NEUTRIK PowerCON HC Quick setup guide

Slide bushing ( 1 ) and chuck ( 2) onto the cable end.
Less 15 mm please use reducing piece (3).
Prepare cable as shown.
Consider excessive length of PE conductor for
slackening.
Strip the wires.
If cable O.D.:
ASSEMBLY INSTRUCTIONS CABLE CONNECTOR
|
A
B
A
[0.354"]
9mm
FEATURES
250 Vac, 32 Amp (at ambient temperatures up to 35°C) / 30 Amp for cUR
Cable O.D. 17 mm (general range: 8.0 to 20.0 mm)
Wiring: Cable Connector: Screw-type terminals for stranded wires 6.0 mm (AWG 10)
Chassis Connector: Screw-type terminals for wires 6.0 mm (AWG 10)
2
2
·
·
·
IMPORTANT SAFETY INSTRUCTION
Attention: Connector without breaking capacity acc. IEC 61984 - must not be engaged or
disengaged when under load or live.
Insert wires into terminals L, N, PE and tighten.
ATTENTION: Max torque 180 cNm
Wiring: *
C
1
2
25 mm 15 mm
C
3
1.
2.
SAFETY & ASSEMBLY INSTRUCTION
PowerCON HC Locking 2P+PE AC appliance coupler
®
|
Page 1
LBlack
NWhite
PE Green
TORX TX 10
socket screws
®

Wiring:
Panel cutout (rear side):
Strip the wires. Insert wires to terminals and tighten.
*
ATTENTION: Max torque 130 cNm
PowerCON HC
Assembled Connector
1. Push insert and chuck into housing.
2. Tighten bushing using open wrench 27 mm,
min. torque 3.5 Nm.
Important: Align the chuck and insert by
positioning the nose into keyway.
[0.394"]
10 mm
NWhite
PE Green
LBlack
DD
1.
2.
25.0
30.0
Ø30.0
Ø
3.8
Note: Conductor colors according to color coding of North American cords.
1.
2.
Draft. Nr.: BDA 178 Update: 22.07.2008/ 3102M1481 II Data subject to change without prior notice. 2008 NEUTRIK . ALL RIGHTS RESERVED.©®
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH T: F:
T: F:
T: F:
Ltd. T: F:
DE / NL / AT
FR
JP
HK
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Hong Kong
www.neutrik.com
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
T: F:
T: F:
T: F:
() T: F:
LI
CH
USA
UK
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811 441 +44 1983 / 811 439
Page 2
ASSEMBLY INSTRUCTIONS RECEPTACLE
|