NEUTRIK NAC3FX-W Product guide

OPERATING & ASSEMBLY INSTRUCTION
NAC3FX-W powerCON TRUE1
|
R
A. OPERATING INSTRUCTION
Application:
The powerCON TRUE1 system is certified as connector with breaking capacity according IEC 60320,
VDE 0625. It is intended for use as appliance couplers and interconnection couplers. It serves to
supply power to an appliance and from an appliance to another equipment. To be installed by qualified
person only.
Connector Assignment:
APPLIANCE
APPLIANCE INLET APPLIANCE OUTLET
COMBINATION
INLET OUTLET
NAC3PX
NAC3MPX NAC3FPX
NAC3FPX-ST
20
250
PS
EJET
20
250
P S
EJET
16
250
20
250
NAC 3MX-W
20
250
P S
EJET
16
250
20
250
NAC3 MX-W
20
250
PS
EJET
Power IN
Power OUT
Power IN
Power OUT
NAC3MX-W
(Plug connector)
NAC3FX-W
(Connector)
NAC3FX-W
(Connector)
NAC3MX-W
(Plug connector)
B. ASSEMBLY INSTRUCTION
[0.32"]
8 mm
[0.787”]
20 mm
[0.9”]
PE 23 mm
Separate the
housing from the
bushing (cable
remain in bushing)
B
Approval based:
Rating:
Cable Type:
Strain Relief:
Cable O.D.:
VDE
EN 60320-1/EN60320-2-2
250 V ac / 16 A
2
H05VV-F3G 1.0 mm
2
H05VV-F3G 1.5 - 2.5 mm
2
H07RN-F3G 1.5 mm
White chuck
6.0 - 12.0 mm
, Length max. 2 m
UL
UL 498 / CSA C22.2 No. 182.3
250 V ac / 20 A
SJTOW, SJOOW 3 x 12 AWG
White chuck
6.0 - 12.0 mm
C
[0.32"]
8 mm
[0.787”]
20 mm
[0.9”]
PE 23 mm
VDE (EN 60320-1/EN60320-2-2) UL (UL 498 / CSA C22.2 No. 182.3)
20
250
PS
EJET
20
250
PS
EJET
AInsert cable into the
bushing and housing.
Note: “Apply cable
pulling lubricant to
cable jacket.”
40 -50mm
Place chuck over the
cable.
Prepare cable as
shown.
D
C
Page 1BDA 378

ASSEMBLY INSTRUCTION powerCON TRUE1
I
R
Draft. Nr.: BDA 378 Update: 08.04.2014
I I Data subject to change without prior notice. 2014 NEUTRIK . ALL RIGHTS RESERVED. NEUTRIK are registered trademark.
® ®
©
www.neutrik.com Page 2
G
Slide the cable into the contacts and clamp with
the screw with Torx size T8.
Wiring VDE UL
Slide chuck onto insert (1) and then both into
housing (2).
Slide the cable clamp (3) bushing up the cable
and tighten it with the tool (4) as shown (5).
(Tool available: Art. No. HTAC)
Lbrown black
Nblue white
green/yellow green
Þ
Þ
Þ
Important: Align the chuck by positioning the
nose into keyway.
Important: Yellow O-ring to hide to achieve IP
protection (6).
20
250
P S
EJET
-w
-w
2.
3.
1.
Disassembly (open twist lock):
1. Press with screw driver to unlock
2. Turn bushing while still pressing locking.
1.
2.
-w
-w
-w
-w
Torque Value 0.7 Nm
Torx size
T8
-w
-w
20
250
PS
EJET
5.
6.
Torque Value 2.0Nm
PRESS FIRMLY
4.
Important:
Push and turn simultaneously.
FORCE
LIECHTENSTEIN
20
250
P S
EJET
16
250
20
250
NA C3MX-W
CAUTION
To ensure protection
category, do not expose
the connection to
bending forces (e.g. do
not attach loads to the
cable, no free-dangling
cable windings etc.).
E
F
Wrench size
13 mm
NEUTRIK AG LI T: +423 /237 24 24 F: +423/232 53 93
NEUTRIK USA Inc. USA T: +1 704 /972 3050 F: +1 704/438 9202
( )
NEUTRIK UK Ltd. UK T: +44 1983 /811 441 F: +44 1983/811 439
NEUTRIK Vertriebs GmbH DE /NL /AT/DK T: +49 8131 /280 890 F: +49 8131/280 830
NEUTRIK France FR T: +33 1/4131 6750 F: +33 1 /4131 0511
NEUTRIK Tokyo Ltd. JP T: +81 3/3663 4733 F: +81 3 /3663 4796
NEUTRIK Hong Kong Ltd. HK T: +852/2687 6055 F: +852/2687 6052
NEUTRIK India Pvt. Ltd. IND T: +91 /982 05 43 424 F: +91/22 26163 540