ADTRAN BroadCloud User manual

ADTRAN BroadCloud Analog Gateway Configuration Guide
2
Table of Contents
APPLICATION OVERVIEW....................................................................................................... 3
ONLINE RESOURCES.............................................................................................................. 4
ACCESSING THE CLI............................................................................................................... 4
COMMON CLI COMMANDS..................................................................................................... 5
RESTORING FACTORY DEFAULTS........................................................................................ 5
PRODUCT SUMMARY.............................................................................................................. 6
CONFIGURATION TEMPLATES .............................................................................................. 7
TOTAL ACCESS 900 SERIES TEMPLATE .................................................................................... 8
TOTAL ACCESS 900E SERIES TEMPLATE .................................................................................13
NETVANTA 6250 SERIES.........................................................................................................18

ADTRAN BroadCloud Analog Gateway Configuration Guide
3
Application Overview
Testing was performed using AOS version R11.10.6.
ADTRAN IP Business Gateways are a perfect fit for customers needing analog gateway
functionality. Each IP Business Gateway also includes business-class routing functionality and
stateful inspection firewall.
DTMF Relay
Inband DTMF can be configured on a per voice user basis using the command rtp dtmf-relay
inband. It is recommended that g.711 CODEC be used exclusively if inband DTMF is used.
FAX
The ADTRAN IP Business Gateways will automatically detect modem/FAX tomes and
renegotiate CODEC to g.711. To enable this functionality use the modem-passthrough
command on a per voice user basis.
The ADTRAN IP Business Gateways also support T.38 when used in conjunction with modem-
passthrough. T.38 is enabled on a per voice user basis with the t38 command.
Per Call Caller ID Outbound Block
The ADTRAN IP Business Gateways support per-call caller ID blocking via a SPRE code. To
enable caller ID block, prepend *67 to the dialed number, for example*672565551235.

ADTRAN BroadCloud Analog Gateway Configuration Guide
4
Online Resources
Additional ADTRAN configuration guides are available online in the ADTRAN support forums.
https://supportforums.adtran.com
Recommended documents include:
•Security Best Practices for AOS Products
•AOS Command Reference Guide
•Product-specific Hardware Installation and Quick Start Guides
Accessing the CLI
Console Port
Access the AOS CLI via the CONSOLE port. To establish a connection to the NetVanta unit
CONSOLE port, you need the following items:
•PC with VT100 terminal emulation software
•Straight-through serial cable with a DB-9 (male) connector on one end and the
appropriate interface for your terminal or PC communication port on the other end
1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE port
located on the rear of the unit.
2. Connect the other end of the serial cable to the terminal or PC.
3. Provide power to the unit as appropriate. Refer to the product specific hardware
installation guide at https://supportforums.adtran.com for more details.
4. Once the unit is powered up, open a VT100 terminal session using the following
settings: 9600 baud, 8 data bits, no parity bits, 1 stop bit, and no flow control. Press
<Enter> to activate the AOS CLI.
5. Enter enable at the > prompt and enter the Enable mode password when prompted.
The default password is password.
Telnet or SSH
You can also access the CLI from a Telnet or SSH client. In order to do this, you must know the
IP address of the AOS device. If you do not know the unit’s IP address, you must use the
CONSOLE port to access the CLI. To access the CLI using a Telnet or SSH client, follow these
steps:
1. Connect the unit to your PC, using an Ethernet cable connected to the GIG 0/1 Gigabit
Ethernet port on the rear of the unit.
2. Open a Telnet or SSH client on your computer and enter 10.10.10.1. If you have
changed your unit's IP address, you will need to enter that address.
3. For SSH, log into the unit using the default login (admin) and password (password). For
Telnet, only the default password (password) is required.
4. Enter enable at the > prompt and enter the enable password when prompted. The
default password is password.

ADTRAN BroadCloud Analog Gateway Configuration Guide
5
Common CLI Commands
The following are common CLI commands and tips for getting started with the CLI.
•Entering a question mark (?) shows contextual help and options. For example, entering
? at the prompt will show all commands available from that prompt.
•To view interface statistics, enter show interface <interface type> <interface number>.
•To view the current configuration, enter show running-config.
•To view all the IP addresses currently configured, enter show ip interface brief.
•To view the AOS version, serial number, and other information, enter show version.
•To save the current configuration, enter write.
Restoring Factory Defaults
For information on restoring factory defaults, refer to the guide Restoring an AOS Device to
Factory Default available online at https://supportforums.adtran.com.
Feature
Default Value
IP Address
10.10.10.1
User Name
admin
Password
password
HTTP Server
Enabled
Event History
On
IP Routing
Enabled

ADTRAN BroadCloud Analog Gateway Configuration Guide
6
Product Summary
IPBG Model ADTRAN Part
Number
Analog
Phone
Ports
Analog
Trunk
Ports
PRI
Ports Ethernet Ports
T1
WAN
Ports
TA904 4212904L1 4 1 1 1
TA908 4212908L1 8 1 1 1
TA912 4212912L1 12 1 1 1
TA916 4212916L1 16 1 1 1
TA924 4212924L1 24 1 1 1
TA924+FXO 4212924L2 16 8 1 1 1
TA908e 4243908F1 8 2* 3 4
TA908e+FXO 4243908F2 8 1 2* 3 4
TA916e 4243916F1 16 2* 3 4
TA916e+FXO 4243916F2 16 1 2* 3 4
TA924e 4243924F1 24 2* 3 4
TA924e+FXO 4243924F2 24 1 2* 3 4
TA924e+16/8 4243924F3 16 9 2* 3 4
NV6250-8 4740202G10 8 2* 5 4
NV6250-8+FXO 4740202G11 8 2 2* 5 4
NV6250-16 4740204G10 16 2* 5 4
NV6250-16+FXO 4740204G11 16 2 2* 5 4
NV6250-24 4740206G20 24 2* 5 4
NV6250-24+FXO 4740206G21 24 2 2* 5 4
NV6250-16/8 4740207G21 16 10 2* 5 4
*The PRI ports detract from the total number of T1 ports.
**Lifeline FXO and Analog Failover require additional configuration. For more information, go to
https://supporforums.adtran.com.

ADTRAN BroadCloud Analog Gateway Configuration Guide
7
Configuration Templates
Each template below consists of static configuration settings variable configuration settings. The
variable configuration settings will be based on site and customer specific needs and are noted
by <>. The table below defines the BroadCloud settings required for the configuration template
and where they can be found.
TAG
DEFINITION
<BROADCLOUD SIP
USER>
The BroadCloud SIP User value is found on the BroadCloud MySite
Trunk Group configuration page under the 'Device Settings for
Authentication' section.
<BROADCLOUD SIP
PASSWORD>
The BroadCloud SIP Password value is found on the BroadCloud
MySite Trunk Group configuration page under 'Device Settings for
Authentication’ section.
<BROADCLOUD
REGISTER DOMAIN>
The BroadCloud Register Domain is found on the BroadCloud MySite
Trunk Group configuration page under the ‘Trunk Group Settings’
section.
<BROADCLOUD
OUTBOUND
PROXY>
The BroadCloud Outbound Proxy is found on the BroadCloud MySite
Trunk Group configuration page under the 'Trunk Group Settings'
section.

ADTRAN BroadCloud Analog Gateway Configuration Guide
8
Total Access 900 Series Template
!
!
hostname <DEVICE HOSTNAME>
enable password <PASSWORD>
!
!
!
ip subnet-zero
ip classless
ip routing
ipv6 unicast-routing
!
!
name-server <PRIMARY DNS IP> <SECONDARY DNS IP>
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
service password-encryption
!
username <USERNAME> password <PASSWORD>
!
!
ip firewall
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
interface eth 0/1
ip address <WAN IP ADDRESS> <NETMASK>
ip access-policy Public
media-gateway ip primary
no shutdown
!
!
!
!
!
interface t1 0/1
shutdown
!
interface t1 0/2
shutdown
!
!-------------TOTAL NUMBER OF ANALOG INTERFACES DEPENDS ON DEVICE-----------
!

ADTRAN BroadCloud Analog Gateway Configuration Guide
9
interface fxs 0/1
no shutdown
!
interface fxs 0/2
no shutdown
!
interface fxs 0/3
no shutdown
!
interface fxs 0/4
no shutdown
!
interface fxs 0/5
no shutdown
!
interface fxs 0/6
no shutdown
!
interface fxs 0/7
no shutdown
!
interface fxs 0/8
no shutdown
!
!
!
!
!
!
!
!
ip access-list standard All
permit any
!
!
ip access-list extended Admin
permit tcp any any eq ssh
!
ip access-list extended SIP
permit udp host <PRIMARY POP IP ADDRESS> any eq 5060
permit udp host <SECONDARY POP IP ADDRESS> any eq 5060
!
!
!
!
ip policy-class Private
allow list All self
nat source list All interface gigabit-ethernet 0/1 overload
!
ip policy-class Public
allow list Admin self
allow list SIP self
!
!
!
ip route 0.0.0.0 0.0.0.0 <DEFAULT GW>
!

ADTRAN BroadCloud Analog Gateway Configuration Guide
10
no tftp server
no tftp server overwrite
no http server
no http secure-server
no snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
!
!
!
!
sip
sip udp 5060
no sip tcp
no sip tls
!
!
!
voice feature-mode network
voice forward-mode network
!
!------------USED TO ENABLE PER CALL OUTBOUND CALLER-ID BLOCKING-----------
voice spre-mode override *67
!
!
!
!
!
!
voice dial-plan 1 local NXX-NXX-XXXX
voice dial-plan 2 long-distance 1-NXX-NXX-XXXX
voice dial-plan 3 international 011-$
!
!
!
!-------CUSTOM CODEC LISTS CAN BE CONFIGURED FOR UNIQUE APPLICATIONS---------
voice codec-list 729711
codec g729
codec g711ulaw
!
voice codec-list 711
codec g711ulaw
!
!
!
!
!
voice trunk T01 type sip
sip-server primary <BROADCLOUD OUTBOUND PROXY>
sip-server rollover service-unavailable-or-timeout
sip-server validation register
domain <BROADCLOUD REGISTER DOMAIN>