Nav TV OPV-1A3G User manual

Telephone: + 44 (0)8445 783 783
Fax: + 44 (0)1446 77 22
47
[email protected]
Distribution Centre
Unit 21B Vale Business Park
Llandow, Vale of Glamorgan
CF71 7PF
OPV-1A3G
NAV TV (Europe) LTD
NAV TV (Europe) LTD
VIDEO IN MOTION & AV INPUT
ALL AUDI 3G MMI
Without TV Tuner
e11*72/245*2004/104*4020*00
RoHS 2002/95/EC—2002/96/EC
Disclaimer
NAV TV (Europe) Ltd is not liable for any incidental, consequential or indirect damages. In case of erratic behavior of the vehicle’s
electrical system please disconnect the NAV TV product and contact our technical support Team. NAV TV (Europe) Ltd does not assume
liability for any diagnostic fees.
When the interface is fitted the “video in motion”
feature will be permanently active, there is no
procedure to activate or de-activate the feature.
To activate the new A/V source press the
“MEDIA” button then the source button (shown
below)
Then select “TV tuner” from the on screen list
(shown below)
NOTE,
it is possible to select the new input via the
“External AV input” and AV1 / AV2 menu,
however this interface only allows 1 AV input
OPERATING INSTRUCTIONS
Telephone: + 44 (0)8445 783 783
Fax: + 44 (0)1446 77 22 47
[email protected]
Distribution Centre
Unit 21B Vale Business Park
Llandow, Vale of Glamorgan
CF71 7PF
NAV TV (Europe) LTD
Disclaimer
NAV TV (Europe) Ltd is not liable for any incidental, consequential or indirect damages. In case of erratic behavior of the vehicle’s
electrical system please disconnect the NAV TV product and contact our technical support Team. NAV TV (Europe) Ltd does not assume
liability for any diagnostic fees.

All connections are made at the DVD player
Unit in the front centre or glove box of the
vehicle
All units are removed with VW/AUDI radio
removal tools Removing the unit without the
correct keys may cause damage and
problems when re-fitting the unit.
LOCATION & REMOVAL
Remove the optical cable from the unit, shown
below (shown in Red circles below)
DVD PLAYER
Next insert the supplied female optical cable into
the factory harness optical plug.
Then insert one of the supplied male optical plugs
into the CD Changer / DVD player.
Then insert the other male optical plug into the
interface.
Using the power supply found in the factory power
connector (shown in green circle above)
Connect RED to 12v+ Permanent
Connect BLACK to 12v– Ground
INSTALLATION
Connect the supplied video harness to the
GREEN Fakra connector (shown in blue circle
below
Connect your video cables to the female YEL-
LOW Phono.
Connect your audio cables to the female RED
and WHITE Phono
INSTALLATION