NETGEAR GS105v5 User manual

Installation Guide
Package contents
• Gigabit Ethernet switch
• Power adapter (varies by region)
• Wall-mount kit
• Installation guide
1. Register with the NETGEAR Insight app
1. Search for NETGEAR Insight and download the latest app.
2. Set up a NETGEAR account if you do not have one.
3. Tap the menu in the upper-left corner.
4. Tap REGISTER ANY NETGEAR DEVICE.
5. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device to scan the serial number bar code.
6. Tap GO.
The switch is registered and added to your account. You can now view the
switch in the NETGEAR Insight app.
Note: Because this is an unmanaged switch, you cannot configure or manage
it in NETGEAR Insight.
2. Connect the switch
ReadyNAS
Gaming
console
Sample connections
Desktop
Smart TV
Access
point Internet
Router
5-Port and 8-Port
Gigabit Ethernet
Unmanaged Switch
GS105v5 and GS108v4
3. Check the LEDs
LED Description
Power • On. The switch is receiving power.
• Off. The switch is not receiving power.
Port
(left and right)
• Both LEDs are solid green. 1000 Mbps link on this port.
• Left LED is solid green. 100 Mbps link on this port.
• Right LED is solid green. 10 Mbps link on this port.
• Blinking green. The port is sending or receiving trafc.
• Off. The switch does not detect a link on this port.
GS108v4
July 2019

Wall-mount the switch
The bottom panel of the switch includes two mount holes. The center-to-center
distance beween the holes is:
• GS105v5: 1.8 in (46 mm)
• GS108v4: 3.15 in (80 mm)
1. Mark the wall where you want to drill the holes.
2. Insert the provided anchors into the wall.
3. Install the provided screws with a No. 2 Phillips screwdriver.
Leave about ¼ inch (6 mm) of each screw protruding from the wall.
4. Align the holes on the bottom panel of the switch with the screws and mount the
switch.
Support
Thank you for purchasing this
NETGEAR product. You can visit
https://www.netgear.com/support/
to register your product, get help,
access the latest downloads and user
manuals, and join our community. We
recommend that you use only ofcial
NETGEAR support resources.
Si ce produit est vendu au Canada,
vous pouvez accéder à ce document
en français canadien à https://www.
netgear.com/support/download/.
(If this product is sold in Canada, you
can access this document in Canadian
French at https://www.netgear.com/
support/download/.)
For regulatory compliance information
including the EU Declaration of
Conformity, visit https://www.netgear.
com/about/regulatory/.
See the regulatory compliance
document before connecting the
power supply.
Do not use this device outdoors. If
you connect cables or devices that are
outdoors to this device, see
https://kb.netgear.com/000057103 for
safety and warranty information.
Technical specications
Specications Description
Network interface RJ-45 connector for 10BASE-T, 100BASE-TX, or 1000BASE-T
Ports GS105v5: 5
GS108v4: 8
Power adapter 12V @ 0.5A DC input
Power consumption GS105v5: 2.7W max.
GS108v4: 4.92W max.
Weight GS105v5: 0.56 lb (0.254 kg)
GS108v4: 1.11 lb (0.5 kg)
Dimensions (W x D x H) GS105v5: 3.97 x 3.7 x 1.02 in. (100.8 x 94 x 25.9 mm)
GS108v4: 6.2 x 4 x 1.1 in. (158 x 102 x 27 mm)
Operating temperature 32–122° F (0–50° C)
Operating humidity 10%–90% relative humidity, noncondensing
Note: You can mount the switch with the
Ethernet ports facing down (at the bottom) as
shown, or with the Ethernet ports facing up.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference
purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland