XtendLan XL-ICA-H660-SC110 User manual

XL-ICA-H660-SC110
6-inch Mega Pixel IP Speed Dome User’s Manual

2
Table of Contents
1 FEATURES AND FUNCTIONS .................................................................................... 6
1.1 General Introduction ...........................................................................................................................................6
1.2 Feature .................................................................................................................................................................6
1.2.1 Storage............................................................................................................................................................6
1.2.2 Network Monitor.............................................................................................................................................6
1.2.3 Support multiple protocols ............................................................................................................................6
1.2.4 Proportional Pan and Tilt...............................................................................................................................6
1.2.5 Preset Setup and Recall ...............................................................................................................................6
1.2.6 Auto Scan........................................................................................................................................................6
1.2.7 Auto Cruise (Touring)....................................................................................................................................6
1.2.8 Auto Pattern....................................................................................................................................................7
1.2.9 Action on Alarm..............................................................................................................................................7
1.2.10 Auto Flip......................................................................................................................................................7
1.2.11 Self-diagnosis ............................................................................................................................................7
1.2.12 Day/Night Mode (B/W & Color Mode) ....................................................................................................7
1.2.13 Auto Focus .................................................................................................................................................7
1.2.14 Pan Tilt and Zoom.....................................................................................................................................7
1.2.15 3D Intelligent Location..............................................................................................................................7
2 CABLE CONNECTIO N .................................................. .............................................. . 8
2.1 RS485 and Power Cable Conne ction ..............................................................................................................8
2.2 Alarm Cable Connection.................................................................................................................................9
2.2.1 System Layout..............................................................................................................................................10
2.2.2 Keyboard Connection..................................................................................................................................10
3 QUICK CONFIGURATION TOOL .............................................................................. 12
3.1 O ve rv ie w ............................................................................................................................................................12
3.2 Operation ...........................................................................................................................................................12

3
4 WEB OPERATION ..................................................................................................... 15
4.1 O ve rv ie w ............................................................................................................................................................15
4.2 Login ...................................................................................................................................................................15
5 PERFORMANCE SPECIFICATION ........................................................................... 18
6 FUNCTION SPECIFICATIO N ................................ .................................................... . 19
7 FACTORY DEFAULT SETUP .................................................................................... 22
8 FA Q ............................................................................................................................ 26
9 APPENDIX I DAILY MAINTENANCE AND IP SPEED DOME FAQ ........................... 27
9.1 Daily Mainte nance ............................................................................................................................................27
9.2 FAQ.....................................................................................................................................................................27
10 APPENDIX Ⅰ I THUNDER PROOF AND SURGE PROTECTIO N ................................ 28

Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this IP speed dome features and functions.
Please keep it well for future reference.
Before installation and operation, please read the following safeguard and warning
carefully!

5
Important Safeguard and Warning
1．Electrical Safety
All installation and operation should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation
2．Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
This series product must use split type package during the transportation.
We are not liable for any damage or problem result from the integrated package during the
transportation.
3．Installation
Keep upwards. Handle with care.
Does not touch the lower dome cover; it may affect the video quality,
Do not apply power to the dome before completing installation.
4．Qualified Engineers Needed
All installation here should be done by the qualified engineers.
All the examination and repair should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
6．Environment
This product has been tested and found to comply with the IP67 standard of Degrees of
protection provided by enclosure (IP Code).
The dome should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
7．About Camera
Camera should be installed away from direct sunlight or other strong artificial lights to avoid
blooming and smear.
When the camera is aiming at bright light or object, such as spotlight or sun, smear or blooming
may appear.
Only use mild detergent or dry cloth to clean the camera.
8. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in
the package:
Contact you local retailer ASAP if something is missing in your package.

6
1 Features and Functions
1.1 General Introduction
This 6-inch mega pixel IP dome integrates the remote network monitor function and integration
high intelligent speed dome together. It is easy to install and operate. This series IP speed dome
has mega pixel vivid video and supports intelligent recognition, alarm activation, wide dynamic
region (WDR) function and etc. It can guarantee the stability of audio/video data transmission
and control data transmission via network technology, so that this series product can realize real-
time monitor in anytime and at any where. Working with the built-in PTZ, the 6-inch mega pixel IP
speed dome can implement the quick, accurate and convenient positioning surveillance.
1.2 Feature
This series IP speed dome has the following features:
1.2.1 Storage
z Support central server backup function in accordance with your configuration and setup to
save audio/video data.
z Support record via Web and the recorded file are storage in the client-end PC.
z Support local Micro SD card hot swap and memory backup function, support short time
backup when encounter network connection failure.
1.2.2 Network Monitor
z Supports audio/video data transmit to network terminal and then decode. Audio and video
transmission protocol: HTTP, TCP, UDP, MULTICASTand RTP/RTCP and etc.
z Support Web access. Max supports 10 connections.
1.2.3 Support multiple protocols
z This series speed dome supports and intelligently recognize universally used protocols
PELCO-P and PELCO-D. You can use various devices (such as matrix, control keyboard
and DVR) and protocols to control the IP speed dome.
1.2.4 Proportional Pan and Tilt
z This function keeps the image from moving too fast when there is a large amount of zoom.
z Speed dome continually decreases or increases pan and tilt speeds in proportion to depth of
zoom. When zooms speed is increasing, the camera moving speed becomes slow. When
zooms speed is decreasing, the camera moving speed becomes fast.
1.2.5 Preset Setup and Recall
z Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the
memory so that you can quickly adjust the dome and PTZ to the correct position. This series
speed dome supports 200 presets.
1.2.6 Auto Scan
z Camera scans back and forth regularly in a horizontal field. Here you need to set left and
right limit and scan speed. This series IP speed dome max supports 5 scanning paths either
via control keyboard or via the menu in screen.
1.2.7 Auto Cruise (Touring)
z Auto cruise is to add presets into a routine in a desired order and then set time and stop
duration for each address. The dome will begin an auto cruise between these presets.
System supports 8 cruise paths. Each cruise consists of max 32 presets.

7
1.2.8 Auto Pattern
z Auto pattern is to memorize dome operation such as pan, tilt, and zoom to repeat. Focus
and iris are in auto mode during auto pattern. This series IP speed dome supports 5 pattern
paths.
1.2.9 Action on Alarm
z This series speed dome support seven alarm inputs (normal close or normal open). Each
alarm has tree types of PTZ actions. It can be individually programmed to initiated pattern, or
go to an associated preset, cruise (touring) when received. The IP dome will return to a
previously programmed state after alarm acknowledgement or to its previous position before
alarm.
z For video loss alarm or camera masking alarm, the IP speed dome can alert you according
to your setup (either pop up prompt or alarm). System can activate corresponding channel to
record video or snapshot. The alarm information will be saved in the SD card or be sent to
you via email.
1.2.10 Auto Flip
z This function allows you to trace the object manually. As long as you continue to hold the
keyboard joystick in the down position, the dome rotates 180 degrees and repositions itself
for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.11 Self-diagnosis
There is a self-diagnosis procedure when IP dome boots up.
z Tilt and vertical engine check
z Camera diagnostics (mainly the zoom function diagnostics)
1.2.12 Day/Night Mode (B/W & Color Mode)
In auto mode, the camera can automatically adjust CCD light level.
1.2.13 Auto Focus
z Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions
to get vivid image. You can use FAR or NEAR button to adjust focus manually.
1.2.14 Pan Tilt and Zoom
z Supports zoom in and zoom out during tilt and pan movement. In this period focus and iris
are both in auto mode to get vivid video.
1.2.15 3D Intelligent Location
z Working with DVR or WEB, just click part of the current scene, that zone will be displayed in
the central window and automatically zooms. All of these allow you to trace precisely.

8
2 Cable Connection
2.1 RS485 and Power Cable Connection
This series mega pixel IP speed dome has audio cable port, network port and power port. These
ports are to input audio, output signal, network data and connect to the power source.
Please connect the audio cable to the audio port of the device board, connect the network cable
to the network port of the device board, and connect the power cable to the power socket of the
device board respectively. See Figure 2-1 and Figure 2-2.
Network Cable Network Port
Figure 2-1
Figure 2-2
Name
Function
OUT
Audio output port.
GND
Ground port.
AUDIO
IN
Audio connection port.
Power port connection interface is shown as in Figure 2-3.

9
Figure 2-3
Name
Function
AC24V
24V power port. Connect to the power cable.
EARTH
Ground port.
AC24V
24V power port. Connect to power cable.
2.2 Alarm Cable Connection
Open the dome cover and take PTZ chip core out. Turn the core upside down; you can see the
alarm port. See Figure 2-4.
Figure 2-4
Name
Function
Alarm out：1-2
z Two alarm output channels. When there is an alarm from current
channel, system activates relay or not.
z Alarm output relay default setup is NO. You can use the jump-
cap near the power board relay to set.
z NO：Normal open alarm output.
z NC：Normal close alarm output.
GND
Alarm input ground end.
Alarm in：1-7
z Seven alarm input channels. They are to receive relay signal
from the external alarm source. You can go to dome menu to
activate specified preset or patter.
z When the activation mode is NO (normal open), dome alarms
when there is low voltage. High voltage will not activate the
alarm.
z When the activation mode is NC (normal close), dome alarms
when there is high voltage. Low voltage will not activate the
alarm.
Note:
z Dome alarm input message is ground mode.
z Dome alarm input signal are two modes: normal open and

10
normal close.
2.2.1 System Layout
2.2.1.1 System Connection
Please refer to the following interface for Ethernet connection information.
Figure 2-5
Please refer to Figure 2-6 for alarm cable connection.
Figure 2-6
2.2.2 Keyboard Connection
This series speed dome protocol is open and supports multiple popular system platforms in
today’s market. Please feel free to contact us if some matrix systems do not support dome
camera communication protocol. The most direct and easy way is to use current system to
process video signal and add some control keyboards to control speed dome. See Figure 2-7.

11
Figure 2-7

12
3 Quick Configu ration Tool
3.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you
can use it to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
3.2 Operation
Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 3-1.
In the device list interface, you can view device IP address, port number, subnet mask, default
gateway, MAC address and etc.
Figure 3-1
Select one IP address and then right click mouse, you can see an interface is shown as in Figure
3-2.

13
Figure 3-2
Select the “Open Device Web” item; you can go to the corresponding web login interface. See
Figure 3-3.
Figure 3-3
If you want to modify the device IP address without logging in the device web interface, you can
go to the configuration tool main interface to set.
In the configuration tool search interface (Figure 3-1), please select a device IP address and then
double click it to open the login interface. Or you can select an IP address and then click the
Login button to go to the login interface. See Figure 3-4.
In Figure 3-4, you can view device IP address, user name, password and port. Please modify the
corresponding information to login.
Please note the port information here shall be identical with the port value you set in TCP port in
Web Network interface. Otherwise, you can not login the device.
If you are use device background upgrade port 3800 to login, other setups are all invalid.
Figure 3-4
After you logged in, the configuration tool main interface is shown as below. See Figure 3-5.

14
Figure 3-5
For detailed information and operation instruction of the quick configuration tool, please
refer to the Quick Configuration Tool User’s Manual included in the resources CD.

15
4 Web Operation
4.1 Overview
IP speed dome support Web access via PC to manage device.
Web operation consists of the following operation sections: monitor channel, record search,
alarm setup, system setup, PTZ control and monitor window.
4.2 Login
Before web operation, please check the following items:
z PC and IP speed dome connection is OK.
z You have set PC IP address, IP speed dome IP address, subnet mask and gateway.
(Please set the IP address of the same section for the PC and IP speed dome. Please input
corresponding gateway and subnet mask if there are routers.) IP speed dome default IP
address is 192.168.1.108.
z Use order ping ***.***.***.***(IP speed dome IP address) to check connection is OK or not.
Usually the return TTL value should be less than 255.
Open IE and input device IP address in the address column. For example, if your device IP is
192.168.1.108(factory default IP address), then please input http:// 192.168.1.108 in IE address
column. See Figure 4-1. Input your
IP
address here.
Figure 4-1
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can’t download the ActiveX file, please modify your settings as follows. See Figure 4-2.

16
Figure 4-2
After installation, the interface is shown as below. See Figure 4-3.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
Figure 4-3
After you logged in, you can see the main window. See Figure 4-4.
There are six sections:

17
z Section 1: Monitor channel menu tree
z Section 2: System menu
z Section3: PTZ control
z Section4: Color setup and other setup
z Section5: Preview window
z Section 6: Monitor window switch ②
③
①
④
⑤
Figure 4-4
Please refer to 6-inch mega pixel IP Speed Dome Web Operation Manual included in the
resource CD for detailed information.

18
5 Pe r f ormance Specification
Specification
Index
Sensor Type
1/3-inch CCD
Video Format
PAL/NTSC
Pixel
1.30 mega pixle，1280（Pan）
*960（Tilt）
Min Illumination
[email protected]
Camera
Shutter Speed
1/4～1/100000
Standard Supported
PAL : 1f/s-25f/s
NTSC: 1f/s-30f/s
Encode capacity
One 720P+one D1
Encode bit stream
1.3M（1280*960）
720（1280*720）
VGA（640*480）
QVGA（320*240）
D1（704*576/704*480）
HD1（352*576/352*480）
CIF（352*288/352*240）
QCIF（176*144/176*128）
QQVGA（160*128）
Video
Encode Speed
1.3M signal mode:
NTSC 1f/s-15s for each channel
(Adjustable).
PAL 1f/s-1f/s for each channel
(Adjustable)
720P signal mode;
NTSC 1f/s-30f/s for each channel
(Adjustable).
PAL 1f/s-25f/s for each channel
(Adjustable)
Power Consumption
≤50W
Power
24V AC
Temperature
-40～+60ºC
Protection Level
IP66
Working Environment Humidity
＜90％
Package Dimension
525mm*325mm*340mm
Weight
5kg

19
6 Function Specification
Specification
Note
Zoom Adjustment
Manual
Focus Adjustment
Auto/Manual adjust
Lens Control
Aperture Adjustment
Auto /manual adjust
Preset
255 (（PELCOD、PELCOP
protocl）
Auto Tour
8
Auto Pattern
5
Auto Scan
5
Focus speed auto control
Auto adjusts the speed according
to the focus distance.
Auto flip
Tilt 90 degrees auto flip to realize
180 degrees continuing trace
Auto rotation speed
0.1º～300º/s
Preset max speed
300º
PTZ Control
Manual tilt flip speed
0.1º～150º/s
White balance adjustment
Auto
Video Process
Color/B&W(Day/Night) switch
Auto
Signal input type of camera
property
1.3M /720P
Video compression
H.264 video comrpression
standard
Motion Detection
Support motion detection zone
setup.
Video
Dual-stream
Support one main stream and one
extra stream.
Bidirectional Talk .Delaying value
within 200ms
Audio
Audio Listening .Support 1-ch
MIC input.
WEB Access
PPPoE
DHCP
DDNS
SMTP
NTP
DNS
Support IP address auto search
function
Network
Support IP address filter function
Schedule Record
6 periods in one day. This series
product does not support this
function.
Record
Manual Record
After enabling manual record, no
matter system is in schedule or
alarm status or not, system just
begins recording.

20
Alarm Record
System automatically enables
recording function when alarm
occurred.
Motion Detection Record
When input video changes,
system automatically enables
record operation.
Time Title Display
Transparent value ranges from 0
to 255. O means completely
transparent and 255 is opaque.
OSD
Channel Title Display
Please refer to the above
information.
Local Micro SD storage .Support
high-speed card/low-speed card.
Storage
Based on SDK network storage
2-ch alarm output.
Alarm
7-ch local alarm/network alarm
input
Activate alarm via motion
detection or external input.
Please enable pre-record function
when activating the alarm
Upload image via email.
Send out alarm notice via email,
external port.
Need anti-dither supported when
alarm occurs frequently.
Event Management
Support video short-time buffer
storage function before or after
alarm .
Pre-record is 2Mbytes
Buffer storage 5 seconds video
Control
PTZ control via Web
Network remote
upgrade .Working wit the upgrade
tool in the resource CD.
Device Upgrade
COM upgrade. Working wit the
upgrade tool in the resource CD.
Device Management
Log in the client-end software in
the PC to realize real-time
monitor.
IP speed dome provides user
interface to modify device
information, video information,
record setup, motion detection
setup, alarm setup, OSD
information.
Parameter Configuration
IP speed dome provides user
interface to search log, status,
user management, email setup,
time and date setup to check
system running information.
Log
Important event log record. It can
record the following information：
System operation, setup
operation, alarm event, record