Netum NT-1228BC User manual

Bluetooth Connection
1. Pairing with windows XP or Windows 7/8/10
1) Power on the scanner , a few seconds later the blue indicator will keep flashing.
2) Enter the ‘Control Panel’ - ‘Devices and Printers’ - ‘Add a device’ –select, ‘Bluetooth’ to
add the device to your computer
3) Click ‘Next’, the scanner will beep to indicate a successful pairing, and the light will turn to solid blue.
2. Android: Connect Android Device in Basic Mode
1) Power on the scanner. Make sure the scanner is discoverable (unpaired). a few seconds later the blue
indicator will keep flashing.
2) Touch Home | Menu | Settings | Wireless & Networks | Bluetooth settings
3) Make sure the device has Bluetooth “On”. Scan for devices.
4) In the list of found devices, select “Netum Bluetooth”. Tap Pair.
5) The scanner will connect to the Android device.
6) The scanner will beep once after it has connected and is ready to scan barcodes

3. Pairing with your IOS device
1) Power on the scanner. Make sure the scanner is discoverable (unpaired). a few seconds later the blue
indicator will keepflashing.
2) Click on “Bluetooth” in the left column. Your IOS device will automatically start searching for any
Bluetooth Devices in thearea.
3) Once you have identified the “Netum Bluetooth” on the screen, tap on it and you will
automatically be connected. The scanner’s LED light will turn to solid blue.
Operation mode
A) BT HID Mode (Default)*
No Software installation needed, connects to most devices with bluetooth or USB interface. In this mode, the
scanner interacts with the device like a keyboard. Therefore, the scanner will work with Safari, Notes, and any
other applications that supports an active cursor.
BT HID Mode
Note: this command barcode is only apply for Bluetooth Wireless Mode
Keyboard Language
In order to let scanner upload the codes in a correct way, you have to set the keyboard language beforeyou
use it.
For example
If you use French Keyboard, just scan barcode of "French Keyboard", after that scanner will uploadbarcodes
according to French keyboard layout. American Keyboard is set by default, if you use a US keyboard youcan
just skip this part.