
Current as of 2022-03-23
37151 SFE2470GM
37151 SFE2470GM37151 SFE2470GM
37151 SFE2470GM-
--
-Z Zoom Gear
Z Zoom Gear Z Zoom Gear
Z Zoom Gear
for Sony SEL2470GM FE 24
for Sony SEL2470GM FE 24for Sony SEL2470GM FE 24
for Sony SEL2470GM FE 24-
--
-70mm
70mm 70mm
70mm
F2.8 GM
F2.8 GMF2.8 GM
F2.8 GM
Instruction Manual
OREWORD
OREWORDOREWORD
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recogni e the
requirements of professional as well as amateur underwater
photographers and fulfill them through the innovative designs of our
products. We strive to achieve a high level of user-friendliness by
allowing stress-free installation and easy operation of all important
functions of the camera.
Please read this manual carefully before using the product, this will
maximi e its performance as well as its lifetime.
ARRA TY
ARRA TYARRA TY
ARRA TY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for
consumer use.
This warranty only applies to products purchased from
authori ed NAUTICAM dealers and does not extend beyond the original
retail purchaser.
To return your product for service, please contact your regional
authori ed service center(s). Please note that this warranty only applies
when the product is purchased in the territory where the service center is
located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthori ed modifications and/or repairs of our products will
automatically invalidate the warranty.
DE TIFICATIO OF
DE TIFICATIO OF DE TIFICATIO OF
DE TIFICATIO OF
ARTS
ARTSARTS
ARTS
OU TI G THE
OU TI G THE OU TI G THE
OU TI G THE
EAR O A LE S
EAR O A LE SEAR O A LE S
EAR O A LE S
1. Insert the plastic C-ring for oom gear as shown and place it
over the lens
2. Insert the SFE2470GM-Z Zoom Gear on the plastic C-ring
until it reaches the flange of the plastic C-ring.
3. The tightness between the both gears and the lens can be
adjusted by removing or adding rubber grips on either sides of
the plastic C-ring, spare rubber grips are included in the package.
Plastic C-ring for
SFE2470GM-Z Zoom Gear
SFE2470GM-Z Zoom Gear