Copyright © Neoway Technology Co., Ltd
Contents
1 Port Mapping...................................................................................................................... 2
2 Loading USB Driver.......................................................................................................... 3
2.1 Querying Devices ............................................................................................................................... 3
2.2 Adding VID and PID .......................................................................................................................... 3
2.3 Configuring Kernel............................................................................................................................. 3
2.4 Testing AT Commands........................................................................................................................ 4
3 Establishing Connection Using pppd ........................................................................... 8
3.1 Checking Device ................................................................................................................................ 8
3.2 Adding VID and PID .......................................................................................................................... 8
3.3 Adding pppd Driver to Kernel ............................................................................................................ 8
3.4 Dialing up ........................................................................................................................................... 9
3.5 Test and Disconnection..................................................................................................................... 12
3.5.1 Testing the Connection ............................................................................................................ 12
3.5.2 Disconnecting the Connection................................................................................................. 12
4 Establishing Connection Using RMNET.................................................................... 14
4.1 Checking Device .............................................................................................................................. 14
4.2 Adding VID and PID ........................................................................................................................ 14
4.3 Adding GobiNet Driver to Kernel .................................................................................................... 14
4.4 Configuring Before Dialup............................................................................................................... 16
4.5 Dialing Up Using RMNET............................................................................................................... 17
4.6 Test and Disconnection..................................................................................................................... 18
4.6.1 Testing the Connection ............................................................................................................ 18
4.6.2 Disconnecting the Connection................................................................................................. 19
5 Establishing Connection Using RNDIS...................................................................... 20
5.1 Checking Device .............................................................................................................................. 20
5.2 Adding VID and PID ........................................................................................................................ 20
5.3 Adding RNDIS Driver to Kernel ...................................................................................................... 20
5.4 Dialing Up Using RNDIS................................................................................................................. 21
5.5 Test and Disconnection..................................................................................................................... 22
5.5.1 Testing the Connection ............................................................................................................ 22
5.5.2 Disconnecting the Connection................................................................................................. 23
6 Establishing Connection Using ECM.......................................................................... 24
6.1 Checking Device .............................................................................................................................. 24
6.2 Adding VID and PID ........................................................................................................................ 24
