Napoleon ALLURAVISION Series User manual

FRENCH PG.35
W415-2212 / G / 02.10.20
ADD MANUAL TITLE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030
Phone [phone] • www.napoleon.com • [email protected]
CERTIFIED TO THE CANADIAN AND AMERICAN NATIONAL STANDARDS:
CSA 22.2 NO. 46 / UL 1278
INSTALLER:
Leave this manual with the appliance
CONSUMER:
Retain this manual for future reference
Product Name / Code
(MUST use title from Price Book)
(IF MULTIPLE, _____ ILLUSTRATED)
MULTIPLE PRODUCT CODES (LEAVE BLANK IF N/A)
ADD PRODUCT IMAGE
ADD BUTTON BATTERY WARNING IF APPLICABLE
CSA /
INTERTEK
LOGO
SAFETY INFORMATION
- Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this or any other appliance.
FIRE OR EXPLOSION HAZARD
If the information in these instructions are
not followed exactly, a fire or explosion may
result causing property damage, personal
injury, or loss of life.
WARNING
!
ENGLISH
$10.00
FOR INDOOR USE ONLY
IF INSTALLATION + OPERATION, ADD SERIAL
NUMBER LABEL HERE
IF SEPARATE MANUALS, ADD “PLACE
BARCODE LABEL ON THE OWNER’S MANUAL”
Alluravision™ Series
FRENCH PG. 35
NEFL42CHD / NEFL50CHD / NEFL60CHD / NEFL74CHD / NEFL100CHD
NEFL42CHS / NEFL50CHS / NEFL60CHS / NEFL74CHS
INSTALLATION AND
OPERATION MANUAL
2021
This appliance has a remote that requires button
batteries that are hazardous to young children.
(NEFL50CHD llustrated)

W415-2212 / G / 02.10.20
EN
2
safety information
• If equipped with a heater, this appliance can be hot when operated and can cause severe
burns if contacted.
• Do not operate appliance before reading and understanding operating instructions. Failure to operate
appliance according to operating instructions could cause fire or injury.
• Do not install damaged, incomplete or substitute components.
• Do not burn wood or other materials in this appliance.
• All electric appliances have hot and arcing or sparking parts inside. Do not use it in areas where a gas
line, paint or flammable liquids are present.
• Any safety screen or guard removed for servicing must be replaced prior to operating the appliance.
• It is imperative that the control compartments, circulating blower and its passageway in the appliance
are kept clean. The appliance should be inspected before use and at least annually by a qualified service
person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material,
etc. The appliance area must be kept clear and free from combustible materials, gasoline and other
flammable vapors and liquids.
• Under no circumstances should this appliance be modified.
• Do not use this appliance if any part has been under water. Immediately call a qualified service technician to
inspect the appliance and to replace any part of the control system which has been under water.
• If equipped with a glass door, do not operate the appliance with the glass door removed, cracked or
broken. Replacement of the glass should be done by a licensed or qualified service person. Do not strike
or slam shut the appliance glass door.
• Keep the packaging material out of reach of children and dispose of the material in a safe manner. As
with all plastic bags, these are not toys and should be kept away from children and infants.
• Servicing should be done only while the appliance is disconnected from the power supply circuit.
• Always unplug appliance when not in use.
• Do not operate this appliance with a damaged cord or plug after the appliance malfunctions, has been
dropped or damaged in any manner. Return appliance to authorized service facility for examination,
electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• When installing this appliance in a room where water is present, the installation must comply with codes
recognizing the increased hazard of electrical shock and electrocution.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord
away from traffic area and where it will not be tripped over.
• Connect to properly grounded outlets only.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the appliance.
• It is normal for your electric appliance to produce noise, especially when installed in a quiet space such
as a bedroom.
!WARNING
Insert appropriate “Bathroom Warning (Electric)” (see 3-Warnings template folder).
note:
This appliance is NOT suitable for installation in a bathroom.

EN
W415-2212 / G / 02.10.20 3
safety information
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like
a carpet, where openings may become blocked.
• Always plug appliances directly into a wall outlet/receptacle. Never use an extension cord or relocatable
power tap (outlet/power strip).
• These appliances are tested and listed for use only with the optional accessories listed in these instructions.
Use of optional accessories not specifically tested for this appliance could void the warranty and/or result in
a safety hazard.
For appliances equipped with a heater:
• Risk of burns. Power to the appliance should be turned off and the appliance allowed to cool before
servicing. To disconnect power to the appliance, turn controls to off, then remove plug from outlet.
• Young children should be carefully supervised when they are in the same room as the appliance.
Toddlers, young children and others may be susceptible to accidental contact burns. A physical barrier is
recommended if there are at risk individuals in the house. To restrict access to an appliance or stove, install
an adjustable safety gate to keep toddlers, young children and other at risk individuals out of the room and
away from hot surfaces.
• Clothing or other flammable material should not be placed on or near the appliance.
• Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.
• Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot surfaces.
• Even after the appliance is off, the glass and/or screen will remain hot for an extended period of time.
• Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from
hot surfaces. These screens and guards must be fastened to the floor.
• Ensure clearances to combustibles are maintained when building a mantel or shelves above the appliance.
Elevated temperatures on the wall or in the air above the appliance can cause melting, discolouration or
damage to decorations, a TV or other electronic components.
!WARNING
!
WARNING:
This product can expose you to chemicals including lead and lead
compounds, which are known to the State of California to cause cancer, and chemicals includ-
ing BBP and DEHP, which are known to the State of California to cause birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.

W415-2212 / G / 02.10.20
EN
4
table of contents
1.0 dimensions 5
2.0 general information 6
2.1 listing approvals 6
2.2 general instructions 6
2.3 rating plate information 7
2.4 hardware list 7
2.5 label location 8
3.0 location 9
3.1 unpacking and testing the appliance 9
3.2 grounding the appliance 9
4.0 installation 10
4.1 minimum clearance to combustibles 10
4.2 minimum mantel clearances 10
4.3 installing the appliance onto the wall 11
4.4 recessing the appliance into the wall 13
4.4.1 trim installation (recessed installation only) 14
4.4.2 installing the appliance into a mantel 15
4.5 120V hard wiring installation 16
4.5.1 NEFL42 / 50 / 60 / 74 CHS 120V hardwiring 16
4.5.2 NEFL42 / 50 / 60 / 74 CHD 120V hardwiring 17
4.6 240V hard wiring installation (NEFL42 / 50 / 60 / 74 / 100 CHD only) 18
5.0 framing - recessed installation 20
6.0 finishing 21
6.1 crystal ember installation 21
6.2 optional topaz glass chips and drift wood log installation 21
6.3 front glass installation and removal 22
7.0 wiring diagram 23
7.1 NEFL42 / 50 / 60 / 74 CHS wiring diagram 23
7.2 NEFL42 / 50 / 60 / 74 / 100 CHD wiring diagram 24
8.0 operation 25
8.1 operating control panel 25
8.2 operating remote control 26
9.0 maintenance 27
9.1 remote battery installation 27
10.0 replacement parts 28
10.1 NEFL42 / 50 / 60 / 74 CHS 29
10.2 NEFL42 / 50 / 60 / 74 / 100 CHD 30
11.0 troubleshooting 31
12.0 warranty 33
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial, are denoted by a vertical line in the margin.
note:

EN
W415-2212 / G / 02.10.20 5
dimensions
1.0 dimensions
A
17 5/16”
(440mm)
D
VIEWING AREA
CORD LOCATION
11 1/16”
(281mm)
Dimensions
Model No. A B C D
NEFL42CHS-1 44 7/16”
(1128mm)
4 1/4”
(108mm)
42 1/16”
(1068mm)
40 1/4”
(1022mm)
NEFL50CHS-1 52 11/16”
(1338mm)
50 5/16”
(1278mm)
48 1/2”
(1232mm)
NEFL60CHS-1 62 9/16”
(1588mm)
60 3/16”
(1528mm)
58 5/16”
(1482mm)
NEFL74CHS-1 76 3/4”
(1948mm)
74 5/16”
(1888mm)
72 1/2”
(1842mm)
NEFL42CHD-1 44 7/16”
(1128mm)
5 13/16”
(148mm)
42 1/16”
(1068mm)
40 1/4”
(1022mm)
NEFL50CHD-1 52 11/16”
(1338mm)
50 5/16”
(1278mm)
48 1/2”
(1232mm)
NEFL60CHD-1 62 9/16”
(1588mm)
60 3/16”
(1528mm)
58 5/16”
(1482mm)
NEFL74CHD-1 76 3/4”
(1948mm)
74 5/16”
(1888mm)
72 1/2”
(1842mm)
NEFL100CHD-1 102 11/16”
(2608mm)
100 5/16”
(2548mm)
98 1/2”
(2502mm)
B
15 7/8”
(402mm)
front view side view
top view
C
CORD LOCATION
3/4”
(18mm)

W415-2212 / G / 02.10.20
EN
6
general information
2.0 general information
This appliance has been tested in accordance with the CSA Standards for fixed and location-dedicated electric
room appliances in the United States and Canada. If you need assistance during installation, please contact your
local dealer.
*Not applicable to NEFL42CHS-74CHS
note:
This appliance must be electrically wired and grounded in accordance with local codes or, in the absence of
local codes, with National Electric Code ANSI/NFPA 70-latest edition in the United States or the Canadian
Electric Code, CSA C22.1 in Canada.
2.1 listing approvals
2.2 general instructions
• Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
• The appliance may emit a slight, harmless odour when first used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
• If your appliance does not emit heat when called for, consult the “operation” section of this manual for further
information.
• Use with a CSA or UL certified surge protector.
• Do not route the power cord directly underneath the appliance.
This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured
Model No. Net Weight Gross Weight
NEFL42CHD 63.3 lbs (28.7kg) 82.7 lbs (37.5kg)
NEFL50CHD 71.7 lbs (32.5kg) 94.8 lbs (43kg)
NEFL60CHD 82.7 lbs (37.5kg) 109.1 lbs (49.5kg)
NEFL74CHD 99.6 lbs (45.2kg) 130 lbs (59kg)
NEFL100CHD 130 lbs (59kg) 167.6 lbs (76kg)
Model No. Net Weight Gross Weight
NEFL42CHS 46.7 lbs (21.2kg) 62.4 lbs (28.3kg)
NEFL50CHS 54.5 lbs (24.7kg) 73 lbs (33.1kg)
NEFL60CHS 63.3 lbs (28.7kg) 84.2 lbs (38.2kg)
NEFL74CHS 77.2 lbs (35kg) 103.6 lbs (47kg)
Description Electric Appliance
Type
3 Way Mounting Unit
Wall-Mount, Recess into Wall and
Assemble with mantel
Voltage 120V AC / 240V AC*
Watts MAX 1450W / 2800W*
Amps 15 AMP Grounded Circuit
This electric appliance meets the contruction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
As with most electronic devices, your new electric appliance has been designed to operate at temperatures
between 5°C (41°F) and 35°C (95°F). During the colder winter months, allow the appliance to reach room
temperature before turning it on.

EN
W415-2212 / G / 02.10.20 7
general information
The below illustration is for reference only. Refer to the appliance rating plate for accurate information.
The rating plate must remain with the appliance at all times. It must not be removed.
note:
2.4 hardware list
2.3 rating plate information
Description Quantity
NEFL42CHS
/ NEFL42CHD
NEFL50CHS
/ NEFL50CHD
NEFL60CHS
/ NEFL60CHD
NEFL74CHS
/ NEFL74CHD NEFL100CHD
AWood Screws 8 14
BDrywall Anchors 8 14
CST4x12 Metal Screws 25
DCover Plate 1
EStrain Relief 1
FCord Corner 2
GCord Cover 2
HDoor Cover Plate 1
ISide Wall Mounting Bracket 2
W385-2226
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARD: CSA 22.2 NO. 46 AND UL 2021 / HOMOLOGUÉ SELON LES
NORMES NATIONALES CANADIENNES ET AMÉRICAINES: CSA 22.2 NO. 46 UL 2021
FOYER ÉLECTRIQUE. HOMOLOGUÉ POUR INSTALLATION
DANS UNE CHAMBRE À COUCHER, UNE SALLE DE BAIN ET
UN STUDIO. APPROPRIÉ POUR INSTALLATION DANS UNE
MAISON MOBILE.
ELECTRIC FIREPLACE. SUITABLE FOR BEDROOM
AND BED-SITTING ROOM INSTALLATION. SUITABLE
FOR MOBILE HOME INSTALLATION.
VOLTAGE: 120VAC TENSION: 120VCA
FREQUENCY: 60Hz FRÉQUENCE: 60Hz
POWER: 1450W PUISSANCE: 1450W
DATE CODE: XXXXX CODE DE DATE:
DESIGNED IN NORTH AMERICA
BY WOLF STEEL LTD.
MADE IN CHINA FABRIQUÉ EN CHINE
WOLF STEEL LTD.
24 NAPOLEON ROAD,
BARRIE, ON, L4M 0G8 CANADA
SERIAL NUMBER/NO. DE SÉRIE: NEFL
MODEL / MODÈLE
DÉSIGNÉ EN AMÉRIQUE DE
NORD PAR WOLF STEEL LTD.
MASTER CONTRACT: 161746 CONTRAT-CADRE: 161746
NEFL42CHS NEFL42CHS
SAMPLE
EFGH
D
AC
B
I

W415-2212 / G / 02.10.20
EN
8
general information
2.5 label location
Do Not Cover Label
(W385-2210)
Warning Label
(W385-1944)
Caution Label
(W385-1945)
Wiring Diagram Label
(W385-2222 or W385-2223)
Hardwiring Label
(W385-2224 or W385-2225)
Rating Plate Label
Warning Label
(W385-1943)
Power Cord
Hot Surface Label
(W385-2017)
Front Glass Label
(W385-2321)
Hardwiring Warning
Label
(W385-2380)
(NEFL42-100CHD only)

EN
W415-2212 / G / 02.10.20 9
locating appliance
3.1 unpacking and testing the appliance
3.2 grounding the appliance
• Due to high temperatures, this electric appliance should be located out of traffic. Keep combustible materials
such as furniture, pillows, bedding, papers, clothes and curtains at least 36” (91.4cm) from the front of the
appliance.
• Never locate this electric appliance where it may fall into a bathtub or other water container.
• Wear safety gloves and safety glasses for protection during installation and maintenance.
• To prevent contact with sagging or loose insulation, the electric appliance must not be installed against vapor
barrier or exposed insulation. Localized overheating could occur and a fire could result.
• Do not expose the electric appliance to the elements (such as rain, etc.).
!WARNING
Carefully remove the appliance from the box. Prior to installing the appliance, remove all packaging material and
test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located
120V, 15 Amp minimum grounded outlet.
Grounding Methods
Metal Screw
(A)
Not allowed in Canada
Grounding Means
Adapter
Grounding Pin
Cover of
grounded
outlet box (C)
(B)
The appliance is shipped with the front glass not assembled onto the appliance (see “front glass installation
and removal” section for assembly instructions). Front glass must be installed during operation.
note:
3.0 location
This appliance must be connected to a dedicated 15 amp circuit. The use of an extension cord is NOT
permitted.
note:
NEFL42-74CHS models are for use with 120 volts; NEFL42-100CHD models are for use with 240 volts. The
cord has a plug as shown in (A). An adapter as shown in (C) is available for conecting three-blade grounding type
plugs to two-slot receptables, as shown in (B). The green grounding plug extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a
three-slow grounded receptable is available.
To disconnect appliance, turn controls to OFF, then remove plug from outlet.

W415-2212 / G / 02.10.20
EN
10
installation
4.0 installation
!WARNING
• Risk of fire! The power cord must not be pinched against a sharp edge. Secure cord to avoid tripping or
snagging to reduce the risk of fire, electric shock, or personal injury. Do not run cord under carpeting. Do not
cover cord with throw rugs, runners, or similar items. Arrange cord away from traffic areas and where it will not
be tripped over.
• Risk of fire! To prevent a possible fire, do not block air intake or exhaust in any manner. Do not use on soft
surfaces where openings may become blocked.
• Risk of fire! Do not blow or place insulation against the appliance.
• This electric appliance is tested and listed for use only with the approved optional accessories. Use of optional
accessories not specifically tested for this electric appliance could void the warranty and/or result in a safety
hazard.
• If the information in these instructions is not followed exactly, a fire or explosion may result causing property
damage, personal injury, or death. Do not store or use gasoline or other flammable vapors in the vicinity of this
or any other appliance.
• This appliance is heavy. It is highly recommended that two people install this appliance.
• If your appliance is equipped with a heater, ensure the heater vents cannot, in any way, be covered as it may
create a fire hazard.
• Do not run the power cord horizontally, directly below the appliance.
Follow all national and local electrical codes.
note:
Your appliance is a wall-mounted, recessed and/or mantel installed appliance. Select a suitable location that is not
susceptible to moisture and is away from drapes, furniture and high traffic areas.
4.1 minimum clearance to combustibles
4.2 minimum mantel clearances
• When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
!WARNING
Side View
(
Wall Mount
)
8" (203mm)
Mantel
Floor
Wall
Side View (recessed into a wall)
8" (203mm)
0"
0"
0
Mantel
Floor
Measurements are taken from the top of the appliance:
Bottom, Sides, and Back 0”
Top 0” recessed into wall and 8” (203mm) to mantel