NEC Pinwriter P9XL User manual

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 1 of 10
P9XLSpecifications

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 2 of 10
SwitchSettings

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 3 of 10
Parallel RS-232
Interface Diagrams and Pin Assignments
SwitchSettings(Cont'd)
Note: Please refer to FastFacts Document 273905 for Serial Cable configurations

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 4 of 10
Softwareand DriverInformation
P960 Select P9 or Epson LQ-1500
P965 Select P9 or Epson LQ-1500
Note: If Switch 3-6 is in the off position choose Diablo 630 as a Driver.
Drivers for the P9XL can be obtained by calling the NEC BBS
at 508-635-4706 and downloading the following filenames:
NECP24.EXE Windows 3.1
W3PINDRV.EXE Windows 3.0
OS2PIN.EXE OS/2 2.X OS/2 Warp
Error and Status Codes

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 5 of 10
P9XLMajorAssemblies
Note: Due to the age of this printer some parts may be limited. Please check with our Parts Department
at 1-800-388-8888 for availability.

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 6 of 10
P9XLMechanismAssembly

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 7 of 10
Control and Escape Codes Epson/IBM Command Set

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 8 of 10
Epson/IBMCodes(Cont'd)

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 9 of 10
Control and Escape Codes Diablo Command Set

Comprehensive Support Document
P9XL Revision Date: 10/5/95
Document: 273913
Page 10 of 10
DiabloCodes(Cont'd)