Nauticam 83223 User manual

Current as of 2020-01-06
Instruction Manual for
Bayonet Mount Double Lens Holder for
Arms
PN# 83223, #83253
FOREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximize its performance as well as its lifetime.
WARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use. This warranty only applies to products purchased from
authorized NAUTICAM dealers and does not extend beyond the
original retail purchaser.
To return your product for service, please contact your regional
authorized service center(s). Please note that this warranty only
applies when the product is purchased in the territory where the
service center is located.
NAUTICAM does not hold responsibility for damage, of any nature, to
any equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorized modifications and/or repairs of our products will
automatically invalidate the warranty.
*Remark: #83223 is used as an example in this instruction manual, other same
kind of products will be slightly different in term of appearance.
Remove the bayonet holder by turning the screw unti-clockwise with
an allen key.
Place the arm to the bayonet mounting base as shown.
Align the two bayonet holders, and secure it by tightening the screw
with an allen key.
--- continue on next page ---
IDENTIFICATION OF PARTS
INSTALL TO THE ARM
Screw
Bayonet Holder (2x)
Lens Alignment ‘’I’’ mark
Lens Alignment Dot
Lens Release Button

Current as of 2020-01-06
--- continued from front page ---
Example: CMC & WWL-1 with bayonet adaptor on the double bayonet
holder
SPECIFICATIONS
PN#
Description
Weight
83223
Bayonet Mount Double Lens Holder for Arms
157.8g
83253
Double Bayonet Holder for Arms
159g
COMPATIBILITY
Compatible Lenses:
83201 Wet Wide Lens 1 (WWL-1)
83203 Wet Wide Lens Compact (WWL-C)
83214 Bayonet Mount Adaptor for SMC/CMC
*ATTENTION: #83223 is not compatible with WWL-C
Remark: Nauticam supports only e-manuals. Please download corresponding
product manuals on Nauticam.com website, or contact us for e-manuals.