LEGRAND 0 648 88 User manual

LE10319AA
Connected lighting micromodule
0 648 88
This pack is a connected accessory which requires you to buy and install the «... with
Netatmo». connected starter pack first.
Pack contents
Connected
lighting micromodule
Characteristics
**
R L
LED
100-240VAC
50/60Hz
1x1.5mm
240VAC Max. 300W *100W 250 VA 250VA 250VA
100VAC Max. 150W *50W 125 VA 125VA 125VA
+45°C
+5°C
In default mode (on/off), this switch works with the following types of bulb:
(*)
Or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the same
type and make.
(**)Use only transformers intended for operation with electronic switches. Take account or
transformer losses for power calculations. Transformers should be charged to over 60%
of their rated power.
2
To install or replace a remote switch, only use the product:
Do not use: a connected switch (with dimmer option) to control a connected
lighting micromodule.
x 1
Connected lighting micromodule
To control your micromodule:
At least one wireless lighting switch from the «...with Netatmo”connected ranges
must be paired with it.
To create your wireless lighting two-way switch:
Add one or several wireless lighting switches from the «...with Netatmo”connected
ranges.
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can
lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be
opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand accessories.
You can keep the existing push buttons or replace them with
wireless controls.
Before you start: wiring precautions

LE10319AA
Connected lighting micromodule
0 648 88
This pack is a connected accessory which requires you to buy and install the «... with
Netatmo». connected starter pack first.
Pack contents
Connected
lighting micromodule
Characteristics
**
R L
LED
100-240VAC
50/60Hz
1x1.5mm
240VAC Max. 300W *100W 250 VA 250VA 250VA
100VAC Max. 150W *50W 125 VA 125VA 125VA
+45°C
+5°C
In default mode (on/off), this switch works with the following types of bulb:
(*)
Or 10 bulbs max. For comfortable lighting, we recommend using bulbs of the same
type and make.
(**)Use only transformers intended for operation with electronic switches. Take account or
transformer losses for power calculations. Transformers should be charged to over 60%
of their rated power.
2
To install or replace a remote switch, only use the product:
Do not use: a connected switch (with dimmer option) to control a connected
lighting micromodule.
x 1
Connected lighting micromodule
To control your micromodule:
At least one wireless lighting switch from the «...with Netatmo”connected ranges
must be paired with it.
To create your wireless lighting two-way switch:
Add one or several wireless lighting switches from the «...with Netatmo”connected
ranges.
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can
lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be
opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand accessories.
You can keep the existing push buttons or replace them with
wireless controls.
Before you start: wiring precautions

3
Install the connected lighting micromodule
The «... with Netatmo» connected lighting micromodule can be easily installed in a ceiling
light or in wall lights.
Wire the connected lighting micromodule
Option: remote control
wiring using a non-
illuminated mechanical
pushbutton.
x 5 Max.
Frequency bands: 2.4 - 2.4835 GHz
Power level: <100mW
Max. 15m
Make sure that the power is off before
continuing with the installation.
OFF
Switch off the power
at the main circuit
breaker
Make sure that the
power is off before
continuing with the
installation.
N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow
To add a connected product to your connected installation,
you should follow the instructions:
- in the user guide in your connected starter pack
- in the Legrand Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these
instructions complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available
on the following website:
www.legrandoc.com
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr

3
Install the connected lighting micromodule
The «... with Netatmo» connected lighting micromodule can be easily installed in a ceiling
light or in wall lights.
Wire the connected lighting micromodule
Option: remote control
wiring using a non-
illuminated mechanical
pushbutton.
x 5 Max.
Frequency bands: 2.4 - 2.4835 GHz
Power level: <100mW
Max. 15m
Make sure that the power is off before
continuing with the installation.
OFF
Switch off the power
at the main circuit
breaker
Make sure that the
power is off before
continuing with the
installation.
N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow
To add a connected product to your connected installation,
you should follow the instructions:
- in the user guide in your connected starter pack
- in the Legrand Home + Control application (Settings/Add a new product section)
- or consult the user manual on legrand.fr
SIMPLIFIED EU DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these
instructions complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available
on the following website:
www.legrandoc.com
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr