NETGEAR GS108Tv2 - ProSafe Gigabit Smart Switch Coming... User manual

฀
NETGEAR ProSafe®8-port Gigabit Smart Switch GS108Tv2
Start Here
Follow these instructions to set up your smart switch. Before proceeding with the smart
switch installation, familiarize yourself with the contents of the Resource CD, especially the
reference manuals on your Resource CD.
First, Verify Package Contents
• NETGEAR GS108Tv2 Smart Switch
• Rubber footpads for tabletop installation
• 12V/1A Power Adapter
• Wall-mount kit
•Installation Guide
•Smart Switch Resource CD that includes the NETGEAR Device Manager utility (Smart
Control Center).
Then, Prepare to Install Your Smart Switch
Prepare a PC with an Ethernet adapter and a CD ROM drive.
Next, Install the NETGEAR Device Manager
Utility on a PC
1. Insert the Resource CD into your CD drive.
2. Run the Setup program to install the Smart Control Center utility. The Installation
Wizard will guide you through the installation.
Next, Connect Your Smart Switch in the
Correct Order
These instructions assume you are using DHCP in your network. If you are using static IP
addressing in your network, configure the switch IP address before connecting it to your
network. In the absence of a DHCP server, the switch will default to 192.168.0.239 for its IP
address.
To configure the switch before connecting it to your network:
1. Set up the PC with a Static IP address in the 192.168.0.x subnet, and connect the PC to
the switch. Then, use the Smart Control Center utility to configure the switch.
2. Connect each PC to an RJ-45 network port on the Switch front panel.
Use category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45
connector to make these connections.
3. Connect the switch to your network.
Servers Computers Printers
Smart Switch
GS108T
4. Connect the external power supply and power on the switch.
Note: The NETGEAR GS108T Smart Switch is a PoE Powered Device (PD) and can
receive power from PoE Power Sourcing Equipment (PSE). To power the GS108T
Smart Switch from a PoE power source, such as the NETGEAR GS748TPS ProSafe
Gigabit Stackable PoE Smart Switch, you can connect the PSE to Port 1 on the GS108T
Smart Switch through a standard Cat5 UTP cable. This allows the GS108T Smart
Switch to be powered by PoE.
5. Verify that the PC with the Smart Control Center utility is on the same subnet as the
switch.
Now, Configure the Switch with the NETGEAR
Device Manager Utility
1. Double-click the Smart Control Center icon on your desktop or in Windows
Start menu Programs to run the utility and view this screen.

January 2010
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction implementing
the WEEE Directive.
© 2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
2. Click Discover to find your switch in the network.
The Smart Control Center utility finds the switch and displays its MAC Address, IP Address,
and model number. If you cannot configure your switch, verify that the cable connections are
secure, that the IP address configuration of the PC is in the same subnet as the switch, and
click the Discover button.
3. Click to select the line displaying the details of your switch. If there are multiple Smart
Switches in your network, be sure to select the one you want to configure.
4. Click Web Browser Access to view the switch log in screen.
5. Enter the default password of password in lower case letters and click Login. The
switch will display the switch settings main page. Configure the switch for your
network. Consult the Reference Manual on the Resource CD or the online help in the
switch for assistance with configuration procedures.
After you log in to the switch, the main Web Access menu displays.
Use the configuration menu options to configure your switch.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
Make sure the Ethernet cables are securely plugged in.
For each powered on computer connected to the Smart Switch with a securely plugged
in Ethernet cable, the corresponding Smart Switch port status light will be lit.
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address automatically via
DHCP. For help with this, refer to the GS108Tv2 Software Administration Reference
Manual; a link to the online Reference Manual is on the Resource CD.
If your network uses static IP addresses, be sure the switch and computer are configured
with valid IP addresses.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it
to register your product at http://www.NETGEAR.com/register. Registration is required
before you can use our telephone support service. Registration via our website is strongly
recommended.
Go to http://kbserver.netgear.com for product updates and Web support. For Warranty and
Regional Customer Support information, see the Resource CD that came with your product.
GPL may be included in this product; go to ftp://downloads.netgear.com/files/GPLnotice.pdf
to view the GPL license agreement.