufted Futon User manual

Assembly Instructions
Product Dimensions:
82” L x 35” D x 32” H
Please take a moment to read through the entire instruction booklet before assembly to
familiarize yourself with this product. Once you feel ready to start, follow the instructions
step by step and this should make this process as easy as we could make it for you.
If you need help or have damaged or missing parts, contact customer service at
www.NaomiHome.com.
Page 1 of 8
NAOMI
Convertible Tufted Futon
HOME
©
2018 Naomi Home, Inc. - All Rights Reserved.
Insert Completed Product Line Art
Lines min 0.75 - 1.0pt weight

Tools Required
Phillips Screwdriver
(Medium)
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD
•This product includes small parts, sharp points and sharp edges in its unassembled
state. Keep unassembled parts away from children under 3 years of age, & animals.
•If used improperly, your doll bunk bed may be pulled over or fall, creating risk of injury or
damage. Children should not be permitted to climb or pull on the Futon.
USE AND MAINTENANCE
•Use on level surfaces only
•Because this product needs assembly, it is prone to working itself loose from time to
time depending on the use. Please take the time to check that all connections are still
tight and working properly for safety.
•Only clean using a damp cloth and mild detergent, do not use bleach or abrasive
cleaners.
PARENTAL SUPERVISION IS REQUIRED
•This Naomi Kids product is intended for child use age 3+.
•Parents or Guardians should supervise use under the intended age specifically
regarding children that may have access to it and might climb on the unit.
ASSEMBLY RECOMMENDATIONS
•Check you have all the components and tools listed on page 2 and 3.
•Do not stand or put weight on this product during assembly, this could cause damage.
•Remove all hardware from the plastic bags and separate them into their groups.
•Assemble the item as close to its final position (in the same room) as possible.
•Assemble on a soft level surface to avoid damaging the unit or your floor.
•Make sure you have enough space to layout the parts before starting.
•Parts of the assembly may be easier with 2 people.
•Dispose of all packaging carefully and responsibly.
•Do not use this item if any components are missing or damaged.
•We do not recommend the use of power drill/drivers for inserting screws, as this could
damage the unit. Only use hand screwdrivers.
WARNING CAUTION
Allen Wrench
(included)
Page 2 of 8

This drawing is to give you an overall idea only of how this assembly will go together and does
not replace the assembly instructions.
Please take a moment to read through the whole instruction booklet before assembly to familiarize
yourself withthisproduct . Once you feel ready to start, follow the instructionsstep by step and thisshould
mak e thisprocess as easy as we could make it for you.
Due to the number of parts involved
assembly can take a few hours
so set aside between 30 minutes and
1 hour to assemble this
without rushing.
ASSEMBLY AT A GLANCE
Page 3 of 8

COMPONENT PARTS
Please check that you have all the parts listed below
Bolt
x 2 x 2
ASSEMBLY HARDWARE
FE
Wood Dowel Pin
G
x 1
Allen Wrench
1. Arm (seated Right) x1
2. Futon Body x1
3. Arm (seated Left) x1
4. Front Outer Leg x2
5. Center Leg x2
6. Rear Outer Leg x2
Metal Mount Bracket
x 2
Fabric Protector
x 2
B
A
Washer
C
x 6 x 8
Screw
D
Page 4 of 8
13
2
45 6

ASSEMBLY INSTRUCTIONS
2
1
Select 2, 4 x2, 5 x2, 6 x2, C x6, D
x8. Turn Futon Assembly unside
down on a soft surface to not
scratch the material. Insert the
post of 4 into C fabric protector
and assemble to front left hole
by turning clockwise until hand
snug. Repeat for other 4 leg into
front right hole. Select 5 x2,
place C over post of 5 x2 and
screw one leg into front center
hole. Repeat for back center
hole. Place C fabric protection
x2 over area for 6 in rear corners
with 4 D Screws attach 6 to 2.
Repeat for other 6 leg.
Page 5 of 8
2
Select A x2, on left (seated)
end of futon sofa assembly
attach A mount bracket
using E bolt x2. Repeat for
2nd A bracket on other end.
5
66 5
4
4
5
D
2
A
E

ASSEMBLY INSTRUCTIONS
4
3
Select 1, 3. Align
mount brackets on 1
to Right (seated)
end of Futon Sofa 2.
Slide both metal
brackets on 1 into
the brackets on 2
until snug. Lift
slightly to see if
aligned correctly.
Repeat for 3 to sofa
2.
Congratulations Your
Naomi Home Tufted
Futon is complete.
Operating: Raise
back rests into full
upright position. To
lower back rests pull
forward 1 side until
hardware clicks and
releases. Repeat for
other back rest.
Page 6 of 8
2
13
OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS
6
5
Lower backrests
completely at
for bed.
To recline back
rests to your
desired angle
always pull
backrest all
the way for-
ward for it to
release, then
return to at
sleeping posi-
tion. Then pull
backrest again
forward to
desired recline
position.
Page 7 of 8

ASSEMBLY COMPLETE
Page 8 of 8
www.NaomiHome.com
MADE IN CHINA
Product Packaging Information
Model #:
Color:
Shipment Ref. #:
Date:
________________________________
__________________________________
_________________________
__________________________________
ENJOY YOUR NEW
NAOMI HOME CONVERTIBLE TUFTED FUTON!
NAOMI
HOME