NENKO 17905112 User manual

1. Name of the product
Optic fiber strand 100 tubes, 2m
2. Product code
17905112
3. Description
Maximum safety in fiberglass wires, these fiberglow wires made of plastic are the safest option.
However, all fiber mist products should only be used under supervision. Only works in combination
with a light source (not included). Robust, clear and durable.
4. Contents
1x fiber optic strands
A light source is necessary. This must be purchased separately (18517). Therefore, also read the
separate instructions for use for the light source. For added safety, the ends of the fiber mist wires
have protected tops.
5. Sensory stimulations
See
6. Safety
Fiber mist products are a constant source of safe tactile and visual stimulation. However, always use
them only under professional supervision. Even though it is safe to stroke the threads along the face,
never put them in the mouth.
Periodically clean the fiber mist with a clean damp cloth. However, first switch off the light source.
7. Installation
1. Remove the packaging and temporary bonds that keep the fibers tied together.
2. Connect the fiber optics to the light source –to do this, insert the button (metal cylinder at
the other end of the wires) into the port (metal hollow cylinder) of the light source. See also
the instructions for use of the light source. The metal knob is 30mm in diameter, which
means that this fiber mist fits all Nenko light sources.
8. Start to use
When using a light source with a color wheel, the fiber optics will show a constant color change over
the entire length. The changing colors are visually stimulating and encourage focusing. At the same
time, they are soothing and relaxing.

The fiber optic strands provide a fascinating tactile stimulation. Some ideas for use are:
1. For example, attach the light source to the wall or in a lined base, with the wires facing down
for the effect of a waterfall.
2. Spreads the wires out, and shows that they are safe to touch.
3. Fan out the tops of the threads, to spread a colored light over the hands or face.
4. Spread the wires over a mat and let a person lie or sit on it.
5. Wrap the threads around the limbs or the whole body.
6. Weve the threads through a sweater, apron or net, which can then be draped on a person.
7. Use the fiber optic interactively with our wireless switch controller.
9. Maintenance
Fiber mist opticss provide great visual and tactile stimulation. However, these products should
always be used under targeted adult supervision. Fiber mists are safe when used properly under
supervision. Nenko cannot take any liability for damage or injury caused by incorrect use of this
product. These fiber optic strands are slightly thicker than the standard fiber optics.
The fiber optic strands can be cleaned by a damp cloth with possibly a mild cleaningagent.
NOTE: make sure that the metal button does not become damp. Dry the strands thoroughly before
use. Do not hang the fiber strands in water.
For more information, please visit our website www.nenko. com visits.