NEUTRIK Speakon SPX Series User manual

Assembly of the Connector:
INFO to the screw driver:
Place bushing and chuck over cable.
Prepare cable as shown.
Insert wires into terminals and secure clamp
terminals with screw driver (Pozidrive ).
For easy wiring especially on big cables, first
screw on the inner conntacts 1+ and 2+ and
afterwards the outer contacts 1- and 2- !
Push chuck up to housing .
Tighten the bushing
Important is the stripping length of 25 mm and
12 mm.
Pozidrive #1 Philips
®
Important: Align the chuck by positioning
the nose into the recess.
DO NOT USE!
12 mm [0.5"]
25 mm [1.0"]
-1-
A
B
C
D
E
A
B
C
F
F
2+
1+
1-
2-
2+ 2-
1- 1+
D
E
ASSEMBLY INSTRUCTION
NL4FX / NL4FRX
Speakon SPX Series Lockable Loudspeaker Connector
®

Assembly of the Conversion Kit:
Handling:
Open the bushing.
Slide the bushing and the chuck back.
Bend the cable as shown.
Position the two conversion shells to fit on
the connector thread.
Press together and fix by screw.
Slide the chuck onto the housing and fasten
the bushing.
Engagement:
Separation:
Important: Align the chuck by positioning
the nose into the recess.
A
B
C
D
E
A
B
C
D
E
F
LIECHTENSTEIN
1.
2.
F
F
1.
2.
3.
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK USA Inc.
NEUTRIK UK Ltd.
T: F:
T: F:
T: F:
() T: F:
LI
CH
USA
UK
+423 / 237 24 24 +423 / 232 53 93
+41 44 / 736 5010 +41 44 / 736 5011
+1 732 / 901 9488 +1 732 / 901 9608
+44 1983 / 811441 +44 1983 / 811 439
Draft. Nr.: BDA 114 Update: 12..03.2008/ 3102M1171 II Data subject to change without prior notice. 2008NEUTRIK . ALL RIGHTS RESERVED.©®
NEUTRIK
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Vertriebs GmbH T: F:
T: F:
T: F:
Ltd. T: F:
DE / NL / AT
FR
JP
HK
+49 8131 / 280 890 +49 8131 / 280 830
+33 1 / 4131 6750 +33 1 / 4131 0511
+81 3 / 3663 4733 +81 3 / 3663 4796
+852 / 2687 6055 +852 / 2687 6052
Hong Kong
www.neutrik.com