NEC NP-M300W User manual

www.necdisplay.com
Portable Projectors
M Series
M260X, M260W, M300X and M300W digital projectors
Easy to use and at the right price,
M Series projectors provide all the
essential features that you need to
connect with your audience.
ESSENTIAL FEATURES FOR EDUCATIONAL FACILITIES
° Plug and Play intuitive setup and operation
° Bright images easily viewed in any application
° Versatile, color-coded connections to computer, video sources and external
monitor
° Automatic keystone correction technology instantly projects a square image
even when the projector is set up at a steep offset angle to the screen
° AutoSense™ intuitively syncs the projector with most computer signals and
features one-touch image optimization
° One-touch source changes and complete menu control using the intuitive
projector keypad
° Powerful 10-watt speaker provides volume needed for large rooms
°Remarkable contrast ratio (2000:1) enhances your image
°With XGA and WXGA native resolutions, high brightness up to 3000 lumens and patented NEC technologies, M Series
projectors display impressive image quality
Top cover lamp
change provides
for easy lamp
changes without
removal of the
projector from
the mount.
ADVANCED NETWORKING CAPABILITIES
° Integrated RJ45 connection for quick connection to the
LAN (10/100 base-T capability)
° Remote diagnostics enable the user to monitor and make
adjustments to the projector remotely
° PC CTL 4.0 controls the power switching input selection
and other functions while managing lamp usage and a
variety of other vital information over the network. Email
notification and projector scheduling for better asset
management is included with the software.
Image Express Lite
Dedicated projector software provides
wired and wireless data transmission
via peer-to-peer or over the network.
Wireless
LAN
module
(optional)

DESIGNED WITH THE ENVIRONMENT IN MIND
°Extended lamp life with ECO Mode™ technology increases lamp life up to 6000 hours, while lowering power consumption
°Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
°Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
°Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
°Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with
no cooling required after shutdown) ensures efficient energy usage
°Sleep timer can be set to automatically turn off the projector at set countdown times
°Low power consumption (0.2W in stand-by mode) minimizes energy costs
ADVANCED SOFTWARE FEATURES
6000-hour filter life
NEC is committed to
designing its products to
provide long lifecycles.
This commitment even
extends to components
within its products,
including the improved
filter. This virtually
maintenance-free filter
reduces the frequency
at which cleaning
is required, thereby
decreasing your total
cost of ownership.
Active lens cover
This cover enables presenters to immediately mute
the audio and video, then seconds later lower the
lamp brightness to 25% for a short period of time.
Geometric Correction
Projecting an image isn’t confined to
a standard flat screen or wall with the
NEC M Series. Geometric correction al-
lows these models to project an image
on spheres, cylinders, corner angles
and many more non-standard surfaces.
Cornerstone
Enhanced keystone correction allows for horizontal, vertical and diagonal image
correction for aligned images even when the projector is set up at an angle to the
screen.
Virtual Remote™ (DDC/CI)
Used over the VGA cable, you can control the projector
directly from a computer without the need for additional
control cables.

GET CONNECTED WITH A WIDE SELECTION OF INPUTS
°Dual computer inputs ensure quick switching between presentations
°Four audio inputs (two mini stereo, R/L and HDMI)make it easy to add sound to enhance your presentations
USB input
Your connection options go even further with the
M Series. Connect your laptop or PC directly to
the projector using the USB port and a standard
USB cable.
Remote
control
Easy control
from remote
allows you
to adjust
lamp mode,
aspect ratio,
volume and
image all with the
touch of a button.
Variable audio-out
This input enables
the remote control
to be used to
adjust volume
of self-powered
external speakers that are connected to the
projector. In stand-by mode, the audio-out
stays active, allowing the last input used to
pass to the self-powered external speakers.
HDMI input
Among the M Series’
wide selection of
inputs is an
HDMI w/HDCP
for connecting to
high-definition
sources such as
Blu-ray players, cable boxes, satellite
receivers and personal computers.
DICOM SIM
DICOM Simulation
enables users
in medical
environments to
display accurate
diagnostic images.
On a
green wall...
BEFORE
auto wall correction
AFTER
auto wall correction
Built-in wall color correction presets
These provide for adaptive color tone
correction to display properly on non-
white surfaces.
BUILT-IN SOFTWARE
USB Viewer
In instances when you’d prefer
to leave your laptop behind
for a presentation, M Series
projectors can deliver a solution.
Using the presentation conversion
software included with your projector,
simply place your file onto a USB drive
and plug it into the projector’s USB port.
This allows you to display images stored
as .jpgs from optional USB memory.

NEC Display Solutions
500 Park Boulevard, Suite 1100
Itasca, IL 60143
866-NEC-MORE
OPTICAL
Display Technology
Native Resolution
Maximum
Light Output (lumens)
Contrast Ratio
Lamp Type
Lamp Life (up to)
Screen Size (diagonal)
Throw Ratio
Projection Distance
Projection Angle
Lens
Zoom
Focus
F-#, f-#
Keystone Correction
SIGNAL COMPATIBILITY/CONNECTIVITY
Scan Rate
Supported Video Standards
SD/HD Video Signal Compatibility
HDMI Signal Compatibility
PC Signal Compatibility
Macintosh Compatibility
Input/Output Terminals
RGB 1 (analog)
RGB2 (analog)
RGB3 (digital)
RGB4 (digital)
Video 1
Video 2
Audio 1
Audio 2
Audio 3
Audio Out
Monitor Out
Audio
External Control
Sync Compatibility
ELECTRICAL
Power Req.
Input Current
Power Consumption (Normal/ECO Mode/
Standby Mode/Power Saving Mode
MECHANICAL
Installation Orientation
Dimensions (WxDxH)
Net Weight
Fan Noise
Regulations
ENVIRONMENTAL
Operational Temp
Humidity
Storage
ACCESSORIES
NP01MR
NP02LM1
SPKR30
ADP-CV1E
MP300CM
NP01UCM
AEC0609
AEC12018
AEC0203
AEC0305
SCP100
NP15LP
NP16LP
RMT-PJ29
WARRANTY PROGRAMS
NECEW1-MP
NECEW2-MP
ADVEXON1-MP
ADVEXON2-MP
NECECO
Advanced AccuBlend, ECO Mode and Virtual Remote are trademarks
of NEC Display Solutions. HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC. All other brand or product names are trademarks or regis-
tered trademarks of their respective holders. Product specifications subject
to change. 2/11 ver. 6.
©2011 NEC Display Solutions of America, Inc. All rights reserved.
M260X: 0.63” LCD
M300X: 0.63” LCD with MLA
M260W/M300W: 0.59” LCD with MLA
M260X/M300X: XGA 1024 x 768
M260W/M300W: WXGA 1280 x 800
UXGA 1600 x 1200
M260X/M260W: 2600 normal / Eco = approx. 80% of normal mode
M300X/M300W: 3000 normal / Eco = approx. 80% of normal mode
2000:1
M260X/M260W/M300X: 180W AC / 145W eco
M300W: 230W AC / 170W eco
M260X/M260W/M300X: 5000 hours normal / 6000 hours eco
M300W: 4000 hours normal / 5000 hours eco
25 - 300 in., 0.64 - 7.6m
1.3 - 2.2
M260X: 2.1 - 45.3 ft. / 0.65 - 13.8m
M300X: 1.9 - 45.3 ft. / 0.6 - 13.8m
M260W/M300W: 2.3 - 47.8 ft. / 0.69 - 14.6m
M260X/M300X: 6.5 - 6.8° tele / 10.7 - 11.4° wide
M260W/M300W: 6.5 - 6.8° tele / 10.8 - 11.4° wide
1.7
Manual
F=1.7 - 2.1, f=17.5 - 29mm
Automatic or manual +/- 30º
Horizontal 15 - 100 kHz / Vertical 50 - 120 Hz
NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM
1080i, 1080p, 720p, 576p, 576i, 480p, 480i,Y/Cb/Cr component (with optional
adapter – ADP-CV1E)
VGA, SVGA, XGA, WXGA, SXGA, 480p, 576p, 720p, 1080i, 1080p
VGA, SVGA, XGA, SXGA, SXGA+, UXGA
Yes
15 pin
15 pin
HDMI
USB A Type
RCA
S-Video
L/R RCA (shared by video sources)
1/8 in. stereo
1/8 in. stereo
mini stereo (Variable audio out)
Yes
10W speaker
RS-232, IR, LAN, DDC/CI, USB, Wireless LAN (optional)
Separate Sync / Composite Sync / Sync on G
100 - 240V AC, 50/60Hz
M260X/M260W/M300X: 2.8A / 1.2A
M300W: 3.4A / 1.5A
M260X/M260W/M300X: 248W / 198W / 8W / 0.2W
M300W: 311W / 239W / 8W / 0.2W
Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
13.4 x 10.1 x 3.9 in. / 339 x 257 x 99mm
M260X/M260W/M300X: 6.4 lbs. / 2.9 kg
M300W: 6.6 lbs. / 3 kg
M260X/M260W/M300X: 34 dB normal / 27 dB eco
M300W: 35 dB normal / 29 dB eco
UL60950-1, CSA60950-1, FCC Part 15 Class B, ICES-03 Class B,
NOM-001-SCFI-1993
41° - 104°F / 5° - 40°C
20-80% non-condensing
14° - 122°F / -10° - 50°C
IR receiver enables PJ remote to control PC and MAC functions
802.11b/g/n wireless LAN adapter
Amplified 30 watt speaker
Component video to VGA adapter
Ceiling mount
Universal ceiling mount for projectors weighing less than 40 pounds
6 to 9 inch adjustable extension column for use with projector mount
12 to 18 inch adjustable extension column for use with projector mount
2 to 3 foot adjustable extension column for use with projector mount
3 to 5 foot adjustable extension column for use with projector mount
Adjustable suspended ceiling plate for use with ceiling mount
Replacement lamp for M260X, M260W and M300X
Replacement lamp for M300W
Replacement remote control
Extends term of parts and labor warranty to 3 years
Extends term of parts and labor warranty to 4 years
Extends term of InstaCare service program to 2 years
Extends term of InstaCare service program to 3 years
Projector recycling program, disposal certificate
UNIQUE FEATURES
Advanced AccuBlend ensures detailed images
when non-native resolution sources are connected
to the projector
Built-in closed captioning enables decoding and
display of text information from a video
64-step image magnification with location control
Countdown sleep timer can be set to automatically
turn off the projector
Direct power-off provides instantaneous shutdown
of projector
WARRANTY
Registered owners receive a 2-year parts and labor
warranty including the first year of InstaCare. The
lamp is covered for one year or 500 hours - which-
ever comes first. InstaCare provides the original
owner one year of either limited 3-business-day
repair/return or next-business-day exchange.
IN THE BOX
Carrying case, remote control, batteries, power cord,
RGB signal cable, built-in lens cover, user’s manual
on CD-ROM, quick start guide, product registration
card
13.4”
(339mm)
10.1”
(257mm)
3.9”
(99mm)
Specifications for M260X, M260W, M300X & M300W
Additional accessories are available, including screens, carts, mount accessories and replacement cables.
Visit www.necdisplay.com for details.
Ordering Model Numbers
NP-M260X
NP-M260W
NP-M300X
NP-M300W
Other manuals for NP-M300W
1
This manual suits for next models
7
Other NEC Projector manuals

NEC
NEC MT1075 Series User manual

NEC
NEC NP-UM330W Series User manual

NEC
NEC NP-V311W User manual

NEC
NEC LCDGT2150 User manual

NEC
NEC V332X User manual

NEC
NEC U321H User manual

NEC
NEC M282X User manual

NEC
NEC NP-PH1201QL User manual

NEC
NEC WT610 Series User manual

NEC
NEC GT950 - MultiSync XGA LCD Projector Assembly instructions