NCR VOYIX 7772-K200 Manual

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited
7772-K200
Issue A
Tamper Resistant Cover, Remote I/O
Kit Instructions

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
2
Copyright
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR CX7 All-in-One POS (7772) is a trademark of NCR
Corporation in the United States and/or other countries. Other product names mentioned in this publication may be
trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Java is a registered trademark of Oracle and/or its affiliates.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under
the terms and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware
become available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some
instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR
representative or NCR office for information that is applicable and current.
Copyright © 2020–2024
By NCRCorporation
Global Headquarters
864 Spring St. NW
Atlanta, GA 30308
United States
All Rights Reserved

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
3
Table of Contents
Copyright 2
Tamper Resistant Cover, Remote I/O 5
Kit Contents 5
Installation Procedure 6

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
4
Revision Record
Issue Date Remarks
A Aug 2020 First Issue

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
5
Tamper Resistant Cover, Remote I/O
This kit provides a Tamper Resistant Cover for the Remote I/O Chassis of the NCR CX7 All-
in-One POS (7772) or NCRCX5 All-in-One POS(7773).
Kit Contents

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
6
Installation Procedure
1. Install the Tamper Resistant Cover on the Remote I/OChassis using two (2) screws.
2. Loosen the captive screws of the Tamper Resistant Cover and lift the Top Cover to
open.

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
7
3. Connect the cables to the I/O.
USBCentric(Retail) Remote I/OChassis
Callout Port Name
1 RJ50 Serial (Enhanced UART)
2 Dual USB 3.0
3 DisplayPort
4 DB9 Serial (Standard UART)
5 LAN In
Note
Connect to Ethernet Network
6 LANOut
Note
Connect to the CXHead
7 USB-C
8 LED
9 24VPower In
10 USB12V
11 USB24V
12 Cash Drawer

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
8
Serial Centric (Hospitality) Remote I/OChassis
Callout Port Name
1 RJ12 Serial
lCOM1 (Enhanced UART)
lCOM2 (Standard UART)
lCOM3 (Enhanced UART)
lCOM4 (Standard UART)
2 Cash Drawer A
3 Cash Drawer B
4 DisplayPort
5 LANIn
Note
Connect to Ethernet Network
6 LAN Out
Note
Connect to the CXHead
7 USB-C
8 LED
9 24VPower In
10 USB24V
11 USB12V

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
9
Callout Port Name
12 Dual USB 3.0
13 RJ45 Serial
lCOM5 (Enhanced UART)
lCOM6 (Standard UART)
4. Close the Top Cover and tighten the captive screws.