Middle Atlantic Products VTC Series User manual

VTC-WS-32X12SL Work Surface
VTC Series
Instruction Sheet
PRODUCT FEATURES
Thank you for purchasing a VTC-WS-32X12SL work surface.
THANK YOU
• 32” W X 12” D slate finished work surface.
• #2 Phillips Screwdriver
• Socket Set
I-00587 Rev -
TOOLS REQUIRED

10-32 Flange Nuts
(Qty 4)
10 x 5/8” Wood Screws
(Qty 4)
10-32 x 1/2” Flat Head
Phillips Screws
(Qty 4)
Work Surface
(Qty 1)
Brackets
(Qty 2)
Page 2
HARDWARE/ITEMS SUPPLIED
Accessing interior of VTC
INSTALLATION
1) Lock rear wheels. (FIGURE A)
FIGURE A
Push Lever
To Lock
FIGURE B
2) Remove front and rear access panels. (FIGURE B)
NOTE: If necessary, refer to Video Tele-Presence Center VTC Series Instruction Sheet I-00579 for
additional details.

Page 3
INSTALLATION (Continued)
3) Select mounting height of work surface from available mounting holes and install right side bracket
using (2) 10-32 x 1/2” flat head screws and (2) 10-32 flange nuts as shown. (FIGURE C)
Flat Head
Screws (2)
10-32 x 1/2” Flange Nuts
(2) 10-32
Right Side
Bracket
4) Install left side bracket as described above.
5) Re-install front access panels.
6) Install work surface on left and right
brackets using (4) 10 x 5/8” wood screws.
(FIGURE D)
(NOTE: Work surface is pre-drilled
for wood screws.)
7) Re-install rear access panel.
FIGURE C
FIGURE D
Wood Screws (4)
10 x 5/8”
Work
Surface
Left
Bracket
Right
Bracket

Page 4
WARRANTY
Middle Atlantic Products (the "Company") warrants the VTC-WS-32X12SL Work Surface VTC Series to be free from defects in material or
workmanship under normal use and conditions for the lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty
shall be limited, at the Company's option, to either (a) return of and refund of the price paid for, or (b) repair or replacement at the
Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or
any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly,
installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax [phone] / International Voice [phone] - Fax [phone]
middleatlantic.com - [email protected]
Middle Atlantic Canada
Voice 613-836-2501 - Fax [phone] / middleatlantic.ca - [email protected]
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.