Nauticam NA-RX100VII User manual

1

2
F
ORWARD
Thank you for your purchase of a NAUTICAM housing.
At NAUTICAM, we pride oursel es in the ability to recognize the requirements of professional
as well as amateur underwater photographers and fulfill them through the inno ati e designs
of our products. We stri e to achie e a high le el of user-friendliness by allowing stress-free
installation and easy operation of all important functions of the camera.
Each housing is indi idually inspected and water pressure tested to ensure optimum quality.
Please read this manual carefully before using the housing, this will maximize its performance
as well as its lifetime.
The illustrations in this manual may differ from the actual product.

3
Warranty ……………………………………………………………………………………………………………. 4
Precautions ………………………………………………………………………………………………………… 5
Package Contents ………………………………………………………………………………………………. 7
Specifications …………………………………………………………………………………………………….. 8
Identification of Parts ………………………………………………………………………………………… 9
Opening and Closing the Housing ……………………………………………………………………… 13
Preparation of the Housing ………………………………………………………………………………… 15
Installing the Camera ………………………………………………………………………………………… 20
Using the flash up/off le er ……………………………………………………………………………… 21
Changing the Port………………………………………………………………………………………………. 22
N50 Short Port with Bayonet Mount – Camera Settings…………………………………….. 24
Installing HDMI Bulkhead (optional) …….………………………………………..……….…………. 28
Installing Handle Brackets and Shutter Release Extension ……………...…………………. 31
Care and Maintenance ………………………………………………………………………………………. 34
Optional Accessories ………………………………………………………………………………………….. 35
T
ABLE OF
C
ONTENTS

4
All NAUTICAM Products are warranted against any material and manufacturing defects for two years from
the date of purchase for consumer use. The warranty period is defined by the in oicing or payment date
by the customer. Alternati ely, the warranty period would be assumed from the day that the product is
shipped from our facility. This warranty only applies to products purchased from authorized NAUTICAM
dealers and does not extend beyond the original retail purchaser.
To return your product for ser ice, please contact your regional authorized ser ice center(s). Please note
that this warranty only applies when the product is purchased in the territory where the ser ice center is
located.
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or
poor maintenance; it is the responsibility of the owner to carefully follow the instructions in our manuals.
NAUTICAM does not hold responsibility for damage, of any nature, to any equipment used with and/or
placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the inability to capture images e en if it is
due to the malfunctioning of our products.
Unauthorized modifications and/or repairs of our products will automatically in alidate the warranty.
W
ARRANTY

5
P
RECAUTIONS
•A water-tight test without the camera inside the housing is highly recommended when
using the system for the first time and after the changing of port and O-ring(s).
•Do not use lubricants from other brands with the silicone rubber O-ring on this housing,
only use the lubricant pro ided by NAUTICAM.
•Discontinue use immediately should you notice any leakage.
•Store the housing in a robust, shock-proof container during transportation; a oid
transporting with any equipment, such as a camera, inside the housing.
•When tra elling by air, do not close the housing as this may lead to a pressure difference
between the atmosphere and inside the housing.
•Care must be taken when opening the housing, as pressure may build up inside the
housing which increases the opening force.

6
•Do not open the product in a wet or sandy en ironment. Protect the interior from
moisture and debris in order to pre ent malfunction or leakage.
•Do not store the product in an en ironment of high humidity.
•Do not lea e the housing and the monitor in direct sunlight for prolonged periods.
•Keep out of reach of children, failure to do so could result in injury.
•Defecti e products should be shipped to our distributors for ser ice, unauthorized
disassembling and/or modifications could result in malfunction or leakage.
•Use only recommended battery with this product, do not mix different specifications or
old and new batteries.
•Do not place excessi e stress on your HDMI cable connector.
•Do not bend or twist your HDMI cable.

7
P
ACKAGE
C
ONTENTS
F OR 17424P,
•Flexitray ● Right Handle ● Two Mounting Balls
•M14 Vacuum Val e ● Vacuum Pump ● Padded Tra el Bag
•Shoulder Strap
•NA-RX100VII Housing
•90181 N50 NA-LX100/LX100II/RX100VI/RX100VII Standard Port
•Set of Handle Brackets with Shutter Release Extension
•90135 Spare Silicone Rubber O-ring for Housing
•O-ring Remo er
•CR2032 Battery (pre-installed)
•Lubricant
•Set of Allen Keys
•Manual Instruction Card

8
S
PECIFICATIONS
Construction
Housing body: Aluminum alloy
Surface treatment: Hard anodized
Display window: Abrasion resistant polycarbonate
Dimensions
Width: 151mm
Height: 101mm
Depth: 137mm
Weight in air 1.09kg
Weight in water 0.28kg (Inc. Camera and battery)
Depth rating 100 m
Compatible
camera Sony Cyber-shot DSC-RX100 VII Digital Camera

9
I
DENTIFICATION OF
P
ARTS
On/Off Button
Mode Dial
Zoom Le er
Housing Lock
Safety Button
Threaded Holes for
Handle Brackets
Housing Lock
Shutter Release Le er
Front Control Wheel
N50 Standard Port
*Handle
brackets and Shutter release extension are not displayed.

10
M10 Strobe Mounting Base
Threaded Holes for
Handle Brackets
M16 Accessory Port
M14 Accessory Port
Moisture Alarm Window
Flash Up/Off Le er
Accessory Coldshoe
Optical Fiber Mount
*Handle brackets and Shutter release ext
ension are not displayed.

11
Fn Button
Mo ie Button
MENU Button
Rear Control Wheel
Display / Up
Selection Button
SET Button
Flash
mode/Right
Selection Button
Dri e Mode/
Left Selection Button
Exposure Compensation/
Down Selection Button
Mounting Holes for LCD
Magnifier Attachment Rails
Playback Button
C
ustom / Delete Button
*Handle brackets and Shutter release extension are not displayed.

12
1/4”
-
20UNC Tripod Socket*
*The maximum length of screws that can be used with the tripod socket is 4mm
Sacrificial Zinc Anode

13
O
PENING AND
C
LOSING THE
H
OUSING
To open t e ousing:
1. Press the housing lock safety button. 2. Turn the housing lock anti-
clockwise for 270°, until the lock
reaches the “Open” position as
shown.

14
To close t e ousing:
When closing, make sure there is nothing caught between the closing surfaces of the two hal es
of the housing.
3. Close the housing while the
housing lock is in the “Open”
position.
4. Turn the housing lock clockwise
for 270° until the lock reaches
the “lock” position as shown.
Confirm that the white indicator
line on the safety button is
isible.

15
1. After erifying that the main O-ring is in
good condition, lightly coat it with the
lubricant pro ided.
2. Make sure the O-ring groo e located in
the front part of the housing is free from
any foreign material; the groo e can be
cleaned with the aid of a microfiber cloth.
3. Place the main O-ring into the groo e,
first at the corners, then the whole
perimeter.
4. Setting up the moisture alarm:
1. Ensure that remo e an insulation
film before install a battery.
Then install the battery pro ided
into the battery compartment on
the circuit board inside the housing.
P
REPARATION OF THE
H
OUSING

16
Battery Installation
Insert the battery as shown abo e and
then press down the battery.
P
ress
To remo e the battery, press the metal
plate as indicated and the battery will pop
out.
P
ress
*
Use only recomme
nded battery with this product

17
2. Switch the alarm on. The LED
light will flash blue once and turn
blue for fi e seconds indicating
the battery is normal. Then it
goes into flashing blue light
standby mode.
3. Test the alarm by connecting the
two wires near the bottom of the
housing with a damp cotton bud;
the alarm should start gi ing out
a repeating “beep” sound along
with a flashing red light. The
“beep” sound and the light
should keep on going for 5
seconds after the remo al of the
damp cotton bud.

18
Optional vacuum valve:
Vacuum al e can be attached to the housing ia one of the accessory port for conducting a
acuum seal test. Please refer to the manual of the acuum al e for details of the operation.
LED status identification:
On start up
LED indicator Status
Flash “Blue” light once Indicates a 2nd generation PCB
Steady "Blue" light Battery is normal, goes into flashing "Blue"
light standby mode after 5 seconds.
"Blue" and "Red" lights
alternating
Battery low. Replace battery as soon as
possible. Goes into standby mode after 5
seconds.
Steady "Red" light Battery empty, replace battery.

19
LED indicator Status
Flashing "Blue" light
Standby mode. The moisture alarm is acti e,
and the system is ready for acuum indication
whene er a acuum is detected.
Flashing "Red" light
with beeping sound Moisture is detected.
Flashing "Yellow" light Some acuum is detected, target acuum le el
is not reached.
Steady "Green" light Target acuum le el is reached.
Rapidly flash "Yellow"
light
Vacuum is dropping. (Will occur only after
target acuum le el is reached)
Rapidly flashing "Red"
light
Vacuum is totally lost. Circuit stalled until
switched off. (Will occur only after target
acuum le el is reached)
After start up

20
To install t e camera into to t e ousing:
1. Place the camera inside the housing as shown.
Make sure to put HDMI cable under the cable holder of the internal housing when
HDMI cable is required as shown.
2. Close the housing and confirm that all the controls of the housing are correctly
engaged.
*Wit out HDMI cable
*Wit HDMI cable
I
NSTALLING THE
C
AMERA