NENKO 25002477 User manual

1. Product
Gel Floor Tile - Red + Adaptor
2. Product Code
25002477
3. Description
A great visual experience that encourages everyone to move. Each illuminated tile is filled with liquid
gel. Step or move on the tile and make sure the liquid gel shifts in a particular pattern. The tile is
resistant to jumping and strenuous use by children and adults, as well ass the weight of a wheelchair.
the tiles can also be incorporated into a customized pvc floor mat. Antislip
4. Colour
Red
5. Sensory simulations
Vision
6. Technical Data
Size: 50 x 50 cm per tile
Adapter: AC100 240V / DC12V 3A (One adapter can hold up to 4 units)
Max power consumption: 8W / pc.
Lighting: 42 LEDs
Electricity specification: Working voltage: DC 12V ± 0.5V
7. Contents
Tile
Corner protectors
Adapter
8. Start-up
1. As one unit
Insert the adapter into the tile, then connect the plug to the adapter, plug it in and turn it on.
2. Two or more units
First check that each unit operates independently according to the instructions above. Once they all
work independently, you can connect all units together through the connectors on the base of each
tile. Assemble these connectors and connect one of the tiles to the adapter, then insert the plug into
the adapter and connect it to the wall.
3. See included in your package 4 corner protectors to be used. These should be glued to every
corner of every tile or series of tiles for your own protection. These are easy to apply, just take off
the back and hold it firmly on the corner of the tile until it is tight.

9. Maintenance
In order to enjoy this sensational product for as long as possible, we ask you to follow the
maintenance instructions below:
•Use on a flat and level surface, away from water.
•Do not drop because the item may break.
•Do not drop anything on the object as it may crack.
•Do not use in direct sunlight.
•Place hot objects on the article
•Maximum load: 150 kg.
•The recommended temperature for the tile is between minus 5 degrees to 50 degrees.
•This item is not recommended to be used as a floor tile with shoes. Heavy traffic will wear
and discolor / scratch the product on the surface.
10. Cleaning
•The tile can be cleaned with a damp sponge and / or mild disinfectants and mild cleaning
agents. Avoid getting water in the electronics. We recommend that you unplug the device
before cleaning it. The item is designed for easy cleaning.
•The anti-slip backing should only be cleaned with a dry cloth (risk of loosening).
•Note: The liquid is safe and non-toxic, but clean all areas of your skin that have touched the
liquid in case you are allergic to any of the ingredients.
•In case the tile cracks and the liquid leaks on a surface it can be cleaned.
•If the liquid leaks onto a carpet, we recommend that you put an absorbent cloth over the
spilled product to absorb the excess liquid. We recommend that you gently clean the area
with warm water and dish soap with a clean sponge. Dab as much of the excess liquid as
possible with the sponge first to dilute the colorant, rinse after each cleaning. You may need
to do this one, two or even three times, depending on how much liquid has been spilled
Please visit our website www.nenko.com for more information.