Neomitis RT1 RF User manual

RT1 RF
WIRELESS DAILY PROGRAMMABLE
ROOM THERMOSTAT AND RECEIVER
Pack contains ....................................................................................1
Installation - Receiver .......................................................................1
Mounting of wall mouting plate.......................................................................1
Wiring ...................................................................................................................1
Mounting of the receiver...................................................................................2
Installation - Thermostat....................................................................2
Installing batteries...............................................................................................2
Mounting of thermostat.....................................................................................2
Pairing procedure..............................................................................3
Installer settings .................................................................................3
Advanced installer setting ................................................................................3
Troubleshooting .................................................................................4
7HFKQLFDOVSHFLÀFDWLRQV ...................................................................4
RTE1RFA NEO ENG FP V04 26 06 2015
WIRING
1
INSTALLATION INSTRUCTIONS
All wiring must be in accordance with IEE regulations. This product is for
À[HGZLULQJRQO\
[[
[ [ [
[
Screw AnchorAA Batteries (LR6)
Thermostat Receiver Thermostat table stand
Screws
)RUEHVWSHUIRUPDQFHGRQRWPRXQWWKHUHFHLYHURQPHWDOZDOOER[HV
DQGOHDYHDWOHDVWFPGLVWDQFHIURPDQ\PHWDOREMHFWVLQFOXGLQJZDOO
ER[HVDQGERLOHUKRXVLQJ
MOUNTING OF WALL MOUTING PLATE
$OOHOHFWULFDOLQVWDOODWLRQZRUNVKRXOGEHFDUULHGRXWE\D
VXLWDEO\TXDOLÀHG(OHFWULFLDQRURWKHUFRPSHWHQWSHUVRQ,I\RX
are not sure how to install this thermostat consult either with a
TXDOLÀHGHOHFWULFLDQRUKHDWLQJ(QJLQHHU'RQRWUHPRYHRUUHÀW
WKHUHFHLYHURQWRWKHEDFNSODWHZLWKRXWWKHPDLQVVXSSO\WRWKH
V\VWHPEHLQJLVRODWHG
PACK CONTAINS
INSTALLATION - RECEIVER
N= Neutral
L= Live
1= Not used
2= Normally closed
3= Common
4= Normally open
2NL1 43
7KHUHFHLYHULVÀ[HGRQWKHZDOOZLWKWKHVWDQGDUGZDOOSODWHZKLFKLV
supplied with the product.
1- Unscrew the 2 screws under the
receiver.
2- Remove the wall plate from the
receiver.
[
3- Secure the wall plate with the
two screws provided using the
horizontal and vertical holes.
4- In case of surface mounting,
a knock out area is provided
on the wall plate and on the
corresponding area of the
receiver.

2
• On the wall
MOUNTING OF THERMOSTAT
1- Unscrew the 2 screws under the
thermostat.
2- Remove the wall plate from the
thermostat.
[
1- Remove the batteries cover
which is placed on the front of
thermostat.
2- Insert the 2 batteries AA sup-
plied. Note the correct polarity
according to the engraving on
the thermostat when inserting
the batteries.
3- Replace the batteries cover.
MOUNTING OF THE RECEIVER
1- Replace the receiver on the
wall mounting plate.
2- Secure the receiver by screwing
the both locking screws under
the receiver.
[
3- Secure the wall plate with the
two screws provided using the
horizontal and vertical holes.
4- Replace the thermostat on the
wall mounting plate.
5- Secure the thermostat by
screwing the locking screws
under the thermostat. [
5HFRPPHQGHGORFDWLRQVIRU\RXUWKHUPRVWDW
To ensure that your thermostat provides accurate readings and controls
HIIHFWLYHO\LWPXVWEHLQVWDOOHGDSSUR[LPDWHO\PDERYHÁRRUOHYHORQ
an inside wall, away from direct sunshine and any other sources of heat
or cold such as radiators, cold draughts, etc.
• On the table stand
1- Insert the 2 pins inside the
wallplate and slide on the
stand .
2
1
2- Fold the stand and lock it into
the wallplate.
2 tilts possibilities
30° 37°
INSTALLING BATTERIES
INSTALLATION - THERMOSTAT

3
NB: In order to ensure proper operation of the product, ensure that the
thermostat is not positioned near to an area which could be affected by
interference from another source. E.g.: a wireless transmitter or receiver,
TV, PC, etc.
Important: The thermostat measures the temperature of the place where
it is installed. It does not take into account the temperature differences
WKDWPD\H[LVWEHWZHHQGLIIHUHQWORFDWLRQVLQWKHKRXVHLIWKHWHPSHUD-
ture is not uniform.
ADVANCED INSTALLER SETTING
• Access
Select the Programming slider position and press
for 5 seconds to go into the dedicated installer setting.
5 sec.
INSTALLER SETTINGS
Move the mode slider to position.
Slider
position Icon Installer mode access
1 Set °C/°F temperature unit
2 Set 12 or 24 hours clock
3
Set calibration of the temperature dis-
played
4 Program lock
5 Select the type of control: 2 points or TPI
• Set °C/°F temperature
The pre-set temperature is the degree °C.
1- Rotate the dial to change to
degree Fahrenheit.
2- Then save by pressing or
move the Programming slider.
• Set 12/24 hours clock
The pre-set value is 12 hours clock.
1- Rotate the dial to change to
“24 hr”.
2- Then save by pressing or
move the Programming slider.
• Set calibration
,PSRUWDQW 7KLV RSHUDWLRQ LV UHVHUYHG IRU SURIHVVLRQDO LQVWDOOHUV RQO\ DQ\
wrong changes would result in control anomalies.
Change should only be made if the temperature measured (measured
by a reliable thermometer) is different by at least 1°C compared to the
setpoint temperature of the room thermostat.
The calibration adjusts the temperature measured by the ambient tem-
perature sensor to compensate for a deviation from + 3°C to - 3°C in in-
crements of 0.1°C.
,03257$17%HIRUHFDUU\LQJRXWWKHFDOLEUDWLRQLWLVUHFRPPHQGHGWRZDLW
IRUKDIWHUDVHWSRLQWWHPSHUDWXUHPRGLÀFDWLRQWRLQVXUHWKDWWKHDPELHQW
temperature is stabilized.
The pre-set calibration value is 0.
1- Rotate the dial to adjust the
calibration to the desired value.
2- Then save by pressing or
move the Programming slider.
• Program lock
The product is unlocked by default, OFF is displayed.
When program lock function is turned on then following functions will be
disabled:
- Regardless of physical location, Program Slider will always remain as
SHU581PRGHH[FHSWWRDFFHVV,QVWDOOHUVHWWLQJV
- In Mode Slider AUTO position: Manual override will not work.
- In Comfort Slider position: mode will remain as per AUTO mode.
- BOOST function is disabled.
2- Within 1 minute, press and hold
for 5 seconds the RF test button
on the thermostat. Pairing icon
LVÁDVKLQJ
1- Press and hold for 5 seconds
the RF test button on the
receiver. RF test green light is
blinking.
5 sec
Override RF Test
Override RF Test
5 sec
The thermostat and the receiver are not bonded together at the facto-
ry.
To bond the transmitter and the receiver together, proceed as below:
Note: the receiver is usually located near your boiler.
If you want to check the signal stren-
gth, move the mode slider to po-
sition and then press and release the
RF test button. RF icon blinks for 10
seconds then signal strength appears.
10 is the best signal strength.
4- Thermostat RF icon and re-
ceiver green light will be solid
when pairing is complete.
3- Thermostat RF icon and recei-
ver green light are blinking.
Override RF Test Override RF Test
PAIRING PROCEDURE

4
Registered trademarks - All rights reserved
NEOMITIS
®
LIMITED - 4th Floor, Lincoln House, 300 High Holborn, London WC1V 7JH
Registered in England and Wales No: 9543404
Tel: [phone] - Fax: [phone] - E-mail: [email protected]
Creating innovative solutions for ambient comfort
www.neomitis.com
'LVSOD\GLVDSSHDUVRQWKHUPRVWDW
- Check batteries.
- Replace the 2 batteries. Only use alkaline 1.5V AA (LR6) batteries.
Do not use rechargeable batteries.
The heating does not come on or does not go off.
- Your room thermostat may have been set up close to a source of heat
or on a cold wall – put it in a recommended location (see the “Installing”
section on page 2 for these locations).
- Check that the radio communication works between the thermostat
and the receiver.
- Check if the boiler controlled by the programmable room thermostat is
properly connected to the receiver.
5DGLRWUDQVPLVVLRQLVQRWZRUNLQJSURSHUO\
7KHUHFHLYHULVQRWSLFNLQJXSWKHFRGHVHQWE\WKHWKHUPRVWDW
- Check and replace thermostat batteries .
2- The receiver does not recognize transmitter’s code.
- Pair the room thermostat transmitter with the receiver again See Pairing
section.
7KHUHFHLYHURUWKHWUDQVPLWWHULVDIIHFWHGE\LQWHUIHUHQFH
- Re site the transmitter.
- If possible, re site the receiver away from the source of the interference.
<RXZDQWWRFKDQJHWKHRSHUDWLQJPRGHEXWZKHQ\RXPRYHWKHPRGH
slider nothing happens.
- If the lock symbol is being displayed, then the thermostat is locked.
- Unlock the thermostat by following the instructions for doing so in the
"program lock" section (see page 3).
7KHWKHUPRVWDWLVLQ$XWR0RGHEXWSURJUDPVDUHQRWEHLQJH[HFXWHGE\
the boiler:
- Ensure that the thermostat is in good working condition.
- Change the batteries.
Compliance declaration: we hereby declare under our
sole responsibility that the products described in these
instructions comply with all the main requirements of the LVD
2006/95/EC, EMC 2004/108/EC, RoHS 2011/65/EU and are
PDQXIDFWXUHGXVLQJSURFHVVHVZKLFKDUHFHUWLÀHG,62
V2008.
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
Power supply: 2 alkaline 1.5 V AA (LR6) batteries.
%DWWHU\OLIHDSSUR[\HDUV
Receiver:
- Power supply: 230V~50/60Hz.
- Relay outputs: 5(2)A.
- Rated impulse voltage: 4000V.
- Micro-disconnection: Type 1B.
- Pollution degree: 2.
- Automatic action: 100,000 cycles.
- Class II.
0D[LPXP UDQJH LQ WKH KRPH 15m is typical but this varies depending
on the building construction eg plasterboard lined with metal foil the
number of walls and ceilings that the signal has to pass through and by
the surrounding electromagnetic environment.
Signal sending:HYHU\PLQXWHVPD[LPXPWLPHODJPLQXWHDIWHUVHW
point temperature has been changed.
Standards:
Environment :
- Operation temperature: 0°C to +40°C.
- Manual temperature setting range: from +5°C to +30°C.
- Storage temperature: from -10°C to +60°C.
- Humidity: 80% at +25°C (without condensation)
- Protection rating: IP30.
N.B.: this room thermostat is one part of a complete radio system and will
only work with the 230V AC receiver. Radio emitter, frequency from 2.40
to 2.48 GHz.
Manufactured by: IMHOTEP création.
The on the product indicates that you must dispose of it at the end of
its useful life at a special recycling point, in accordance with European
Directive WEEE 2012/19/EU. If you are replacing it, you can also return it to
the retailer from which you buy the replacement equipment. Thus, it is not
ordinary household waste. Recycling products enables us to protect the
environment and to use less natural resources.
Transmitter Receiver
6DIHW\ R&TTE EMC RoHS 6DIHW\ R&TTE-EMC RoHS
EN62311
EN301489-1
EN301489-3
EN300440-1
EN300440-2
EN50581 EN60730-1
EN62479
EN301489-1
EN301489-3
EN300440-1
EN300440-2
EN50581
• Select 2 points/TPI
The pre-set control algorithm is TPI.
2 points = ON/OFF regulation.
TPI = Proportional control algorithm.
Note regarding the Advanced installer settings: If MODE slider is moved or
QRSUHVVURWDWLRQIRUVHFRQGVLWZLOOGLVFDUGFKDQJHVDQGH[LWLQVWDOOHU
mode.
1- Rotate the dial to ON and
locked.
2- Then save by pressing or
move the Programming slider.
1- Rotate the dial to change to 2
points control algorithm.
2- Then save by pressing or
move the Programming slider.
The radio link between the thermostat and the receiver is lost.
- Check the battery level status.
- Check that the radio communication works between the thermostat
and the receiver.If the radio communication does not work between
the receiver and the thermostat.
- Repeat the pairing between the thermostat and receiver (refer to
the user instructions).
7KHWKHUPRVWDWGRHVQRWFRQWUROSURSHUO\
7KHUPRVWDWVHQVRUPD\EHLQÁXHQFHGE\DVRXUFHRIKHDWRUFROG
- Check that the radio communication works between the thermostat
and receiver.
,IWKHSUREOHPSHUVLVWVFRQWDFW\RXULQVWDOOHU

Overview ..................................................................................................1
Controls and display ...............................................................................1
Settings .....................................................................................................1
Initial power up ..................................................................................................1
Pairing procedure .............................................................................................2
Programming ...........................................................................................2
Set clock..............................................................................................................2
Set the program Comfort period .....................................................................2
Temperatures setting .........................................................................................2
Operating.................................................................................................3
Mode selection and description ......................................................................3
Manual: a temporary change..........................................................................3
Boost ....................................................................................................................3
Factory settings...................................................................................................3
Troubleshooting .......................................................................................4
7HFKQLFDOVSHFLÀFDWLRQV .........................................................................4
What is a room thermostat......................................................................4
RTE1RFa NEO ENG FP V02 29 05 2015
RT1 RF
WIRELESS DAILY PROGRAMMABLE
ROOM THERMOSTAT AND RECEIVER
1
OPERATING INSTRUCTIONS
1- To start: insert the two AA bat-
teries provided into the battery
compartment.
2QFHEDWWHULHVDUHÀWWHGDOO
V\PEROVZLOOEHGLVSOD\HGRQ
the LCD screen as shown for
two seconds.
2- $IWHU  VHFRQGV WKH /&' ZLOO
show:
- The ambient temperature (°C)
VROLG
 5)LFRQÁDVKHV
Note: :KHQWKHEDWWHULHVPXVWEHFKDQJHGDORZEDWWHU\OHYHOLQGLFDWRU
appears on the device.
5HPHPEHUWRWDNHXVHGEDWWHULHVWREDWWHU\FROOHFWLRQSRLQWVVRWKH\FDQ
EHUHF\FOHG
• Thermostat
am
C
C
Batteries
compartment
5RWDU\GLDO
Enter/boost
button
Reset
button
RF test button
0RGHVOLGHU
Programming
VOLGHU
/&'GLVSOD\
• LCD Display
7KDQN\RXIRUSXUFKDVLQJRXU575)ZLUHOHVV
GDLO\ SURJUDPPDEOH GLJLWDO URRP WKHUPRV-
tat.
,W LV E\ OLVWHQLQJ WR \RXU UHTXLUHPHQWV ZH
have created and designed our products
WREHHDV\WRRSHUDWHDQGLQVWDOO
It is this ease of operation that is intended
WRPDNH\RXUOLIHHDVLHUDQGKHOS\RXVDYH
energy and money.
OVERVIEW
CONTROLS AND DISPLAY
INITIAL POWER UP
SETTINGS
Measured room
temperature
Pairing icon
Advanced
settings
Lock
function
Mode
indicator
Hour Days (RT7 RF
RQO\
Programmed
Comfort period
Low battery
icon
Frost protection
icon
&DOOIRUKHDW
icon
Text informations
Temperature
setpoint
Comfort or
Eco mode
icon
Programming sliders sequences:
Time/day Comfort period setting Comfort temperature Eco
temperature Run

5- Repeat for the second comfort period .
4- 7XUQWKHGLDOWRVHWWKHWLPH
0RYHWKH3URJUDPVOLGHUWRWKH
QH[WSRVLWLRQWRFRQÀUPÀQLVK
this setting.
3-7RVHWWKHÀUVW&RPIRUWHQG
time, move the Programming
VOLGHUWRSRVLWLRQ .
 7KHGHIDXOWWLPHLVDP
TEMPERATURES SETTING
Two temperatures can be set: Comfort temperature and Economy
temperature.
2- 7XUQWKHGLDOWRVHWWKHWHPSH-
UDWXUHEHWZHHQ&DQG&
in increments of 0.5°C.
0RYHWKH3URJUDPVOLGHUWRWKH
QH[WSRVLWLRQWRFRQÀUPÀQLVK
this setting.
1- To set the Comfort tempera-
ture, move the Programming
VOLGHUWRSRVLWLRQ .
7KHGHIDXOWWHPSHUDWXUHLV&
)
SET THE PROGRAM COMFORT PERIOD
2- 7XUQWKHGLDOWRVHWWKHWLPH
0RYHWKH3URJUDPVOLGHUWRWKH
QH[WSRVLWLRQWRFRQÀUPÀQLVK
this setting.
1- 7RVHWWKHÀUVW&RPIRUWVWDUW
time, move the Programming
VOLGHUWRSRVLWLRQ .
7KHGHIDXOWWLPHLVDP
2
PROGRAMMING
SET CLOCK
Comfort period Default times
Comfort period 2 Start at 05:00 pm End at 10:00 pm
Note: if you wish not to use a period then this can be done by Coinciding
the End time with Start time.
2- To set the current time, turn the
GLDOFORFNZLVHWRLQFUHPHQWWKH
WLPHWXUQWKHGLDOFRXQWHUFOR-
ckwise, to decrement the time.
1- 7KHWLPHVHWWLQJLVÁDVKLQJ
0RYHWKH3URJUDPPLQJVOLGHUWR
WKHQH[WSRVLWLRQWRFRQÀUPÀQLVK
this setting.
PAIRING PROCEDURE
The thermostat and the receiver are not bonded together at the facto-
ry.
7RERQGWKHWUDQVPLWWHUDQGWKHUHFHLYHUWRJHWKHUSURFHHGDVEHORZ
2- :LWKLQPLQXWHSUHVVDQGKROG
for 5 seconds the RF test button
on the thermostat. Pairing icon
LVÁDVKLQJ
1- 3UHVVDQGKROGIRU5 seconds
the RF test button on the
UHFHLYHU5)WHVWJUHHQOLJKWLV
EOLQNLQJ
5 sec
Override RF Test
Override RF Test
5 sec
1RWHWKHUHFHLYHULVXVXDOO\ORFDWHGQHDU\RXUERLOHU
,I\RXZDQWWR FKHFNWKHVLJQDOVWUHQ-
JWK PRYH WKH PRGH VOLGHU WR po-
VLWLRQDQG WKHQ SUHVV DQG UHOHDVH WKH
5) WHVW EXWWRQ 5) LFRQ EOLQNV IRU 
VHFRQGVWKHQVLJQDOVWUHQJWKDSSHDUV
LVWKHEHVWVLJQDOVWUHQJWK
4- Thermostat RF icon and re-
FHLYHUJUHHQOLJKWZLOOEHVROLG
ZKHQSDLULQJLVFRPSOHWH
3- Thermostat RF icon and recei-
YHUJUHHQOLJKWDUHEOLQNLQJ
Override RF Test Override RF Test

MANUAL: A TEMPORARY CHANGE
MANUAL: Indicates when the
temperature has been moved
IURPVHWSRLQW7KLVWHPSHUDWXUHZLOO
RSHUDWHXQWLOWKHQH[WVZLWFKLQJ
WLPH7KLVLVRQO\DFWLYHZKHQWKH
FRQWUROOHULVLQ$872RU&20)257
mode.
1RWHWKH3URJUDPPLQJVOLGHUPXVWEHLQWKH position.
%2267LVFDQFHOOHGE\DQ\SUHVVRIEXWWRQPRYHPHQWRIGLDORUVOLGHU
:KHQ%2267LVUXQQLQJWKHWLPHDQGGD\GLVDSSHDU7KHPLQXWHDUUD\ZLOO
FRXQWGRZQIURP²WRLQGLFDWHWLPHOHIWLQ%2267PRGH
BOOST
BOOST: Boost mode is a temporary
PRGHZKLFKDOORZV\RXWRRSH-
rate at the comfort temperature
for 1 hour. At the end of 1 hour the
GHYLFHZLOOUHYHUWWRLWVSULRUVHWWLQJ
%2267ZLOOZRUNIURPDQ\UXQQLQJPRGH
BOOST is entered by pressing /button.
3
STANDBY: Permanent
standby mode with frost pro-
WHFWLRQ7KHXQLWLVFRQWUROOLQJ
FRQWLQXRXVO\DWWKHIURVWSUR-
tection temperature factory
set. i.e 8°C.
ECO: Permanent eco mode.
7KHXQLWLVFRQWUROOLQJFRQWL-
QXRXVO\WRWKHHFRWHPSH-
UDWXUHVHWSRLQW7KHGHIDXOW
temperature setting is 10°C
(50°F). Refer to section tem-
peratures setting to change
WKHYDOXHpage 2.
5- 0RYHWKHSURJUDPPRGHVOLGHUWRWKH SRVLWLRQWRFRQÀUPDQG
ÀQLVKDOOSUHYLRXVVHWWLQJV
4- 7XUQWKHGLDOWRVHWWKHWHPSH-
UDWXUHEHWZHHQ&DQG&
in increments of 0.5°C.
0RYHWKH3URJUDPVOLGHUWRWKH
QH[WSRVLWLRQWRFRQÀUPÀQLVK
this setting.
NOTE: This is the temperature
WKDWWKHXQLWZLOOZRUNWRRXWVLGH
of your comfort periods.
3- To set the Economy tempera-
ture, move the Programming
VOLGHUWRSRVLWLRQ .
7KHGHIDXOWWHPSHUDWXUHLV&
(50°F).
OPERATING
MODE SELECTION AND DESCRIPTION
Mode sliders sequences:
Auto mode Comfort mode Economy mode Standby.
AUTO: Automatic mode. The
XQLWLVFRQWUROOLQJWRWKHWLPH
and temperature program
WKDWKDYHEHHQVHOHFWHG
(refer to "programming"
section page 2).
COMFORT: Permanent
comfort mode. The unit is
FRQWUROOLQJFRQWLQXRXVO\WR
the comfort temperature
VHWSRLQW7KHGHIDXOWWHPSH-
rature setting is 20°C)
Refer to section tempera-
tures setting to change the
YDOXH page 2.
FACTORY SETTINGS
$OO/&'GLVSOD\ZLOOEHWXUQHG21IRUVHFRQGVDQGWKHIDFWRU\VHWWLQJV
ZLOOEHUHVWRUHG
1RWH7RUHVWRUHIDFWRU\VHWWLQJVSUHVVDQGKROGGRZQWKLVSDUWIRUPRUH
WKDQVHFRQGVXVLQJWKHWLSRIDSHQ
Settings Factory settings
Comfort temperature 20°C
Eco temperature 10°C
Comfort period 1 6WDUWDWam (QGDWam
Comfort period 2 Start at 05:00 pm End at 10:00 pm

4
Registered trademarks - All rights reserved
NEOMITIS
®
LIMITED - 4th Floor, Lincoln House, 300 High Holborn, London WC1V 7JH
Registered in England and Wales No: 9543404
Tel: [phone] - Fax: [phone] - E-mail: [email protected]
Creating innovative solutions for ambient comfort
www.neomitis.com
The boiler is not heating:
&KHFNWKDWWKH7KHUPRVWDWLVFDOOLQJIRUKHDWLI\HVWKHQWKHWKHUPRVWDWZRXOG
DSSHDUWREHZRUNLQJFKHFNWKDWWKHERLOHUKDVQRWVZLWFKHGLWVHOIRII
If no increase set temperature.
&KHFNWKHSRVLWLRQRIWKHEDWWHULHV5HPRYHWKHPIRU VHFRQGVDQG
UHLQVHUWWKHP,IWKHSUREOHPSHUVLVWVUHSODFHWKHEDWWHULHV
Nothing in the display:
&KHFNWKHSRVLWLRQRIWKHEDWWHULHV5HPRYHWKHPIRU VHFRQGVDQG
UHLQVHUWWKHP,IWKHSUREOHPSHUVLVWVUHSODFHWKHEDWWHULHV
The room temperature is not high enough, the boiler is not providing
enough heat:
- Check the active operating mode VHHSDJH - the room thermostat
PD\EHLQDQ(FR6WDQGE\RU$XWR0RGHHQWDLOLQJDWHPSHUDWXUHGURS
- Check the active desired temperature and increase it if need be (see
page 2).
The temperature in the room is lower than the setpoint temperature:
&KHFNWKHSURJUDPPLQJ7KHWKHUPRVWDWFRXOGEHLQDVFKHGXOHG(FR
period.
(QVXUHWKDWWKHWLPHGLVSOD\HGLVWKHVDPHDVWKHFXUUHQWWLPH
You made a mistake while setting:
<RX MXVW QHHG WR UHVWRUH IDFWRU\ VHWWLQJV DV H[SODLQHG LQ WKH ´)DFWRU\
settings” section VHHSDJH7KLVZLOOUHYHUVHDQ\FKDQJHV\RXPLJKW
have made.
The system is not heating but is on:
- If DQGLQGLFDWRUOLJKWLVRQEXWWKHV\VWHPUHPDLQVFROGWKHQ\RXVKRXOG
FRQWDFW\RXULQVWDOOHU
If the problem persists, then contact your installer.
TROUBLESHOOTING
DQH[SODQDWLRQIRUKRXVHKROGHUV
$ URRP WKHUPRVWDW VLPSO\ VZLWFKHV
the heating system on and off as
necessary. It works by sensing the
air temperature, switching on the
heating when the air temperature
IDOOV EHORZ WKH WKHUPRVWDW VHWWLQJ
and switching it off once this set
temperature has been reached.
Turning a room thermostat to a hi-
JKHUVHWWLQJZLOOQRWPDNHWKHURRP
KHDWXSDQ\IDVWHU+RZTXLFNO\WKHURRPKHDWVXSGHSHQGVRQWKHGH-
VLJQRIWKHKHDWLQJV\VWHPIRUH[DPSOHWKHVL]HRIERLOHUDQGUDGLDWRUV
1HLWKHUGRHVWKHVHWWLQJDIIHFWKRZTXLFNO\WKHURRPFRROVGRZQ
7XUQLQJDURRPWKHUPRVWDWWRDORZHUVHWWLQJZLOOUHVXOWLQWKHURRPEHLQJ
FRQWUROOHGDWDORZHUWHPSHUDWXUHDQGVDYHVHQHUJ\
7KHKHDWLQJV\VWHPZLOOQRWZRUNLIDWLPHVZLWFKRUSURJUDPPHUKDVVZLW-
FKHG LW RII 7KH ZD\ WR VHW DQG XVH \RXU URRP WKHUPRVWDW LV WR ÀQG WKH
ORZHVWWHPSHUDWXUHVHWWLQJWKDW\RXDUHFRPIRUWDEOHZLWKDQGWKHQOHDYH
LWDORQHWRGRLWVMRE7KHEHVWZD\WRGRWKLVLVWRVHWWKHURRPWKHUPRVWDW
WRDORZWHPSHUDWXUH²VD\&²DQGWKHQWXUQLWXSE\RQHGHJUHHHDFK
GD\XQWLO\RXDUHFRPIRUWDEOHZLWKWKHWHPSHUDWXUH<RXZRQ·WKDYHWR
DGMXVWWKHWKHUPRVWDWIXUWKHU$Q\DGMXVWPHQWDERYHWKLVVHWWLQJZLOOZDVWH
energy and cost you more money.
,I\RXUKHDWLQJV\VWHPLVDERLOHUZLWKUDGLDWRUVWKHUHZLOOXVXDOO\EHRQO\
RQHURRPWKHUPRVWDWWRFRQWUROWKHZKROHKRXVH%XW\RXFDQKDYHGLIIH-
UHQW WHPSHUDWXUHV LQ LQGLYLGXDO URRPV E\ LQVWDOOLQJ WKHUPRVWDWLF UDGLDWRU
YDOYHV759V RQLQGLYLGXDOUDGLDWRUV,I\RXGRQ·WKDYH759V \RXVKRXOG
FKRRVHDWHPSHUDWXUHWKDWLVUHDVRQDEOHIRUWKHZKROHKRXVH,I\RXGR
KDYH 759V \RX FDQ FKRRVH D VOLJKWO\ KLJKHU VHWWLQJ WR PDNH VXUH WKDW
HYHQWKHFROGHVWURRPLVFRPIRUWDEOHWKHQSUHYHQWDQ\RYHUKHDWLQJLQ
other rooms by adjusting the TRVs.
5RRPWKHUPRVWDWVQHHG D IUHH ÁRZ RI DLUWR VHQVH WKH WHPSHUDWXUHVR
WKH\ PXVW QRW EH FRYHUHG E\ FXUWDLQV RU EORFNHG E\ IXUQLWXUH 1HDUE\
HOHFWULFÀUHVWHOHYLVLRQVZDOORUWDEOHODPSVPD\SUHYHQWWKHWKHUPRVWDW
IURPZRUNLQJSURSHUO\
WHAT IS A ROOM THERMOSTAT
3OHDVHUHIHUWRWKHLQVWDOOLQJLQVWUXFWLRQVIRUDQ\LQIRUPDWLRQVDERXWEDWWH-
ULHVOLIHVWDQGDUGVDQGSURGXFWHQYLURQPHQW
TECHNICAL SPECIFICATIONS