NATHAN JAMES Bonnie 74201 User manual

Bonnie Media Unit
Let’s build the
22-0923
Scan me!
Inspiration
Digital Instructions
Free Lifetime Warranty
115
1
1
5
M
I
N
U
T
E
A
S
S
E
M
B
L
Y
SKU 74201

2
This should be easy, just follow
our instructions and you will be
back to Netflix in no time.
Ok, let’s
get rolling
What’s included
What you need
• Some of your favourite bubbly
or your preferred relaxant
• Use the packaging carton as
a working surface to prevent
product damage during assembly
• Phillips head screwdriver
Description Qty
1 Top Panel 1
2 Bottom Unit 1
3 Left Side Panel 1
4 Right Side Panel 1
5 Left Division Panel 1
6 Right Division Panel 1
7 Shelf 1
8 Side Back Panel 2
9 Middle Back Panel 1
10 Doors 2
11 Legs 4
12 Drawer Front Panel 1
13 Drawer Left Side Panel 1
14 Drawer Right Side Panel 1
15 Drawer Back Panel 1
16 Drawer Bottom Panel 1
115:00
Estimated time for assembly
90
lbs table
top
11
lbs drawer 33 lbs cabinet
Weight Limitation
Toll-free at 1-866-619-1004
[email protected]
Nathanjames.com/help
Do not use a drill
Scan me!
Inspiration
Digital Instructions
Free Lifetime Warranty

3
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and
inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.

4
What’s included
Description Qty
A Cam Bolt 16
B Cam Lock 16
CM6*30mm Wood Dowel 20
D M4*12mm Screw 24
E M3.5*10mm Screw 14
F M4*35mm Screw 8
G Door Stop 2
H Hinge 4
I M6*50mm Bolt 8
JFlat Washer 8
K Knob 3
L M4*25mm Bolt 2
M Drawer Runner 1
N M4*16mm Bolt 1
O M4*30mm Screw 4
R Allen Key 1
SSpring Washer 8
Scan me!
Inspiration
Digital Instructions
Free Lifetime Warranty

5
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are lined up and
inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
3. Please use hand tools to assemble this product. Do not use power tools.
A
F
N
K
B
G
O
L
C
H
R
M
D
I
S
E
J

6
Alright, time to get started! But first things first, grab a snack. A
hungry furniture assembler is never a good thing.
Place the Top Panel (1) on the floor and screw the Cam Bolts (A)
into their corresponding holes. Next, attach the Door Stops (G)
to the left and right side using the M3.5*10mm Screws (E).
Step 1
E
E
G
A
A
A
A
G
G
E
E
E
E
A
1
A
A
A
Insider tip: Anywhere you
see this icon, it means we
recommend using a screwdriver.

7
Don’t worry, this step is a lot simpler than it looks. Now we’re going to attach the
Drawer Runners (M) to the Left Division Panel (5) and Right Division Panel (6)
using the M3.5*10mm Screws (E).
Pay careful attention to the labels CL and CR, written on each of the Drawer
Runners (M). The Runner labeled CL should be attached to the Left Division Panel
(5) and the Runner labeled CR should be attached to the Right Division Panel (6).
After you’ve attached the Drawer Runners (M), secure the Cam Locks (A) into
their corresponding holes.
Step 2
EE
E
E
E
E
E
E
E
E
EM
M
M
M
5
6
6EE
E
A
A
5
A
AE
E
E
E
(CL)
(CR)
(CR)
(CL)
Helpful tip: The “C” in CL and CR
stands for Cabinet, so you’ll attach
the CL and CR to the cabinet.
You’ll be using the DL and DR
Drawer Runners in a later step.

8
Now it’s time to start putting together some
of these panels! Also, did you eat your snack
already? We’re not judging, we ate ours in step 2.
Insert the 6*30mm Wood Dowels (C) into their
corresponding holes in the sides of the Shelf (7).
Then, attach the Left Division Panel (5) and Right
Division Panel (6) to the Shelf (7) by aligning the
Wood Dowels (C) with the corresponding holes in
the division panels.
Secure these together using the Cam Locks (B)
by inserting them into the corresponding holes in
the Shelf (7) and tighten.
Step 3
B
B
B
6
7
5
C
C
C
C
B

9
4
6
5
3
Get excited, now is when this baby really starts coming together! Place the Top
Panel (1) on the ground with the Door Stops (G) facing up. Insert 8 of the 6*30mm
Wood Dowels (C) into the corresponding holes in the Top Panel (1).
Attach the Right Side Panel (4), the middle section you assembled in Step 3, and
the Left Side Panel (3) to the Top Panel (1) by aligning the holes with the Wood
Dowels (C) you just inserted and the Cam Bolts (A) you secured in Step 1. Refer to
the illustration below for correct alignment.
Once these are aligned, secure in place using the Cam Locks (B).
Step 4
B
B
C
C
C
C
C
C
C1
G
G
B
B
C

10
This one should be a piece of cake! Slide the Side Back
Panels (8) and Middle Back Panel (9) into the slots in the
cabinet you assembled in Step 4.
Step 5
8
8
9

11
You’re almost halfway done! We’re so proud of you.
Now it’s time to attach the Bottom Unit (2) to the rest of the
cabinet you’ve assembled by first inserting 6*30mm Wood
Dowels (C) into the corresponding holes in the side of the cabinet.
Once aligned, secure in place using the M4*35m Screws (F).
Step 6
F
C
F
F
F
2
F
F
F
F
C
CC
CC
CC
3
5
6
4

12
Time to add the legs! Secure the Legs (11) to the Bottom Unit (2) using the
6*50mm Bolts (I). First place the a Flat Washer (J), then a Spring Washer (S), then
the 6*50mm Bolt (I). Tighten using the provided Allen Key (R). Repeat this process
for all 4 legs, using 2 bolts per leg.
Step 7

13
Hinge time! Attach the Hinges (H) to the Doors (10)
using the M4*12mm Screws (D).
Step 8

14
You’re so close to the finish line we can taste it! Or
maybe that’s the snack we ate earlier…either way, it’s
time to attach those doors!
Attach the Doors (10) to the Left Side Panel (3) and
Right Side Panel (4) by securing the Hinges (H) using
the M4*12mm Screws (D). Repeat this for all hinges on
both doors (you’ll use a total of 4 screws per hinge).
Once complete, attach the Knobs (K) to the Doors (10)
using the 4*25mm Bolts (L).
Step 9

15
Is your cabinet door looking
crooked or unevenly spaced?
Then you’ve come to the right place. Follow the illustrations below
to get your cabinet door aligned and ready for action.
If your door is too low or too high…
Loosen the height screws, then move the door up or down to make it level.
If the space between your doors is o…
Loosen the side-to-side screws, then screw counter-clockwise
to make the gap wider or clockwise to close any gaps.
If you need to adjust the depth of the doors…
Adjust the in-and-out screws until the door is aligned with the side of the cabinet.

16
Now it’s time to assemble the drawer. Attach
the Drawer Left Side Panel (13) and Drawer
Right Side Panel (14) to the Drawer Back
Panel (15) using the M4*30mm Screws (O).
Once secure, slide the Drawer
Bottom Panel (16) into place.
Next, screw the Cam Bolts (A) into the corresponding holes in the Drawer Front Panel
(12). Align those Cam Bolts (A) with the corresponding holes in the Drawer Left Side
Panel (13) and Drawer Right Side Panel (14). Secure in place using the Cam Locks (B).
Step 10
Step 11
15
13
14
16
14
13
A
A
A14
12
B
13
12
15
O
O
O
O
B
B
B
A

17
Remember those Drawer Runners we mentioned in Step 2? Time to put those
to use! Attach the Drawer Runners (M) to the sides of the drawer using the
M3.5*10mm Screws (E). The Runner labeled DL should be attached to the left
side, while the Runner labeled DR should be attached to the right side.
You’ve made it to the final
step! We made this step
super easy, because you
deserve it.
Attach the Knob (K) to the
drawer you’ve just assembled
using the M4*16mm Bolt (N).
Slide the drawer into place,
and voila! You’ve got yourself
a new media unit!
Step 12
Step 13
E
E
E
E
14 E
E
E
15
12
M
M
E
DL
DR
(DL)
(DR)

18
Give us a call 1-866-619-1004 or shoot us a message
at [e-mail] we will issue you a free
replacement with zero hassle.
We really don’t want you to go through the hassle of re-packaging your item
and sending it back, because let’s be honest…nobody has time for that.
No heartburn,
when we handle the return
Our way Their way
Give us a call
Replacement
Replacement
You
Re-package item
Schedule pick up
Track package
You

19
We want your Bonnie Media Unit to last as long as possible, so we recommend
that you tighten the screws 2 weeks after assembly and for added safety
check the tightness of all screws every 2 months.
For proper care and treatment please check our website
at NathanJames.com/products
DO NOT use for commercial purposes
DO NOT frolic on media unit
DO NOT use media unit as foot stool
DO NOT leave spilled liquid on media unit
DO NOT use media unit if damaged
DO NOT make temporary repairs
DO NOT use outdoors
Proper use
Safety rst, fun later
Safe use of this product
starts with you.
Use this Bonnie Media Unit responsibly with
the primary concern for your safety. Follow
assembly instructions carefully and inspect
product upon receipt and each use.
Nathan James and its parent companies cannot
be held legally responsible for any injuries or
death resulted from failure to follow instructions
or improper use of this product.
Do not modify the
structure of this
product in any way.
Our products have been tested to meet specific
safety measures as they were originally
intended to be sold. Any modifications will
present the risk of creating significant safety
issues which NJ will not be responsible for.

20
Brooklyn Burdon
Founder, Nathan James
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends
and family about us or even better leave us a review
online. Spreading the word gives us the opportunity
to make more people happy and keep our
prices low for your next purchase.
We are only in business
if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
[e-mail]
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes
happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we
will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to
scan the QR code to register your product or visit https://goo.gl/i9dk3q